TMP63
- Silicon-based thermistor with a positive temperature coefficient (PTC)
- Linear resistance change across temperature
- 100-kΩ nominal resistance at 25
°C (R25)
- ±1% maximum (0 °C to 70 °C)
- Wide operating temperature of –40 °C to +150 °C
- Consistent sensitivity across
temperature
- 6400 ppm/°C TCR (25 °C)
- 0.2% typical TCR tolerance across temperature range
- Fast thermal response time of 0.6 s (DEC)
- Long lifetime and robust performance
- Built-in fail-safe in case of short-circuit failures
- 0.3% typical long term sensor drift
Get started today with the Thermistor Design Tool, offering complete resistance vs temperature table (R-T table) computation, other helpful methods to derive temperature and example C-code.
Linear thermistors offer linearity and consistent sensitivity across temperature to enable simple and accurate methods for temperature conversion. Low power consumption and a small thermal mass minimize the impact of self-heating. With built-in failsafe behavior at high temperatures and powerful immunity to environmental variation, these devices are designed for a long lifetime of high performance. The small size of the TMP6 series also allows for close placement to heat sources and quick response times.
Take advantage of benefits over NTC thermistors such as no extra linearization circuitry, minimized calibration, less resistance tolerance variation, larger sensitivity at high temperatures, and simplified conversion methods to save time and memory in the processor.
The TMP63 is currently available in a 0402 footprint-compatible X1SON package and a 0603 footprint-compatible SOT-5X3 package.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMP6EVM — 선형 실리콘 TMP6 서미스터 평가 모듈
ASC-STUDIO-TMP6 — ASC studio for configuring all aspects of the TMP6 temperature sensor
TMP6EVM-GUI-WINDOWS — TMP6EVM GUI WINDOWS
TMP6-THERMISTOR-DESIGN — Thermistor Design Tool
TIDA-00848 — GPIO 핀을 사용하여 세그먼트 LCD 제어를 지원하는 싱글 칩 열 비용 분배기 레퍼런스 설계
세그먼트 LCD 디스플레이는 열 비용 분배기, 수도 계량기, 열 계량기와 같은 초저전력 계량 및 하위 계량 애플리케이션에 매우 보편적으로 사용되며 일반적으로 MCU의 전용 온칩 LCD 컨트롤러 모듈로 제어됩니다. 이 설계는 그러한 모듈이 없는 각종 TI MCU와 함께 사용할 수 있는 TI의 특허받은 대체 설계를 나타낸 것입니다. 저항 네트워크와 GPIO 제어 소프트웨어를 사용하여 CC1312R 무선 MCU 내 센서 컨트롤러 엔진에 LCD 구동 기능을 구현하여 소비 전력 7.3μA를 달성했습니다(연결된 LCD 없음). EN 834 (...)
TIDA-010300 — 20mm 풋프린트의 저전력 CGM 센서 레퍼런스 설계
이 CGM(연속 혈당 모니터) 레퍼런스 설계는 당뇨병 관리를 위한 저전력 연속 혈당 모니터링에 대한 TI의 최신 리소스를 위한 포괄적인 평가 플랫폼을 제공합니다. 이 레퍼런스 설계는 아날로그 프론트 엔드(AFE)를 사용하여 최대 2개 채널을 통해 정확한 저전력 전기 화학 감지를 수행합니다. TMP63 또는 TMP118은 체온을 모니터링하여 혈당 감지의 정확도를 높일 수 있습니다. 전기 화학 센서 판독값은 저전력 CC2340R5 Bluetooth® 저에너지(LE) 마이크로컨트롤러에 의해 처리되어 실시간 표시 및 데이터 수집을 위해 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-5X3 (DYA) | 2 | Ultra Librarian |
| X1SON (DEC) | 2 | Ultra Librarian |