TMP100
- Digital Output: SMBus™, Two-Wire, and I2C Interface Compatibility
- Resolution: 9 to 12 Bits, User-Selectable
- Accuracy:
- ±1°C (Typical) from –55°C to 125°C
- ±2°C (Maximum) from –55°C to 125°C
- Low Quiescent Current: 45-µA, 0.1-µA Standby
- Wide Supply Range: 2.7 V to 5.5 V
- TMP100 Features Two Address Pins
- TMP101 Features One Address Pin and an ALERT Pin
- 6-Pin SOT-23 Package
The TMP100 and TMP101 devices are digital temperature sensors ideal for negative temperature coefficient (NTC) and positive temperature coefficient (PTC) thermistor replacement. The devices offer a typical accuracy of ±1°C without requiring calibration or external component signal conditioning. Device temperature sensors are highly linear and do not require complex calculations or look-up tables to derive the temperature. The on-chip, 12-bit ADC offers resolutions down to 0.0625°C. The devices are available in 6-Pin SOT-23 packages.
The TMP100 and TMP101 devices feature SMBus, Two-Wire, and I2C interface compatibility. The TMP100 device allows up to eight devices on one bus. The TMP101 device offers an SMBus Alert function with up to three devices per bus.
The TMP100 and TMP101 devices are ideal for extended temperature measurement in a variety of communication, computer, consumer, environmental, industrial, and instrumentation applications.
The TMP100 and TMP101 devices are specified for operation over a temperature range of −55°C to 125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TMP10x Temperature Sensor With I2C and SMBus Interface with Alert Function in SOT-23 Package datasheet (Rev. I) | PDF | HTML | 2015. 11. 10 | |
| 애플리케이션 노트 | How to Read and Interpret Digital Temperature Sensor Output Data (Rev. A) | PDF | HTML | 2025. 1. 21 | ||
| 애플리케이션 노트 | Interfacing an MSP430 MCU and a TMP100 Temperature Sensor (Rev. A) | 2018. 6. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ASC-STUDIO-TMP100 — ASC studio for configuring all aspects of the TMP100 temperature sensor
LM75SW-LINUX — I2C 온도 센서용 Linux 드라이버
The Linux driver support LM75 compatible Temperature Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline StatusAvailable in Linux Main line: Yes
Available through git.ti.com: N/A
- LM75A
- TMP100
- TMP101
- (...)
TIDA-00782 — DLP® 기술을 사용한 휴대용, 고휘도 HD 프로젝션 디스플레이 레퍼런스 디자인
This reference design, featuring the DLP Pico™ 0.45-inch WXGA display chipset enables use of HD resolution for projection display applications such as accessory projectors, smart projectors, mobile Smart TV, built in projectors like projection functionality inside notebooks, laptops and hot (...)
TIDM-CONNECTED-ETHERNET — 연결된 이더넷, USB 및 LCD 레퍼런스 디자인
This reference design will demonstrate several Ethernet- and LCD-enabled applications such as remote sensor monitoring, Ethernet configuration via web-based and LCD dashboards and aware applications that interface with weather websites.
TIDM-TM4C129CAMERA — ARM® Cortex®-M 마이크로컨트롤러(MCU)용 카메라 레퍼런스 설계
이 설계는 QVGA 디스플레이 패널과 원격 모니터링용 임베디드 웹 서버를 사용하여 네트워크 카메라를 구현합니다. 웹 서버용 250KB의 메모리 풋프린트가 있으므로 TM4C129x 마이크로컨트롤러에서 추가적인 사용자 지정을 위해 충분한 메모리를 사용할 수 있습니다.
TIDM-TM4C129XSDRAM — 고성능 마이크로컨트롤러의 SDRAM 메모리 인터페이싱
This reference design demonstrates how to implement and interface SDRAM Memory to the performance microcontroller TM4C129XNCZAD. The implementation is made possible by using the EPI Interface of the Microcontroller to interface a 256Mbit SDRAM at 60MHz which allows developers to implement (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |