TMUX6219
- Dual supply range: ±4.5V to ±18V
- Single supply range: 4.5V to 36V
- Low on-resistance: 2.1Ω
- Low charge injection: -10pC
- High current support: 330mA (maximum) (VSSOP)
- High current support: 440mA (maximum) (WSON)
- –40°C to +125°C operating temperature
- 1.8V logic compatible
- Fail-safe logic
- Rail-to-rail operation
- Bidirectional signal path
- Break-before-make switching
The TMUX6219 is a complementary metal-oxide semiconductor (CMOS) switch in a single channel, 2:1 (SPDT) configuration. The device works with single supply (4.5V to 36V), dual supplies (±4.5V to ±18V), or asymmetric supplies (such as VDD = 5V, VSS = −8V). The TMUX6219 supports bidirectional analog and digital signals on the source (Sx) and drain (D) pins ranging from VSS to VDD.
The TMUX6219 can be enabled or disabled by controlling the EN pin. When disabled, both signal path switches are off. When enabled, the SEL pin can be used to turn on signal path 1 (S1 to D) or signal path 2 (S2 to D). All logic control inputs support logic levels from 1.8V to VDD, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.
The TMUX6219 is part of the precision switches and multiplexers family of devices. These devices have very low on and off leakage currents and low charge injection, allowing them to be used in high precision measurement applications.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TMUX6219 36V, Low Ron, 2:1 (SPDT) Switch with 1.8V Logic datasheet (Rev. E) | PDF | HTML | 2024. 7. 11 | ||
| Product overview | How to Connect Multiple Field Devices for Hart Communication | PDF | HTML | 2024. 3. 20 | |||
| 애플리케이션 노트 | How to Handle High Voltage Common Mode Applications using Multiplexers | PDF | HTML | 2022. 10. 3 | |||
| 기술 문서 | Protecting your RF amplifier stage with analog switches | PDF | HTML | 2020. 2. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LEADED-ADAPTER1 — TI의 5, 8, 10, 16 및 24핀 리드 패키지의 빠른 테스트를 위한 DIP 헤더 어댑터에 대한 표면 실장
EVM-LEADED1 보드를 사용하면 TI의 공통 리드가 있는 패키지를 브레드보드 방식으로 빠르게 테스트할 수 있습니다. 이 보드에는 TI의 D, DBQ, DCT, DCU, DDF, DGS, DGV 및 PW 표면 실장 패키지를 100mil DIP 헤더로 변환할 수 있는 풋프린트가 있습니다.
LEADLESS-ADAPTER1 — TI의 6, 8, 10, 12, 14, 16 및 20핀 리드 없는 패키지의 테스트를 위한 DIP 헤더 어댑터에 대한 표면 실장
TIDA-010962 — ATE(자동 테스트 장비) 80V 개별 부동 VI 레퍼런스 설계
이 레퍼런스 설계는 4사분면 개별 부동 전압 및 전류(VI) 설계를 나타낸 것입니다. 전압 출력은 ±40V 및 0V~80V 범위를 지원하며, 전류 범위는 500mA, 10mA, 10μA의 세 가지입니다. 이 설계는 아날로그 피드백 루프를 지원하며 FV(강제 전압), FI(강제 전류), 버퍼, 갱 모드에서 작동합니다. 이 레퍼런스 설계는 20비트 강제 DAC(디지털-아날로그 컨버터), 18비트, 2채널 ADC(아날로그-디지털 컨버터) 및 정밀 신호 체인을 사용해 보정 후 제어 측정에 0.01%의 정확도를 달성합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
| WSON (RQX) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.