TPS1211-Q1
- AEC-Q100 qualified with the following results
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Functional Safety-Capable
- 3.5V to 40V input range (45V absolute maximum)
- Output reverse polarity protection down to –30V
- Integrated 12V charge pump with 100µA capacity
- Low 0.9µA shutdown current (EN/UVLO = Low)
- Strong pullup (3.7A) and pulldown (4A) gate driver
- Drives external back-to-back N-channel MOSFETs
- Variant with integrated pre-charge switch driver (TPS12111-Q1) to drive capacitive loads
- Two-level adjustable overcurrent protection (IWRN, ISCP) with adjustable response time (TMR) and fault flag output (FLT_I)
- Fast short-circuit protection: 1.2µs (TPS12111-Q1, TPS12112-Q1), 4µs (TPS12110-Q1)
- Accurate analog current monitor output (IMON): ±2% at 30mV (VSNS)
- Accurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%
- Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)
- Pin-to-pin compatible with TPS4811-Q1
The TPS1211-Q1 family is a 45V, smart high-side driver with protection and diagnostics. With wide operating voltage range of 3.5V–40V, the device is suitable for 12V system designs.
The device has a strong 3.7A peak source (PU) and 4A peak sink (PD) gate driver that enables power switching using parallel FETs in high-current system designs. Use INP as the gate driver control input.
The device has accurate current sensing (±2% at 30mV) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output.
The TPS12111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode (EN/UVLO < 0.3V), the controller draws a total shutdown current of 0.9µA (typical).
The TPS1211-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS1211-Q1 45V Automotive Smart High-Side Driver With Protection and Diagnostics datasheet (Rev. E) | PDF | HTML | 2025. 4. 8 | |
| 애플리케이션 노트 | Basics of High-Side Switches and Controllers | PDF | HTML | 2026. 3. 31 | ||
| 기능 안전 정보 | TPS1211x Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) | PDF | HTML | 2026. 1. 29 | ||
| 애플리케이션 노트 | Achieving Reverse Battery Protection Using TI High Side Switch Controllers (Rev. A) | PDF | HTML | 2024. 11. 21 | ||
| 아날로그 디자인 학술지 | 오토모티브 영역 기반 전력 분배 시스템의 오프보드 정전식 부하에 전원 공급 | PDF | HTML | Download English Version | 2024. 9. 16 | |
| 인증서 | TPS1211Q1EVM EU RoHS Declaration of Conformity (DoC) | 2022. 11. 4 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS1211Q1EVM — 스마트 고압측 드라이버용 TPS1211-Q1 평가 모듈
TPS1211Q1EVM은 TI TPS12110-Q1 컨트롤러의 참조 회로 평가에 사용할 수 있습니다. TPS12110-Q1은 3.5V~40V 스마트 고압측 컨트롤러로, 조정식 회로 차단기 타이머를 이용한 2단계 조정식 과전류 보호 기능, 과전압 보호, 빠른 단락 보호, 정확한 아날로그 전류 모니터 출력 및 원격 과열 보호 기능을 갖추고 있습니다.
TPS48110Q1EVM — 스마트 고압측 드라이버용 TPS48110-Q1 평가 모듈
TPS48110Q1EVM은 TI TPS48101-Q1 컨트롤러의 참조 회로 평가에 사용할 수 있습니다. TPS48110-Q1은 3.5V~80V 스마트 고압측 컨트롤러로, 조정식 회로 차단기 타이머를 이용한 2단계 조정식 과전류 보호 기능, 과전압 보호, 빠른 단락 보호, 정확한 아날로그 전류 모니터 출력 및 원격 과열 보호 기능을 갖추고 있습니다.
FET-INRUSH-SOA-CALC — FET SOA margin calculator for dvdt based startup
TPS1211-Q1-CALC — TPS1211-Q1 design calculator
TIDA-020094 — 48V 영역 레퍼런스 설계
이 레퍼런스 설계에서는 고급 차량용 48V 저전압 레일 아키텍처의 동향을 보여줍니다. 이 설계에는 48V 백본 아키텍처 및 48V-12V 전력 변환 기능이 포함되어 있습니다. 이 레퍼런스 설계에서는 주요 제품에서 사용할 수 있는 48V 부하 드라이버를 보여줍니다. 이러한 제품으로는 HSS(고압측 스위치) 및 HSSC(고압측 스위치 컨트롤러), 스마트 eFuse 및 MD(모터 드라이버)가 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGX) | 19 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.