전력 관리 USB 전원 스위치 및 충전 포트 컨트롤러

TPS2051B

활성

0.5A 부하, 2.7-5.5V, 70mΩ USB 전원 스위치, 액티브 하이

제품 상세 정보

Product type Fixed current limit, Power switch Rating Catalog Continuous current (max) (A) 0.5 Current limit (A) 1 Number of switches 1 Enable Active High Vin (max) (V) 5.5 Vin (min) (V) 2.7 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 0.25
Product type Fixed current limit, Power switch Rating Catalog Continuous current (max) (A) 0.5 Current limit (A) 1 Number of switches 1 Enable Active High Vin (max) (V) 5.5 Vin (min) (V) 2.7 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 0.25
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9 SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • 70mΩ High-Side MOSFET
  • 500mA Continuous Current
  • Thermal and Short-Circuit Protection
  • Accurate Current Limit (0.75A Minimum, 1.25A Maximum)
  • Operating Range: 2.7V to 5.5V
  • 0.6ms Typical Rise Time
  • Undervoltage Lockout
  • Deglitched Fault Report ( OC)
  • No OC Glitch During Power Up
  • Maximum Standby Supply Current: 1µA (Single, Dual) or 2µA (Triple, Quad)
  • Ambient Temperature Range: –40°C to 85°C
  • UL Recognized, File Number E169910
  • Additional UL Recognition for TPS2042B and TPS2052B for Ganged Configuration
  • 70mΩ High-Side MOSFET
  • 500mA Continuous Current
  • Thermal and Short-Circuit Protection
  • Accurate Current Limit (0.75A Minimum, 1.25A Maximum)
  • Operating Range: 2.7V to 5.5V
  • 0.6ms Typical Rise Time
  • Undervoltage Lockout
  • Deglitched Fault Report ( OC)
  • No OC Glitch During Power Up
  • Maximum Standby Supply Current: 1µA (Single, Dual) or 2µA (Triple, Quad)
  • Ambient Temperature Range: –40°C to 85°C
  • UL Recognized, File Number E169910
  • Additional UL Recognition for TPS2042B and TPS2052B for Ganged Configuration

The TPS20xxB power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.

When the output load exceeds the current-limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent ( OCx) logic output low. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains off until valid input voltage is present. This power-distribution switch is designed to set current limit at 1A (typical).

The TPS20xxB power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.

When the output load exceeds the current-limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent ( OCx) logic output low. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains off until valid input voltage is present. This power-distribution switch is designed to set current limit at 1A (typical).

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
4개 모두 보기
유형 직함 날짜
* Data sheet TPS20xxB Current-Limited, Power-Distribution Switches datasheet (Rev. P) PDF | HTML 2024/08/03
Certificate US-36986-UL Certificate of Compliance IEC 62368-1 2021/03/12
EVM User's guide TPS2041B/51B EVM Power-Distribution Switch (Rev. A) 2007/06/01
User guide HPA228A/HPA240A Power-Distribution Switch 2007/03/22

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

HSEC180ADAPEVM-AM2 — AM261x SOM(시스템 온 모듈) 평가 모듈(EVM)용 HSEC180 어댑터 보드

이 평가 모듈(EVM)은 TI AM261x SOM(시스템 온 모듈) 플랫폼용 180핀 HSEC(고속 에지 카드) 어댑터로, SOM 기반 플랫폼이 Sitara™/C2000™ HSEC 기반 EVM과 역호환성을 가질 수 있도록 합니다. HSEC180ADAPEVM-AM2은 TMDSHSECDOCK-AM263 및 TMDSHSECDOCK 같은 레거시 Sitara/C2000 HSEC 도킹 스테이션과 함께 사용할 수 있도록 SOM 보드의 180핀을 HSEC 핀에 연결합니다.

사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

TPS2051BEVM — TPS2051B 평가 모듈

TheTPS2051BEVM provides a means for the user to evaluate quickly the functionality and electrical performance of the TPS2051B. All inputs and outputs are brought out to test points for control and monitoring. Allpassive components are included on the EVM for device operation. The input pin should (...)

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

BEAGLE-3P-BBONE-AI — 임베디드 인공 지능을 위한 BeagleBone® AI AM5729 개발 보드

What is BeagleBone® AI?

Built on the proven BeagleBoard.org® open source Linux approach, BeagleBone® AI fills the gap between small SBCs and more powerful industrial computers. Based on the Texas Instruments, Sitara™ AM5729 processor, developers have access to a highly integrated and (...)

