전력 관리 부하 스위치

TPS2065D

활성

1A 부하, 4.5-5.5V, 96mΩ USB 전원 스위치, 액티브 하이, 출력 방전, 역방향 차단

제품 상세 정보

Product type Fixed current limit, Power switch Vin (max) (V) 5.5 Vin (min) (V) 4.5 Rating Catalog Number of channels 1 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 0.16 Enable Active High
Product type Fixed current limit, Power switch Vin (max) (V) 5.5 Vin (min) (V) 4.5 Rating Catalog Number of channels 1 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 0.16 Enable Active High
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm)
  • Single Power Switch Family
  • Rated currents of 1 A
  • ±20% Accurate, Fixed, Constant Current Limit
  • Fast Overcurrent Response: 2 µs
  • Deglitched Fault Reporting
  • Output Discharge
  • Reverse Current Blocking
  • Built-in Soft Start
  • Ambient Temperature Range: –40°C to 85°C
  • UL Listed and CB-File No. E169910
  • Single Power Switch Family
  • Rated currents of 1 A
  • ±20% Accurate, Fixed, Constant Current Limit
  • Fast Overcurrent Response: 2 µs
  • Deglitched Fault Reporting
  • Output Discharge
  • Reverse Current Blocking
  • Built-in Soft Start
  • Ambient Temperature Range: –40°C to 85°C
  • UL Listed and CB-File No. E169910

The TPS2065D power-distribution switch family is intended for applications such as USB where heavy capacitive loads and short circuits are likely to be encountered. The device can continuously deliver up to 1 A output current.

The TPS2065D limits the output current to a safe level by operating in a constant-current mode when the output load exceeds the current limit threshold. This provides a predictable fault current under all conditions. The fast overload response time eases the burden on the main 5-V supply to provide regulated power when the output is shorted. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.

The TPS2065D power-distribution switch family is intended for applications such as USB where heavy capacitive loads and short circuits are likely to be encountered. The device can continuously deliver up to 1 A output current.

The TPS2065D limits the output current to a safe level by operating in a constant-current mode when the output load exceeds the current limit threshold. This provides a predictable fault current under all conditions. The fast overload response time eases the burden on the main 5-V supply to provide regulated power when the output is shorted. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
TPS2065 활성 1A 부하, 2.7-5.5V, 70mΩ USB 전원 스위치, 액티브 하이 This product offers wider input voltage range and lower 1 ku price

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
4개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS2065D Current Limited, Power-Distribution Switches datasheet PDF | HTML 2016. 12. 2
인증서 UL 2367 Certificate of Compliance 20170810-E169910 2024. 6. 19
인증서 TPS2065D UL Certificate of Compliance IEC 62368-1 2020. 9. 7
애플리케이션 노트 Power Switch Fault Glitch Solution During Power Up (Rev. A) PDF | HTML 2020. 4. 9

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS2065CDBVEVM-636 — TPS2065C 단일 채널, 전류 제한 USB 전력 분배 스위치용 평가 모듈

The TPS2065CDBVEVM-636 (EVM) provides an evaluation platform for the TPS20XXCDBV series of Single Channel, Current-Limited USB Power Distribution Switches. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device features.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
레퍼런스 디자인

TIDA-01451 — 셋톱 박스로 전원 스위칭 레퍼런스 디자인

TIDA-01451 레퍼런스 설계의 기능은 셋톱 박스의 전력 분배를 에뮬레이션합니다. 통합 부하 스위치를 사용하여 전원 레일을 제어하면 사용자의 요구와 필요에 따라 각 레일을 켜거나 끌 수 있습니다. 사용하지 않는 레일을 끄면 전력 손실을 줄이고 Energy Star와 같은 에너지 준수 표준을 쉽게 충족할 수 있습니다. 입력에 배치된 eFuse는 핫 플러그 과도 상태를 관리하고 너무 높거나 낮은 입력 전압으로부터 다운스트림 DC/DC 컨버터를 보호하여 완제품의 반품률을 줄일 수 있습니다.

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDEP-0075 — 산업용 통신 게이트웨이 PROFINET IRT - PROFIBUS 마스터 레퍼런스 디자인

PROFINET은 고속, 결정적 통신 및 엔터프라이즈 연결로 인해 자동화 분야에서 업계 최고의 산업용 이더넷 프로토콜이 되고 있습니다. 그러나 세계에서 가장 인기있는 필드버스인 PROFIBUS 역시 그 중요성과 사용량이 높고, 기존의 투자 보호를 위해 수년간 계속 사용될 것입니다. 공정 플랜트의 하이브리드 특성을 반영한 이 레퍼런스 설계는 기존 필드버스 기술을 Sitara™ AM57x 프로세서의 PRU-ICSS(프로그래머블 실시간 유닛 및 산업용 통신 서브시스템)을 기반으로 하는 실시간 이더넷 네트워크로 마이그레이션하는 데 (...)
지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDEP0078 — AM572x용 OPC UA 데이터 액세스 서버 레퍼런스 디자인

OPC UA는 Industry 4.0 기반으로 연결된 모든 기계 간의 상호운용 및 통신을 지원하기 위해 설계된 산업용의 기계 간 프로토콜입니다. 이 레퍼런스 설계는 프로젝트 또는 설계 내에 임베디드되어 실행되는 OPC UA DA(데이터 액세스) 서버를 사용하여 통신하도록 하는 Matrikon OPC™ OPC UA SDK(서버 개발 키트)를 보여줍니다. OPC UA DA는 실시간 데이터를 처리하고 시간이 데이터의 중요한 측면인 산업용 자동화 애플리케이션에 가장 적합합니다. AM572x IDK의 GPIO 기능에 액세스하는 OPC (...)
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23 (DBV) 5 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상