이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TAC5112 활성 동적 범위 105dB ADC 및 동적 범위 114dB DAC를 지원하는 저전력 스테레오 오디오 코덱 10-dB better ADC SNR, 6-dB better DAC SNR, software controlled, low-power and dual TDM, I2S, smaller 4mm x 4mm package

제품 상세 정보

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Control interface I2C Analog inputs 6 Analog outputs 6 Features Matrix mixing, Notch filter, Phase-locked loop (PLL), Stereo headphone amplifier Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 102 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Control interface I2C Analog inputs 6 Analog outputs 6 Features Matrix mixing, Notch filter, Phase-locked loop (PLL), Stereo headphone amplifier Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 102 Operating temperature range (°C) -40 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • Stereo audio DAC:
    • 102-dBA signal-to-noise ratio
    • 16-, 20-, 24-, or 32-bit data
    • Supports sample rates from 8 kHz to 96 kHz
    • 3D, bass, treble, EQ, or de-emphasis effects
    • Flexible power saving modes and performance are available
  • Stereo audio ADC:
    • 92-dBA signal-to-noise ratio
    • Supports sample rates from 8 kHz to 96 kHz
    • Digital signal processing and noise filtering available during record
  • Six audio input pins:
    • One stereo pair of single-ended inputs
    • One stereo pair of fully differential inputs
  • Six audio output drivers:
    • Stereo fully differential or single-ended headphone drivers
    • Fully differential stereo line outputs
  • Low power: 14-mW stereo 48-kHz playback with 3.3-V analog supply
  • Ultra-low-power mode with passive analog bypass
  • Programmable I/O analog gains
  • Automatic gain control (AGC) for record
  • Programmable microphone bias level
  • Programmable PLL for flexible clock generation
  • I2C control bus
  • Audio serial data bus supports I2S, left- and right-justified, DSP, and TDM modes
  • Extensive modular power control
  • Power supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital Core: 1.525 V to 1.95 V
    • Digital I/O: 1.1 V to 3.6 V
  • Package: 5-mm × 5-mm, 32-pin VQFN
  • Stereo audio DAC:
    • 102-dBA signal-to-noise ratio
    • 16-, 20-, 24-, or 32-bit data
    • Supports sample rates from 8 kHz to 96 kHz
    • 3D, bass, treble, EQ, or de-emphasis effects
    • Flexible power saving modes and performance are available
  • Stereo audio ADC:
    • 92-dBA signal-to-noise ratio
    • Supports sample rates from 8 kHz to 96 kHz
    • Digital signal processing and noise filtering available during record
  • Six audio input pins:
    • One stereo pair of single-ended inputs
    • One stereo pair of fully differential inputs
  • Six audio output drivers:
    • Stereo fully differential or single-ended headphone drivers
    • Fully differential stereo line outputs
  • Low power: 14-mW stereo 48-kHz playback with 3.3-V analog supply
  • Ultra-low-power mode with passive analog bypass
  • Programmable I/O analog gains
  • Automatic gain control (AGC) for record
  • Programmable microphone bias level
  • Programmable PLL for flexible clock generation
  • I2C control bus
  • Audio serial data bus supports I2S, left- and right-justified, DSP, and TDM modes
  • Extensive modular power control
  • Power supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital Core: 1.525 V to 1.95 V
    • Digital I/O: 1.1 V to 3.6 V
  • Package: 5-mm × 5-mm, 32-pin VQFN

The TLV320AIC3104 is a low-power stereo audio codec with stereo headphone amplifier, as well as multiple inputs and outputs that are programmable in single-ended or fully differential configurations. The device includes extensive register-based power control is included, thus enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply, making the device ideal for portable battery-powered audio and telephony applications.

The record path of the TLV320AIC3104 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. During record, programmable filters can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3104 is a low-power stereo audio codec with stereo headphone amplifier, as well as multiple inputs and outputs that are programmable in single-ended or fully differential configurations. The device includes extensive register-based power control is included, thus enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply, making the device ideal for portable battery-powered audio and telephony applications.

