TPS22964C
- Integrated N-Channel Load Switch
- Input Voltage Range: 1 V to 5.5 V
- Internal Pass-FET RDSON = 8 mΩ (Typ)
- Ultra-Low ON-Resistance
- RON = 13 mΩ (Typ) at VIN = 5 V
- RON = 14 mΩ (Typ) at VIN = 3.3 V
- RON = 18 mΩ (Typ) at VIN = 1.8 V
- 3A Maximum Continuous Switch Current
- Reverse Current Protection (When Disabled)
- Low Shutdown Current (760 nA)
- Low Threshold 1.3-V GPIO Control Input
- Controlled Slew-Rate to Avoid Inrush Current
- Quick Output Discharge (TPS22964 only)
- Six Terminal Wafer-Chip-Scale Package (Nominal Dimensions Shown - See Addendum for
Details)
- 0.9 mm x 1.4 mm, 0.5 mm Pitch, 0.5 mm Height (YZP)
- ESD Performance Tested Per JESD 22
- 2-kV Human-Body Model (A114-B, Class II)
- 500-V Charged-Device Model (C101)
The TPS22963/64 is a small, ultra-low RON load switch with controlled turn on. The device contains a low RDSON N-Channel MOSFET that can operate over an input voltage range of 1 V to 5.5 V and switch currents of up to 3 A. An integrated charge pump biases the NMOS switch in order to achieve a low switch ON-Resistance. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals. The rise time of the TPS22963/64 device is internally controlled in order to avoid inrush current.
The TPS22963/64 provides reverse current protection. When the power switch is disabled, the device will not allow the flow of current towards the input side of the switch. The reverse current protection feature is active only when the device is disabled so as to allow for intentional reverse current (when the switch is enabled) for some applications.
The TPS22963/64 is available in a small, space-saving 6-pin WCSP package and is characterized for operation over the free air temperature range of –40°C to 85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS2296xC 5.5-V, 3-A, 13-mΩ On-Resistance Load Switch With Reverse Current Protection and Controlled Turn-On datasheet (Rev. A) | PDF | HTML | 2015. 1. 14 | |
| 기술 문서 | How innovative packaging can drive higher power density in load switches | PDF | HTML | 2022. 2. 23 | ||
| 애플리케이션 노트 | Load Switch Thermal Considerations (Rev. A) | 2018. 10. 11 | |||
| 애플리케이션 노트 | Basics of Load Switches (Rev. A) | 2018. 9. 5 | |||
| 애플리케이션 노트 | Selecting a Load Switch to Replace a Discrete Solution | 2017. 4. 30 | |||
| 애플리케이션 노트 | Timing of Load Switches | 2017. 4. 27 | |||
| 애플리케이션 노트 | Reverse Current Protection in Load Switches | 2016. 5. 19 | |||
| 애플리케이션 노트 | Managing Inrush Current (Rev. A) | 2015. 5. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS22964CEVM-029 — TPS22964C 부하 스위치 평가 모듈
The Texas Instruments TPS22964CEVM-029 evaluation module (EVM) helps designers evaluate the performance of the TPS22964C low on-resistance, 3-A load switch in the ultra-small CSP-6 package. The EVM allows the designer to apply an input voltage (1.1 V-5.5 V) under different loading conditions (0-3 (...)
TPS22964C Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-00399 — SSD 전력 공급 레퍼런스 디자인
The TIDA-00399 design implements a complete power delivery solution for an SSD in the M.2 form factor. The TPS22954 load switch is used to limit inrush current and eliminate the need for a separate supervisor circuit on the system input. This design is tested and includes GUI, demo, and User's (...)
TIDA-050043 — NXP i.MX 6ULL 프로세서용 통합 전원 공급 장치 레퍼런스 설계
이 레퍼런스 설계는 TPS6521815 PMIC의 NXP™ i.MX 6ULL 애플리케이션 프로세서에 전원을 공급하는 완전한 기능의 개발 보드입니다. 하드웨어 설계는 DDR3L SDRAM(512MB), 32MB 직렬 NOR 플래시, 8GB eMMC 5.0 iNAND, SD 카드 인터페이스 v3.0, 듀얼 채널 100Base-T 이더넷, Type-A 포트를 지원하는 5채널 USB 허브, 마이크로 AB USB OTG, 탑재 가능한 LCD 화면, 추가 입력 및 출력을 위한 확장 커넥터로 구성됩니다.
이 설계는 그리드 통신의 데이터 집신기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YZP) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.