TMP119
- TMP119 high-accuracy temperature sensor
- ±0.03°C (typical) from 0°C to 45°C
- ±0.08°C (maximum) from 0°C to 45°C
- ±0.09°C (maximum) from –25°C to 85°C
- ±0.12°C (maximum) from –40°C to 85°C
- ±0.15°C (maximum) from –55°C to 125°C
- ±0.2°C (maximum) from –55°C to 150°C
- Operating temperature range: –55°C to 150°C
- Low power consumption:
- 3.5µA, 1Hz conversion cycle
- 150nA shutdown current
- Supply range:
- 1.7V to 5.5V from –55°C to 70°C
- 1.8V to 5.5V from –55°C to 150°C
- 16-bit resolution: 0.0078°C (1 LSB)
- Programmable temperature alert limits
- Selectable averaging
- Strain Tolerance
- Digital offset for system correction
- General-purpose EEPROM: 48 bits
- NIST traceability
- SMBus™, I2C interface compatibility
- Medical grade: helps meet ASTM E1112 and ISO 80601-2-56
- RTDs replacement: PT100, PT500, PT1000
The TMP119 is a high-precision digital temperature sensor. The device is designed to help meet ASTM E1112 and ISO 80601 accuracy requirements for electronic patient thermometers. The TMP119 provides a 16-bit temperature result with a resolution of 0.0078°C and an accuracy of up to ±0.08°C across the temperature range of 0°C to 45°C with no calibration. The TMP119 has an interface that is I2C- and SMBus™-compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use. The TMP119 operates from 1.7V to 5.5V and typically consumes 3.5µA for a 1Hz conversion cycle.
For non-medical applications, the TMP119 can serve as a single chip digital alternative to a Platinum RTD. The TMP119 has an accuracy comparable to a Class AA RTD, while only using a fraction of the power of the power typically needed for a PT100 RTD. The TMP119 simplifies the design effort by removing many of the complexities of RTDs such as precision references, matched traces, complicated algorithms, and calibration. The device is designed to be strain tolerant, allowing robustness over typical strains often seen in PCB manufacturing, including device soldering, molding, underfill, and board flexing.
The TMP119 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.
추가 정보 요청
NIST 보정 문서를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TMP119 Ultra-High Accuracy, Low-Power, Digital Temperature Sensor With SMBus™- and I2 C-Compatible Interface datasheet | PDF | HTML | 2024. 1. 30 | |
| 애플리케이션 노트 | How to Design Alert Overtemperature and Undertemperature Systems | PDF | HTML | 2026. 3. 9 | ||
| Product overview | NIST Traceability for Temperature and Humidity Sensors | PDF | HTML | 2025. 4. 15 | ||
| Product overview | Ultra-Small Temperature Sensor Comparison Guide (Rev. A) | PDF | HTML | 2025. 1. 21 | ||
| 애플리케이션 노트 | Analyzing PCB Thermal Resistance in High-Accuracy Temperature Sensors (Rev. A) | PDF | HTML | 2024. 10. 15 | ||
| 인증서 | TMP119EVM EU Declaration of Conformity (DoC) | PDF | HTML | 2023. 9. 26 | ||
| 애플리케이션 노트 | Low-Power Design Techniques for Temperature-Sensing Applications | 2019. 6. 6 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMP119EVM — TMP119 온도 센서 평가 모듈
TMP119EVM은 TMP119 장치를 평가하고 비트 단위 레지스터 레벨까지 장치에 익숙해지기 위한 빠른 설정을 제공하도록 설계되었습니다. EVM은 TMP119 디지털 온도 센서의 성능을 평가할 수 있습니다. TMP119EVM은 탈착식 분리 가능한 TMP119 센서 보드 부분이 있어 측정 위치에 유연한 측정 기능이 있습니다.
TMP119EVM-GUI — TMP119 온도 센서 평가를 위한 TMP119EVM GUI
TIDA-010270 — Bluetooth® 저에너지를 사용한 지속적인 생명 징후 모니터링을 위한 바이오센싱 패치 레퍼런스 설계
바이오센싱 패치 레퍼런스 설계는 심전도(ECG), 심박수, 호흡, 페이스 펄스, 온도 및 동작과 같은 생명 징후를 지속적으로 모니터링하기 위한 최신 제품을 평가할 수 있는 플랫폼을 제공합니다. 이 설계는 정확한 단일 리드 ECG 신호 수집에 AFE4960을, 및 체온 모니터링에 TMP119를 사용합니다. 측정된 데이터는 CC2674R10에서 스마트폰 및 의료 모니터링 시스템과 같은 원격 터미널로 전송되어 실시간 디스플레이를 지원합니다. 온보드 LED(발광 다이오드)는 리드 오프, 저전력 및 Bluetooth® LE(저전력) 연결과 (...)
TIDA-010280 — 호흡, 속도 및 온도를 지원하는 소형, 무선, 6-리드 ECG 홀터 모니터 레퍼런스 설계
웨어러블 바이오센싱 홀스터 모니터 레퍼런스 설계는 심전도(ECG), 심박수, 호흡, 페이스 펄스, 온도 및 동작과 같은 생명 징후를 지속적으로 모니터링하는 TI의 최신 제품을 위한 평가 플랫폼을 제공합니다. 이 설계는 최대 6리드(4개 채널)의 저전력, 고해상도, 고집적 ECG 신호 수집에 AFE159RP4를 활용하고 체온 모니터링에 TMP119를 사용합니다. 측정된 데이터는 CC2674R10(Bluetooth® 저에너지 5.3 지원)을 통해 스마트폰이나 의료 모니터링 시스템과 같은 원격 터미널로 전송되어 실시간 디스플레이를 (...)
TIDA-010288 — 실시간 부정맥 분류를 위한 Edge-AI 지원 무선 ECG 홀터 모니터 레퍼런스 디자인
TIDA-01624 — Bluetooth® 지원 고정밀 피부 온도 측정 플렉스 PCB 패치 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YBG) | 6 | Ultra Librarian |