전력 관리 부하 스위치

TPS22913

활성

출력 방전을 지원하는 5.5V, 2A, 60mΩ 부하 스위치

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS22991 활성 선택적 출력 방전 기능을 탑재한 5V, 3A, 25mΩ 부하 스위치 Higher max current (3A)

제품 상세 정보

Imax (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 1.4 Number of channels 1 Features Inrush current control, Quick output discharge, Reverse current blocking, Under voltage lock out Quiescent current (Iq) (typ) (µA) 2 Soft start Fixed Rise Time Rating Catalog Ron (typ) (mΩ) 61 Shutdown current (ISD) (typ) (µA) 1.2 Current limit type None Function Inrush current control, Reverse current blocking FET Internal Operating temperature range (°C) -40 to 85 Device type Load switches
Imax (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 1.4 Number of channels 1 Features Inrush current control, Quick output discharge, Reverse current blocking, Under voltage lock out Quiescent current (Iq) (typ) (µA) 2 Soft start Fixed Rise Time Rating Catalog Ron (typ) (mΩ) 61 Shutdown current (ISD) (typ) (µA) 1.2 Current limit type None Function Inrush current control, Reverse current blocking FET Internal Operating temperature range (°C) -40 to 85 Device type Load switches
DSBGA (YZV) 4 1.5625 mm² 1.25 x 1.25
  • Integrated Single Load Switch
  • Four Pin Wafer-Chip-Scale Package (Nom)
    • 0.9 mm × 0.9 mm, 0.5-mm Pitch, 0.5-mm Height (YZV)
  • Input Voltage Range: 1.4 V to 5.5 V
  • Low ON-Resistance
    • rON = 60 mΩ at VIN = 5 V
    • rON = 61 mΩ at VIN = 3.3 V
    • rON = 74 mΩ at VIN = 1.8 V
    • rON = 84 mΩ at VIN = 1.5 V
  • 2-A Maximum Continuous Switch Current
  • Low Threshold Control Input
  • Controlled Slew-rate
  • Under-Voltage Lock Out
  • Full-Time Reverse Current Protection
  • Quick Output Discharge Transistor (TPS22913B/C Devices)
  • Integrated Single Load Switch
  • Four Pin Wafer-Chip-Scale Package (Nom)
    • 0.9 mm × 0.9 mm, 0.5-mm Pitch, 0.5-mm Height (YZV)
  • Input Voltage Range: 1.4 V to 5.5 V
  • Low ON-Resistance
    • rON = 60 mΩ at VIN = 5 V
    • rON = 61 mΩ at VIN = 3.3 V
    • rON = 74 mΩ at VIN = 1.8 V
    • rON = 84 mΩ at VIN = 1.5 V
  • 2-A Maximum Continuous Switch Current
  • Low Threshold Control Input
  • Controlled Slew-rate
  • Under-Voltage Lock Out
  • Full-Time Reverse Current Protection
  • Quick Output Discharge Transistor (TPS22913B/C Devices)

The TPS22910A, TPS22912C, and TPS22913B/C are small, low rON load switches with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals.

The TPS22910A, TPS22912C, and TPS22913B/C devices provide reverse current protection in ON and OFF states. An internal reverse voltage comparator disables the power-switch when the output voltage (VOUT) is driven higher than the input voltage (VIN), by VRCP, to quickly (10 µs typ) stop the flow of current towards the input side of the switch. Reverse current protection is always active, even when the power-switch is disabled. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.

The TPS22913B/C contains a 150-Ω on-chip load resistor for quick output discharge when the switch is turned off.

This family of devices have various slew rate options to avoid inrush current (see for details), are available in an ultra-small, space-saving 4-pin WCSP packages, and are characterized for operation over the free-air temperature range of –40°C to 85°C.

The TPS22910A, TPS22912C, and TPS22913B/C are small, low rON load switches with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals.

The TPS22910A, TPS22912C, and TPS22913B/C devices provide reverse current protection in ON and OFF states. An internal reverse voltage comparator disables the power-switch when the output voltage (VOUT) is driven higher than the input voltage (VIN), by VRCP, to quickly (10 µs typ) stop the flow of current towards the input side of the switch. Reverse current protection is always active, even when the power-switch is disabled. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.

The TPS22913B/C contains a 150-Ω on-chip load resistor for quick output discharge when the switch is turned off.