The record path of the TLV320AIC3104 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. During record, programmable filters can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
13개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TLV320AIC3104 Low-Power Stereo Audio Codec for Portable Audio and Telephony datasheet (Rev. G) PDF | HTML 2021/02/15
User guide Quick-Start Guide for TLV320AIC310xEVM Control (Rev. A) PDF | HTML 2022/03/15
Application note Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019/12/31
Application note Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019/06/27
Application note Common Noise Issues in Audio Codecs 2017/07/21
Application note Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013/10/28
Application note Headset Detection for TLV320AIC33 and TLV320AIC310x Family 2010/06/22
Application note Interfacing an I2S Device to an MSP430 Device (Rev. A) 2010/03/22
Application note Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009/10/30
Application note Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009/07/08
Application note TLV320AIC3104 Programming Made Easy 2009/02/13
More literature TLV320AIC3104EVM Readme Page Thank You Letter 2007/04/26
Application note How to Set the TSC/AIC EVM to Record & Playback Audio or Other Sound Through PC 2004/12/14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TLV320AIC3104EVM-K — TLV320AIC3104 평가 모듈 및 USB 마더보드

TLV320AIC3104EVM-K는 EVM과 PDK 보드로 구성되어 있어 개인용 컴퓨터에서 사용할 수 있습니다. TLV320AIC3104EVM은 텍사스 인스트루먼트의 모듈식 EVM 폼 팩터로 제조된 EVM입니다. 이 평가 모듈(EVM)은 여러 입력 및 출력, 광범위한 오디오 라우팅, 믹싱 및 효과 기능을 갖춘 완전한 스테레오 오디오 코덱입니다. 이 EVM을 통해 저전력 스테레오 오디오 코덱인 TLV320AIC3104 장치를 직접 평가할 수 있습니다.

사용 설명서: PDF
TI.com에서 구매할 수 없음
드라이버 또는 라이브러리

TLV320AIC31XX-DRIVERS — TLV320AIC31xx 코덱 제품군 Linux 드라이버 지원

이러한 Linux 드라이버는 TLV320AIC31xx 장치 제품군에서 TI의 저전력 오디오 코덱을 지원하며 .c 및 .h 파일을 모두 포함합니다. 아래의 "써드파티로 이동" 버튼을 사용하면 git.kernal.org 에서 해당 드라이버를 다운로드할 수 있습니다.

Linux 메인 라인 상태
Linux 메인 라인에서 사용 가능: 예
git.ti.com에서 구입 가능: 해당 없음

Linux 장치 트리 문서

수정 사항 및 코드 개선 사항

이 드라이버에 (...)

시뮬레이션 모델

TLV320AIC3104 IBIS Model

SLIM118.ZIP (83 KB) - IBIS Model
계산 툴

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

SLAR163 Audio CODEC/ADC PLL Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
레퍼런스 디자인

TIDEP0076 — DLP® 구조적 조명을 사용한 AM572x 프로세서 기반의 3D 머신 비전 레퍼런스 디자인

TIDEP0076 3D 머신 비전 설계는 구조적 조명 원칙에 기반을 둔 임베디드 3D 스캐너를 설명합니다. Sitara™ AM57xx 프로세서 SoC(System on Chip)와 함께 디지털 카메라를 사용하면 DLP4500 기반 프로젝터의 반사 조명 패턴을 캡처할 수 있습니다. 캡처한 패턴의 후속 처리, 개체의 3D 포인트 클라우드 계산 및 3D 시각화는 모두 AM57xx 프로세서 SoC 내에서 수행됩니다. 이 설계는 호스트 PC 기반 구현보다 전력, 단순성, 비용 및 크기의 이점이 포함된 임베디드 솔루션을 제공합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDEP0046 — DSP 가속화용 OpenCL을 사용한 AM57x의 몬테카를로 시뮬레이션 레퍼런스 디자인

TI’s high performance ARM® Cortex®-A15 based AM57x processors also integrate C66x DSPs. These DSPs were designed to handle high signal and data processing tasks that are often required by industrial, automotive and financial applications. The AM57x OpenCL implementation makes it easy (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDEP0047 — TI의 AM57x 프로세서를 사용한 전력 및 열 설계 고려 사항 레퍼런스 설계

This is a reference design based on the AM57x processor and companion TPS659037 power management integrated circuit (PMIC).  This design specifically highlights important power and thermal design considerations and techniques for systems designed with AM57x and TPS659037.  It includes (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RHB) 32 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상