TPS22990
- Integrated Single Channel Load Switch
- VBIAS Voltage Range: 2.5 V to 5.5 V
- VIN Voltage Range: 0.6 V to VBIAS
- On-Resistance
- RON = 3.9 mΩ (typical) at VIN = 5
V
(VBIAS = 5 V) - RON = 3.9 mΩ (typical) at VIN =
3.3 V
(VBIAS = 3.3 V)
- RON = 3.9 mΩ (typical) at VIN = 5
V
- 10-A Maximum Continuous Switch Current
- Quiescent Current
- IQ,VBIAS = 63 µA at VBIAS = 5 V
- Shutdown Current
- ISD,VBIAS = 5.5 µA at VBIAS = 5 V
- ISD,VIN = 4 nA at VBIAS = 5 V, VIN = 5 V
- Controlled and Adjustable Slew Rate through CT
- Power Good (PG) Indicator
- Quick Output Discharge (QOD) (TPS22990 Only)
- 3-mm × 2-mm SON 10-pin Package with Thermal Pad
- ESD Performance Tested per JESD
22
- 2-kV HBM and 1-kV CDM
The TPS22990 product family consists of two devices: TPS22990 and TPS22990N. Each device is a 3.9-mΩ, single-channel load switch with a controlled and adjustable turn on and integrated PG indicator.
The devices contain an N-channel MOSFET that can operate over an input voltage range of
0.6 V to 5.5 V and can support a maximum continuous current of
10 A. The wide input voltage range and high current capability enable the devices to be used
across multiple designs and end equipments. 3.9-mΩ On-resistance minimizes the voltage drop across
the load switch and power loss from the load switch.
The controlled rise time for the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating power supply droop. The adjustable slew rate through CT provides the design flexibility to trade off inrush current and power up timing requirements. Integrated PG indicator notifies the system about the status of the load switch to facilitate seamless power sequencing.
The TPS22990 has an optional 218-Ω On-chip resistor for quick discharge of the output when switch is disabled to avoid any unknown state caused by floating supply to the downstream load.
The TPS22990 is available in a small, space-saving
3-mm × 2-mm 10-SON package with integrated thermal pad allowing for high power dissipation.
The device is characterized for operation over the free-air temperature range of –40°C to +105°C.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS22990 5.5-V, 10-A, 3.9-mΩ On-Resistance Load Switch datasheet (Rev. C) | PDF | HTML | 2017. 9. 13 | |
| Application brief | Optimize Power Distribution in Low Voltage Applications with Integrated Load Swi | PDF | HTML | 2020. 8. 25 | ||
| e북 | 11 Ways to Protect Your Power Path | 2019. 7. 3 | |||
| 애플리케이션 노트 | Basics of Power Switches (Rev. A) | PDF | HTML | 2019. 4. 26 | ||
| 애플리케이션 노트 | Load Switch Thermal Considerations (Rev. A) | 2018. 10. 11 | |||
| 애플리케이션 노트 | Basics of Load Switches (Rev. A) | 2018. 9. 5 | |||
| 애플리케이션 노트 | Selecting a Load Switch to Replace a Discrete Solution | 2017. 4. 30 | |||
| 애플리케이션 노트 | Timing of Load Switches | 2017. 4. 27 | |||
| 애플리케이션 노트 | Fundamentals of On-Resistance in Load Switches | 2016. 6. 9 | |||
| 기술 문서 | When to use load switches in place of discrete MOSFETs | PDF | HTML | 2016. 2. 3 | ||
| 애플리케이션 노트 | Managing Inrush Current (Rev. A) | 2015. 5. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS22990EVM — TPS22990 5.5V, 10A, 3.9mΩ 온 저항 부하 스위치 평가 모듈
TPS22990 평가 모듈(EVM)은 TPS22990 부하 스위치 평가 용도로 완조립 및 테스트를 거친 회로입니다. TPS22990EVM을 사용하면 TPS22990에 다양한 부하 조건(0A~10A)에서 다양한 입력 전압(0.8V~5.5V)을 적용해 볼 수 있습니다. 온 저항, 상승 시간 및 출력 풀다운 저항 등의 매개 변수를 쉽고 정확하게 평가합니다.
TPS22990NEVM — TPS22990N 5.5V, 10A, 3.9mΩ 온 저항 부하 스위치 평가 모듈
TPS22990N 평가 모듈(EVM)은 TPS22990N 부하 스위치 평가 용도로 완조립 및 테스트를 거친 회로입니다. TPS22990NEVM을 사용하면 다양한 부하 조건(0A~10 A)에서 TPS22990N에 여러 다른 입력 전압(0.8V~5.5V)을 인가할 수 있습니다. 온 저항, 상승 시간 및 출력 풀다운 저항 등의 매개 변수를 쉽고 정확하게 평가합니다.
TPS22990 Unencrypted PSpice Transient Model Package (Rev. B)
TPS22990N Unencrypted PSpice Transient Model Package (Rev. A)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DML) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.