This family of devices have various slew rate options to avoid inrush current (see for details), are available in an ultra-small, space-saving 4-pin WCSP packages, and are characterized for operation over the free-air temperature range of –40°C to 85°C.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS22915 활성 출력 방전을 지원하는 5.5V, 2A, 39mΩ 부하 스위치 This product is A small (0.8mm x 0.8mm), low Ron (37mohm), 2A load switch.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
10개 모두 보기
유형 직함 날짜
* Data sheet TPS2291xx Ultra-small, Low On Resistance Load Switch With Controlled Turn-on datasheet (Rev. F) PDF | HTML 2015/01/07
E-book 11 Ways to Protect Your Power Path 2019/07/03
Application note Load Switch Thermal Considerations (Rev. A) 2018/10/11
Application note Basics of Load Switches (Rev. A) 2018/09/05
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Selecting a Load Switch to Replace a Discrete Solution 2017/04/30
Application note Timing of Load Switches 2017/04/27
Application note Reverse Current Protection in Load Switches 2016/05/19
Application note Managing Inrush Current (Rev. A) 2015/05/28
EVM User's guide TPS22910-13 EVM User's Guide (Rev. A) 2012/01/09

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BOOST5545ULP — C5545 부스터 팩

C5545 부스터팩은 소형 폼 팩터를 지닌 저비용 고속 개발 플랫폼으로, C553x 및 C5545 DSP 제품군을 평가하는 데 필요한 모든 하드웨어와 소프트웨어가 포함되어 있습니다. C553x 및 C5545 ULP(초저전력) DSP는 업계 최저 수준의 비용과 전력 소비를 자랑하는 16비트 DSP입니다. 부스터팩은 I2S, SPI, USB2 등 다양한 인터페이스를 갖춘 100MHz C5545 ULP DSP를 탑재하고 있습니다. 손쉬운 연결을 위한 온보드 CC2650 BLE 라디오가 있으며, 간편한 확장을 위해 MSP432 (...)

사용 설명서: PDF
TI.com에서 구매 불가
개발 키트

EVMK2GX — 66AK2Gx 1GHz 평가 모듈

EVMK2GX("K2G"라고도 함) 1GHz EVM(평가 모듈)을 사용하면 개발자가 66AK2Gx 프로세서 제품군의 평가를 즉시 시작하고 오디오, 산업용 모터 제어, 스마트 그리드 보호 및 기타 고신뢰성, 실시간 컴퓨팅 집약적 애플리케이션의 개발을 가속화할 수 있습니다. 기존의 KeyStone 기반 SoC 장치와 마찬가지로 66AK2Gx는 DSP 및 Arm® 코어가 모두 시스템의 모든 메모리와 주변 장치를 마스터할 수 있습니다. 이 아키텍처는 DSP 중심 또는 Arm 중심의 시스템 설계를 달성할 수 있는 소프트웨어 유연성을 (...)

사용 설명서: PDF
TI.com에서 구매 불가
개발 키트

EVMK2GXS — 66AK2Gx(K2G) 1GHz 높은 보안 평가 모듈

개발자는 K2G 1GHz 높은 보안 평가 모듈(EVM)을 통해 높은 보안 개발 버전의 66AK2Gx 프로세서 프로그래밍을 평가 및 테스트하고 오디오 및 산업용 실시간 애플리케이션의 보안 부팅 제품 개발을 다음 단계를 가속화할 수 있습니다.  이 EVM은 Linux 및 TI-RTOS 운영 체제 모두의 프로세서 SDK에서 지원되며 EVMK2GX와 동일한 특징과 기능을 지원합니다.

참고:  이 EVM을 구매하고 소프트웨어에 액세스하려면 승인이 필요합니다. "지금 주문하기" 표의 요청 버튼을 사용하여 요청을 제출합니다.

사용 설명서: PDF
시뮬레이션 모델

TPS22913B Unencrytped PSpice Transient Model Package (Rev. A)

SLVMAH4A.ZIP (57 KB) - PSpice Model
시뮬레이션 모델

TPS22913C Unencrypted PSpice Transient Model Package (Rev. A)

SLVM940A.ZIP (50 KB) - PSpice Model
회로도

C5545 BoosterPack Schematic

SPRR233.PDF (1366 KB)
레퍼런스 디자인

TIDEP0081 — ADC32RF80에 66AK2L06 JESD204B 연결을 사용하여 광대역 리시버 설계 레퍼런스 디자인

현재 고속 데이터 컨버터를 베이스밴드 프로세서에 연결하기 위해 FPGA 또는 ASIC를 사용하는 광대역 리시버 시스템 개발자는 성능 향상과 비용, 전력, 크기의 대폭적인 감소를 통해 시장 출시 시간을 단축해야 합니다. 이 레퍼런스 설계에는 JESD204B 인터페이스 및 디지털 프론트 엔드 프로세싱(DFE)을 통합한 업계 최초의 광범위한 프로세서가 포함되어 있습니다. ADC32RF80DAC38J84에 연결하면 항공 및 방위, 테스트 및 측정, 산업용 애플리케이션을 위한 효율적인 솔루션을 제공합니다.
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YZV) 4 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상