TPD2S017
- Ultra-low clamping voltage ensures the protection of ultra-low voltage core chipset during ESD events
- IEC 61000-4-2 ESD protection
- Matching of series resistor (R = 1 Ω) of ±8 mΩ (typical)
- Differential channel input capacitance matching of 0.02 pF (typical)
- High-speed data rate and EMI filter action at high frequencies (–3 dB bandwidth, ≉3 GHz)
- Available in 6-Pin small-outline transistor [SOT-23 (DBV)] package
- Easy straight-through routing packages
The TPD2S017 is a two channel electrostatic discharge (ESD) protection device. This protection product offers two-stage ESD transient voltage suppression (TVS) diodes in each line with a typically 1-Ω series resistor isolation. This architecture allows the device to clamp at a very low voltage during system level ESD strikes.
The TPD2S017 conforms to the IEC61000-4-2 ESD protection standard. Due to the series resistor component, the TPD2S017 provides a controlled filter roll-off for even greater spurious EMI suppression and signal integrity. The monolithic silicon technology allows good matching of the component values, including the clamp capacitances and the series resistors between the differential signal pairs. The tight matching of the line capacitance and series resistors ensures that the differential signal distortion due to added ESD clamp remains minimal, and it also allows the part to operate at high-speed differential data rate (in excess of 1.5 Gbps). The DBV package offers a flow-through pin mapping for ease of board layout.
Typical applications of this ESD protection device are circuit protection for USB data lines, IEEE 1394 Interfaces, LVDS, MDDI/MIPI and HS signals.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPD2S017 2-Channel Ultra-Low Clamp Voltage ESD Solution With Series-Resistor Isolation datasheet (Rev. C) | PDF | HTML | 2023. 1. 3 | |
| 애플리케이션 노트 | ESD and Surge Protection for USB Interfaces (Rev. B) | PDF | HTML | 2024. 1. 11 | ||
| 사용 설명서 | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023. 9. 19 | ||
| 애플리케이션 노트 | ESD Packaging and Layout Guide (Rev. B) | PDF | HTML | 2022. 8. 18 | ||
| 애플리케이션 노트 | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022. 4. 7 | ||
| 사용 설명서 | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021. 9. 27 | ||
| 백서 | Designing USB for short-to-battery tolerance in automotive environments | 2016. 2. 10 | |||
| 아날로그 디자인 학술지 | Design Considerations for System-Level ESD Circuit Protection | 2012. 9. 25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ESDEVM — 0402, 0201 등을 포함한 ESD 다이오드 패키지용 범용 평가 모듈
TIDA-00079 — 클래스 1 PoE - 고효율 IP 카메라 전원 모듈 레퍼런스 디자인
This IP Camera power module is a highly efficient power solution that enables high performance 1080p operation at the Class 1 PoE power level. This innovative power module, used in the low power DM385-AR331 IP Camera, relies on highly efficient switchers like the TPS5432 that are also very cost (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.