사용 설명서: PDF
도터 카드

TMDSCNCD28379D — C2000™ Delfino MCU controlCARD™용 F28379D 개발 키트

TMDSCNCD28379D는 TI MCU의 F2837xD, F2837xS 및 F2807x 시리즈를 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. controlCARD는 초기 평가 및 시스템 프로토타이핑에 이상적입니다. controlCARD는 두 가지 표준 폼 팩터(100핀 DIMM 또는 180핀 HSEC) 중 하나를 활용하여 프로파일이 낮은 단일 보드 컨트롤러 솔루션을 제공하는 완전한 보드 수준 모듈입니다. 첫 번째 평가의 경우 controlCARD는 일반적으로 베이스보드와 함께 번들로 구매하거나 (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
개발 키트

EVMK2GX — 66AK2Gx 1GHz 평가 모듈

EVMK2GX("K2G"라고도 함) 1GHz EVM(평가 모듈)을 사용하면 개발자가 66AK2Gx 프로세서 제품군의 평가를 즉시 시작하고 오디오, 산업용 모터 제어, 스마트 그리드 보호 및 기타 고신뢰성, 실시간 컴퓨팅 집약적 애플리케이션의 개발을 가속화할 수 있습니다. 기존의 KeyStone 기반 SoC 장치와 마찬가지로 66AK2Gx는 DSP 및 Arm® 코어가 모두 시스템의 모든 메모리와 주변 장치를 마스터할 수 있습니다. 이 아키텍처는 DSP 중심 또는 Arm 중심의 시스템 설계를 달성할 수 있는 소프트웨어 유연성을 (...)

사용 설명서: PDF
TI.com에서 구매 불가
개발 키트

EVMK2GXS — 66AK2Gx(K2G) 1GHz 높은 보안 평가 모듈

개발자는 K2G 1GHz 높은 보안 평가 모듈(EVM)을 통해 높은 보안 개발 버전의 66AK2Gx 프로세서 프로그래밍을 평가 및 테스트하고 오디오 및 산업용 실시간 애플리케이션의 보안 부팅 제품 개발을 다음 단계를 가속화할 수 있습니다.  이 EVM은 Linux 및 TI-RTOS 운영 체제 모두의 프로세서 SDK에서 지원되며 EVMK2GX와 동일한 특징과 기능을 지원합니다.

참고:  이 EVM을 구매하고 소프트웨어에 액세스하려면 승인이 필요합니다. "지금 주문하기" 표의 요청 버튼을 사용하여 요청을 제출합니다.

사용 설명서: PDF
개발 키트

TMDSDOCK28379D — F28379D Delfino 실험 키트

TMDSDOCK28379D는 C2000™ Delfino™ F2837x 및 Piccolo F2807x 마이크로컨트롤러 제품 시리즈를 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. 도킹 스테이션은 controlCARD에 전원을 공급하며 프로토타이핑을 위한 브레드보드 영역이 있습니다. 일련의 헤더 핀을 사용하여 주요 장치 신호에 액세스할 수 있습니다.

사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS2051B TINA-TI Transient Reference Design

SLVM517.TSC (649 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS2051B TINA-TI Transient Spice Model

SLVM518.ZIP (36 KB) - TINA-TI Spice Model
시뮬레이션 모델

TPS2051B Unencrypted PSpice Transient Model Package (Rev. A)

SLVM382A.ZIP (31 KB) - PSpice Model
레퍼런스 디자인

TIDM-SERVODRIVE — 산업용 서보 드라이브 및 AC 인버터 드라이브 레퍼런스 디자인

The DesignDRIVE Development Kit is a reference design for a complete industrial drive directly connecting to a three phase ACI or PMSM motor. Many drive topologies can be created from the combined control, power and communications technologies included on this single platform.  Includes (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01568 — 애플리케이션 프로세서를 위한 12mm x 12mm, 5레일 전원 시퀀싱 레퍼런스 설계

이 레퍼런스 설계는 애플리케이션 프로세서 또는 고성능 제어 플랫폼을 위한 검증되고 비용 경쟁력이 있는 전원 시퀀싱 솔루션을 보여줍니다. 이 설계는 12mm × 12mm의 레이아웃 공간에 최적화된 5개의 서로 다른 전압 레일을 지원합니다. 또한 지연 시간을 조정하고 각 레일의 특정 전압 레벨을 재구성하여 다양한 입력 커패시터 및 다양한 프로세서의 요구 사항에 맞게 설계할 수 있습니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010032 — 이더넷, 6LoWPAN RF 메시 등을 지원하는 범용 데이터 집신기 레퍼런스 설계

