TPA6404-Q1
- Advanced load diagnostics
- AC diagnostic for tweeter detection with impedance and phase response
- Integrated sine wave generator
- Easy to meet CISPR25-L5 EMC specification
- AEC-Q100 Qualified for automotive applications:
- Temperature Grade 1: –40°C to 125°C TA
- Device HBM ESD classification level: 3A
- Device CDM ESD classification level: C4B
- Audio Inputs
- 4 Channel differential analog input
- Four I2C-controlled gain options
- High input impedance for low value AC-coupling capacitor
- Audio outputs
- Four-channel Bridge-tied load (BTL), with option of parallel BTL (PBTL)
- Up to 2.1 MHz Output switching frequency
- 27 W, 10% THD into 4Ω at 14.4V
- 45W, 10% THD into 2Ω at 14.4V
- 85W, 10% THD into 1Ω at 14.4V PBTL
- Audio performance into 4Ω at 14.4V, 1kHz
- THD+N < 0.01%
- 42µVRMS Output noise
- - 90dB Crosstalk
- Load Diagnostics
- Output open and shorted load
- Output-to-battery or ground shorts
- Line output detection up to 6kΩ
- Runs without input clocks
- Protection
- Output current limiting
- Output short protection
- 40V Load dump
- Fortuitous Open ground and power tolerant
- DC Offset
- Over temperature
- Undervoltage and overvoltage
- General operation
- 4.5V to 18V supply voltage
- I2C Control With 4 Address Options
- Clip Detection and Thermal Foldback
The TPA6404-Q1 device is a four-channel analog-input Class-D audio amplifier that implements a 2.1MHz PWM switching frequency that enables a cost optimized solution in a very small 4.5cm2 PCB size, full operation down to 4.5V for start/stop events, and exceptional sound quality with up to 100kHz audio bandwidth.
The TPA6404-Q1 Class-D audio amplifier has an optimal design for use in entry level automotive head units that provide analog audio input signals as part of their system design.
The Class-D topology dramatically improves efficiency over traditional linear amplifier solutions.
The output switching frequency operates above the AM band, which eliminates the AM band interference and reduces the output filter size and cost.
The device is offered in a 56 pin HSSOP package with the exposed thermal pad up.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPA6404-Q1 45W, 2MHz Analog Input 4 -Channel Automotive Class-D Audio Amplifier with Load Dump Protection and I2 C Diagnostics datasheet (Rev. B) | PDF | HTML | 2025. 1. 15 | |
| Application brief | Diagnostics and Protections in Automotive Audio Systems (Rev. A) | 2019. 9. 24 | |||
| 애플리케이션 노트 | Inductor Selection Guide for 2.1 MHz Class-D Amplifiers (Rev. A) | PDF | HTML | 2019. 9. 5 | ||
| 기술 문서 | Why you should use a Class-D audio amplifier in your automotive infotainment syste | PDF | HTML | 2018. 1. 8 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPA6404Q1EVM — TPA6404-Q1 50-W, 2MHz 아날로그 입력 4채널 오토모티브 클래스 D 오디오 증폭기 평가 모듈
TPA6404Q1EVM 평가 모듈(EVM)은 텍사스 인스트루먼트의 TPA6404-Q1 통합 회로를 보여줍니다. TPA6404-Q1 장치는 4채널 아날로그 입력 클래스 D 오디오 증폭기로, 매우 작은 PCB 크기로 비용 최적화된 솔루션을 구현하고 시작/정지 이벤트 시 4.5V까지 완전하게 작동하며 최대 40kHz 오디오 대역폭으로 탁월한 음질을 지원하는 2.1MHz PWM 스위칭 주파수를 구현합니다.
이 TPA6404Q1EVM은 4개의 BTL 출력 채널, 4개의 차동 입력, GUI 기반 평가 및 진단을 위한 온보드 USB-I2C (...)
PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development
PurePath™ 콘솔은 오디오 제품의 개발과 관련된 평가, 구성 및 디버그 프로세스를 간소화할 수 있도록 특별히 설계된, 고집적의 사용이 편리한 오디오 개발 제품군입니다. PurePath™ 콘솔 3 소프트웨어를 쉽게 사용하는 방법을 시청해 보세요.
PurePath 콘솔의 직관적인 그래픽 인터페이스는 고급 오디오 엔지니어링 전문 지식이 필요하지 않으므로 오디오 설계를 간단하게 만듭니다. 제품 개발 시간을 단축하는 간편한 그래픽 인터페이스에 구현된 PurePath 콘솔의 여러 고급 제어 기능을 통해 고도로 최적화된 오디오 성능, 최소 (...)| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSSOP (DKQ) | 56 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.