TLVM13630
- Versatile
synchronous buck DC/DC module
- Integrated MOSFETs, inductor, and controller
- Wide input voltage range of 3 V to 36 V
- Adjustable output voltage from 1 V to 6 V with 1% setpoint accuracy over temperature
- 4-mm × 6-mm × 1.8-mm overmolded package
- –40°C to 125°C junction temperature range
- Frequency adjustable from 200 kHz to 2.2 MHz
- Negative output voltage capability
- Ultra-high
efficiency across the full load range
- 93% peak efficiency at 12 VIN, 5 VOUT,1 MHz
- External bias option for improved efficiency
- Shutdown quiescent current of 0.6 µA (typical)
- 0.4-V typical dropout voltage at 3-A load
- Ultra-low conducted and radiated
EMI signatures
- Low-noise package with dual input paths and integrated capacitors reduces switch ringing
- Constant-frequency FPWM mode of operation
- Meets CISPR 11 and 32 class B emissions
- Suitable for scalable power supplies
- Pin compatible with the TLVM13620 (36 V, 2 A)
- Inherent protection features for robust design
- Precision enable input and open-drain PGOOD indicator for sequencing, control, and VIN UVLO
- Hiccup-mode overcurrent protection
- Thermal shutdown protection with hysteresis
- Create a custom design using the TLVM13630 with the WEBENCH Power Designer
The TLVM13630 synchronous buck power module is a highly integrated 36-V, 3-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has pins for VIN and VOUT located at the corners of the package for optimized input and output capacitor layout placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.
With an output voltage range from 1 V to 6 V, the TLVM13630 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.
Although designed for small size and simplicity in space-constrained applications, the TLVM13630 module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, integrated VCC, bootstrap and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range for enhanced load transient performance, negative output voltage capability for inverting applications, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.
space
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TLVM13630 High-Density, 3-V to 36-V Input, 1-V to 6-V Output, 3-A Power Module With Enhanced HotRod™ QFN Package datasheet (Rev. B) | PDF | HTML | 2022. 1. 10 | ||
| 애플리케이션 노트 | Soldering Considerations for Power Modules (Rev. C) | PDF | HTML | 2024. 3. 14 | |||
| 백서 | Addressing Factory Automation Challenges with Innovations in Power Design | PDF | HTML | 2021. 9. 28 | |||
| 인증서 | TLVM13630EVM EU Declaration of Conformity (DoC) | 2021. 4. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TLVM13630EVM — TLVM13630 3V~36V 입력, 1V~6V, 3A 출력 전원 모듈 평가 보드
SLVRBK8 — TLVM136x0 Power Module Quickstart Design Tool
TLVM13620, TLVM13630, TLVM13640 및 TLVM13660 전원 모듈 빠른 시작 계산기 설계 툴을 시작합니다. 이 독립형 툴은 이 동기식 벅 전원 모듈 제품군에 기반한 DC/DC 벅 레귤레이터 설계를 통해 전원 공급 장치 엔지니어를 용이하게 하고 지원합니다. 따라서 사용자는 애플리케이션 요구 사항을 충족하기 위해 최적화된 설계에 신속하게 도착할 수 있습니다.
TIDA-010261 — 데이터 라인을 통한 전원을 지원하는 10BASE-T1L 싱글 페어 이더넷 센서 레퍼런스 설계
이 레퍼런스 설계에서는 PoDL(Power over Data Line)을 포함한 싱글 페어 이더넷(SPE) 통신 백 엔드의 구현을 보여줍니다. 이 설계는 한 쪽의 아날로그 프론트 엔드와 다른 쪽의 이더넷 물리적(PHY) 계층을 인터페이싱하는 Sitara™ AM2434 MCU를 사용합니다. 강력한 MCU를 사용하면 센서 데이터를 이더넷에 전달할 뿐만 아니라 에지에서 데이터 처리를 수행할 수도 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| B0QFN (RDH) | 30 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.