TPS22810
- Integrated Single Channel Load Switch
- Ambient Operating Temperature:
–40°C to +105°C- SOT23-6 (DBV): 2-A Maximum Continuous Current 1
- WSON (DRV): 3-A Maximum Continuous Current 1
- Input Voltage Range: 2.7 V to 18 V
- Absolute Maximum Input Voltage: 20 V
- On-Resistance (RON)
- RON = 79 mΩ (typical) at VIN = 12 V
- Quiescent Current
- 62 µA (typical) at VIN = 12 V
- Shutdown Current
- 500 nA (typical) at VIN = 12 V
- Thermal Shutdown
- Undervoltage Lock-Out (UVLO)
- Adjustable Quick Output Discharge (QOD)
- Configurable Rise Time With CT Pin
- SOT23-6 Package
- 2.9-mm × 2.8-mm, 0.95-mm Pitch
1.45-mm Height (DBV)
- 2.9-mm × 2.8-mm, 0.95-mm Pitch
- WSON Package
- 2-mm × 2-mm, 0.65-mm Pitch
0.75-mm Height (DRV)
- 2-mm × 2-mm, 0.65-mm Pitch
- ESD Performance Tested per JESD 22
- ±2-kV HBM and ±1-kV CDM
(1)Thermal performance must be considered
The TPS22810 is a single channel load switch with configurable rise time and with an integrated quick output discharge (QOD). In addition, the device features thermal shutdown to protect the device against high junction temperature. Because of this, safe operating area of the device is inherently ensured. The device contains an N-channel MOSFET that can operate over an input voltage range of 2.7 V to 18 V. SOT23-5 (DBV) package can support a maximum current of 2 A. WSON (DRV) package can support a maximum current of 3 A. The switch is controlled by an on and off input, which is capable of interfacing directly with low-voltage control signals.
The configurable rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating power supply droop. Undervoltage lock-out is used to turn off the device if the VIN voltage drops below a threshold value, ensuring that the downstream circuitry is not damaged by being supplied by a voltage lower than intended. The configurable QOD pin controls the fall time of the device to allow design flexibility for power down.
The TPS22810 is available in a leaded, SOT-23 package (DBV) which allows to visually inspect solder joints, as well as a WSON package (DRV). The device is characterized for operation over the free-air temperature range of –40˚C to +105˚C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS22810, 2.7-18-V, 79-mΩ On-Resistance Load Switch With Thermal Protection datasheet (Rev. C) | PDF | HTML | 2018. 1. 17 | |
| e북 | 11 Ways to Protect Your Power Path | 2019. 7. 3 | |||
| 애플리케이션 노트 | Basics of Power Switches (Rev. A) | PDF | HTML | 2019. 4. 26 | ||
| 애플리케이션 노트 | Load Switch Thermal Considerations (Rev. A) | 2018. 10. 11 | |||
| 애플리케이션 노트 | Basics of Load Switches (Rev. A) | 2018. 9. 5 | |||
| 애플리케이션 노트 | Selecting a Load Switch to Replace a Discrete Solution | 2017. 4. 30 | |||
| 애플리케이션 노트 | Timing of Load Switches | 2017. 4. 27 | |||
| 애플리케이션 노트 | Fundamentals of On-Resistance in Load Switches | 2016. 6. 9 | |||
| 애플리케이션 노트 | Managing Inrush Current (Rev. A) | 2015. 5. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BP-AM2BLDCSERVO — AM2x Brushless-DC (BLDC) Servo Motor BoosterPack
The AM2x BLDC Servo Motor BoosterPack plug-in module is an add-on for the AM2x LaunchPad development kits. This BoosterPack provides up to two axes of 24V/8A BLDC driver, ADC/SDFM current feedback, industrial absolute encoder, and resolver feedback.
TPS22810EVM — TPS22810 상승 시간을 조정할 수 있는 18V, 2A, 79mΩ 부하 스위치 평가 모듈
TPS22810 평가 모듈(EVM)은 TPS22810 부하 스위치 평가 용도로 완조립 및 테스트를 거친 회로입니다. TPS22810EVM을 사용하면 다양한 부하 조건(0A~2 A)에서 TPS22810에 여러 다른 입력 전압(2.7V~18V)을 인가할 수 있습니다. 테스트 지점 연결을 통해 EVM 사용자는 사용자 정의 테스트 조건을 사용하여 장치를 제어하고 정확한 RON 측정 결과를 얻을 수 있습니다.
TPS22810 and TPS22810-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-010008 — 그리드 애플리케이션의 과도 차단 기능을 위한 평면 클램프 TV 기반 레퍼런스 설계
TIDA-010271 — 에너지 저장 시스템을 위한 적층형 배터리 관리 장치 레퍼런스 디자인
TIDA-01081 — 머신 러닝을 위한 LED 조명 제어 레퍼런스 설계
TIDA-01401 — 절대 인코더용 높은 EMC 내성 RS-485 인터페이스 레퍼런스 설계
TIDA-01584 — 부하 스위치를 사용한 전원 시퀀싱 레퍼런스 설계
TIDA-01584 레퍼런스 설계는 부하 스위치를 사용한 다양한 전원 시퀀싱 구성을 보여줍니다. 통합된 부하 스위치를 사용하여 각 전압 레일의 타이밍을 독립적으로 조정할 수 있습니다. 광범위한 프로세서 개입이나 외부 디지털 부품 없이도 각 전압 레일을 제어할 수 있습니다. 이 설계는 다양한 하위시스템과 프로세서 레일을 켜기 위해 특정 타이밍 시퀀스가 필요한 다기능 프린터(MFP) 및 셋톱박스(STB)와 같은 애플리케이션에 유용합니다.
TIDA-01630 — Tamagawa 인코더용 높은 EMC 내성 RS485 인터페이스 레퍼런스 설계
TIDA-050027 — 유연한 분할로 절전 효과를 극대화할 수 있는 다중 레일 TV 전원 공급 장치 레퍼런스 설계
TIDA-050027 레퍼런스 설계는 텔레비전(TV) 플랫폼을 위한 전력 분배 솔루션입니다. 일반적인 전압 레일과 주변 기기를 에뮬레이션하는 구성을 제공하여 LCD 및 OLED TV를 포함한 여러 TV 전원 아키텍처에서 레퍼런스 설계로 사용할 수 있습니다. 입력부에서 eFuse는 단락 보호에 사용되며, 고효율 벅 컨버터는 코어 레일, 상시 동작 레일 및 주변 기기 레일에 필요한 전원을 제공합니다. 또한 특정 주변 기기를 위해 낮은 IQ 저손실 레귤레이터(LDO)가 클린 디지털 전원 레일을 제공합니다. 이러한 전원 구성 요소 외에도 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DRV) | 6 | Ultra Librarian |
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.