IPv6 기반 그리드 통신은 스마트 계량기 및 그리드 자동화와 같은 산업용 시장 및 애플리케이션에서 표준으로 사용되고 있습니다. 범용 데이터 집신기 설계는 이더넷 백본 통신, 6LoWPAN RF 메시 네트워킹, RS-485 등과 통합된 완전한 IPv6 기반 네트워크 솔루션을 제공합니다. 6LoWPAN 메시 네트워킹은 표준 기반 상호 운용성, 신뢰성, 보안 및 장거리 연결과 같은 주요 문제를 해결합니다. 이 설계를 통해 이더넷 백본 통신을 통해 액세스할 수 있는 웹 서버를 통해 최종 장치를 원격으로 제어 및 모니터링할 수 있습니다. (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDEP-0075 — 산업용 통신 게이트웨이 PROFINET IRT - PROFIBUS 마스터 레퍼런스 디자인

PROFINET은 고속, 결정적 통신 및 엔터프라이즈 연결로 인해 자동화 분야에서 업계 최고의 산업용 이더넷 프로토콜이 되고 있습니다. 그러나 세계에서 가장 인기있는 필드버스인 PROFIBUS 역시 그 중요성과 사용량이 높고, 기존의 투자 보호를 위해 수년간 계속 사용될 것입니다. 공정 플랜트의 하이브리드 특성을 반영한 이 레퍼런스 설계는 기존 필드버스 기술을 Sitara™ AM57x 프로세서의 PRU-ICSS(프로그래머블 실시간 유닛 및 산업용 통신 서브시스템)을 기반으로 하는 실시간 이더넷 네트워크로 마이그레이션하는 데 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDEP0078 — AM572x용 OPC UA 데이터 액세스 서버 레퍼런스 디자인

OPC UA는 Industry 4.0 기반으로 연결된 모든 기계 간의 상호운용 및 통신을 지원하기 위해 설계된 산업용의 기계 간 프로토콜입니다. 이 레퍼런스 설계는 프로젝트 또는 설계 내에 임베디드되어 실행되는 OPC UA DA(데이터 액세스) 서버를 사용하여 통신하도록 하는 Matrikon OPC™ OPC UA SDK(서버 개발 키트)를 보여줍니다. OPC UA DA는 실시간 데이터를 처리하고 시간이 데이터의 중요한 측면인 산업용 자동화 애플리케이션에 가장 적합합니다. AM572x IDK의 GPIO 기능에 액세스하는 OPC (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010008 — 그리드 애플리케이션의 과도 차단 기능을 위한 평면 클램프 TV 기반 레퍼런스 설계

이 레퍼런스 설계는 플랫 클램프 서지 보호, ESD 장치, eFuse 또는 부하 스위치를 사용하여 과전압, 과부하 및 과도 전류(1.2/50µs, 42Ω)로부터 여러 그리드 애플리케이션에서 사용되는 AC 또는 DC 아날로그 입력, DC 아날로그 출력, AC 또는 DC 이진 입력, 고압측 또는 저압측 드라이버가 있는 디지털 출력, LCD 바이어스 공급, USB 인터페이스(전원 및 데이터) 및 24, 12 또는 5V 입력 온보드 전원 공급 장치를 보호하기 위한 다양한 접근 방법을 제공합니다. 이 설계는 진단을 위해 온도, 습도, (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDM-TM4C129XSDRAM — 고성능 마이크로컨트롤러의 SDRAM 메모리 인터페이싱

This reference design demonstrates how to implement and interface SDRAM Memory to the performance microcontroller TM4C129XNCZAD. The implementation is made possible by using the EPI Interface of the Microcontroller to interface a 256Mbit SDRAM at 60MHz which allows developers to implement (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDEP0013 — 임베디드 USB 2.0 레퍼런스 디자인

The USB 2.0 reference design guidelines are extremely important for designers considering USB2.0 electrical compliance testing. The guidelines are applicable to AM335x and AM437x but also generic to other processors. The approach taken for these guidelines is highly practical, without complex (...)
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
HVSSOP (DGN) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
SOT-23 (DBV) 5 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상