이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 TAC5112 활성 동적 범위 105dB ADC 및 동적 범위 114dB DAC를 지원하는 저전력 스테레오 오디오 코덱 PCM code with >10dB higher SNR for both ADC and DAC

제품 상세 정보

Number of ADC channels 1 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Control interface SPI Analog inputs 2 Analog outputs 2 Features Phase-locked loop (PLL), Stereo headphone amplifier, Stereo speaker amplifier Sampling rate (max) (kHz) 53 Rating Catalog ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 97 Operating temperature range (°C) -40 to 85
Number of ADC channels 1 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Control interface SPI Analog inputs 2 Analog outputs 2 Features Phase-locked loop (PLL), Stereo headphone amplifier, Stereo speaker amplifier Sampling rate (max) (kHz) 53 Rating Catalog ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 97 Operating temperature range (°C) -40 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • Low Power High Quality Audio Codec
  • Stereo Audio DAC and Mono Audio ADC Support Rates up to 48 ksps
  • High Quality 97-dBA Stereo Audio Playback Performance
  • Low Power: 11-mW Stereo Audio Playback at 48 ksps
  • On-Chip 325-mW, 8- Speaker Driver
  • Stereo Headphone Amplifier With Capless Output Option
  • Microphone Preamp and Hardware Automatic Gain Control
  • Integrated PLL for Flexible Audio Clock Generation
  • Programmable Digital Audio Bass/Treble/EQ/De-Emphasis
  • Direct Battery Measurement Accepts up to 6-V Input
  • On-Chip Temperature Measurement
  • SPI™ and I²S™ Serial Interface
  • Full Power-Down Control
  • 32-Pin 5×5 mm QFN Package
  • APPLICATIONS
    • Cellular and Smart Phones
    • MP3 Players
    • Digital Still Cameras
    • Digital Video Camcorders

SPI is a trademark of Motorola.
I²S is a trademark of Phillips Electronics.

  • Low Power High Quality Audio Codec
  • Stereo Audio DAC and Mono Audio ADC Support Rates up to 48 ksps
  • High Quality 97-dBA Stereo Audio Playback Performance
  • Low Power: 11-mW Stereo Audio Playback at 48 ksps
  • On-Chip 325-mW, 8- Speaker Driver
  • Stereo Headphone Amplifier With Capless Output Option
  • Microphone Preamp and Hardware Automatic Gain Control
  • Integrated PLL for Flexible Audio Clock Generation
  • Programmable Digital Audio Bass/Treble/EQ/De-Emphasis
  • Direct Battery Measurement Accepts up to 6-V Input
  • On-Chip Temperature Measurement
  • SPI™ and I²S™ Serial Interface
  • Full Power-Down Control
  • 32-Pin 5×5 mm QFN Package
  • APPLICATIONS
    • Cellular and Smart Phones
    • MP3 Players
    • Digital Still Cameras
    • Digital Video Camcorders

SPI is a trademark of Motorola.
I²S is a trademark of Phillips Electronics.

The TLV320AIC26 is a high-performance audio codec with 16/20/24/32-bit 97-dBA stereo playback, mono record functionality at up to 48 ksps. A microphone input includes built-in preamp and hardware automatic gain control, with single-ended or fully-differential input capability.

The audio output drivers on the ’AIC26 are highly flexible, having software-programmable low or high-power drive modes to optimize system power dissipation. The outputs can be configured to supply up to 325 mW into a bridge terminated 8- headphone amplifiers in ac-coupled or capless output configurations, and can supply a stereo line-level output.

A programmable digital audio effects processor enables bass, treble, midrange, or equalization playback processing. The digital audio data format is programmable to work with popular audio standard protocols (I²S, DSP, Left/Right Justified) in master or slave mode, and also includes an on-chip programmable PLL for flexible clock generation capability. Highly configurable software power control is provided, enabling stereo audio playback at 48 ksps at 11 mW with a 3.3-V analog supply level.

The ’AIC26 offers a 12-bit measurement ADC and internal reference voltage, as well as two battery measurement inputs capable of reading battery voltages up to 6 V, while operating at an analog supply as low as 2.7 V. It includes an on-chip temperature sensor capable of reading 0.3°C resolution. The ’AIC26 is available in a 32 lead QFN.

The TLV320AIC26 is a high-performance audio codec with 16/20/24/32-bit 97-dBA stereo playback, mono record functionality at up to 48 ksps. A microphone input includes built-in preamp and hardware automatic gain control, with single-ended or fully-differential input capability.

The audio output drivers on the ’AIC26 are highly flexible, having software-programmable low or high-power drive modes to optimize system power dissipation. The outputs can be configured to supply up to 325 mW into a bridge terminated 8- headphone amplifiers in ac-coupled or capless output configurations, and can supply a stereo line-level output.

A programmable digital audio effects processor enables bass, treble, midrange, or equalization playback processing. The digital audio data format is programmable to work with popular audio standard protocols (I²S, DSP, Left/Right Justified) in master or slave mode, and also includes an on-chip programmable PLL for flexible clock generation capability. Highly configurable software power control is provided, enabling stereo audio playback at 48 ksps at 11 mW with a 3.3-V analog supply level.

The ’AIC26 offers a 12-bit measurement ADC and internal reference voltage, as well as two battery measurement inputs capable of reading battery voltages up to 6 V, while operating at an analog supply as low as 2.7 V. It includes an on-chip temperature sensor capable of reading 0.3°C resolution. The ’AIC26 is available in a 32 lead QFN.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TLV320AIC3101 활성 6입력, 6출력, 스피커/HP 증폭기 및 향상된 디지털 효과를 지원하는 저전력 스테레오 코덱 Stereo Codec 102/92dB SNR DAC/ADC, 6 SE/Differential I/O, programmable PLL

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
15개 모두 보기
유형 직함 날짜
* Data sheet Low Power Stereo Audio CODEC w/Headphone/Speaker Amp & 12-Bit Batt/Temp/Aux ADC datasheet 2003/12/17
Application note Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019/12/31
Application note Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019/06/27
Application note Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013/10/28
Application note AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A) 2010/09/30
Application note Audio Serial Interface Configurations for Audio Codecs 2010/09/22
Application note Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009/10/30
Application note Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009/07/08
Application note The Built-In AGC Function in TSC2100/2101 & TLV320AIC26/28/32/33 Devices 2005/09/13
Application note Using the PGA Function in TSC210x/AIC26/AIC28/DAC26 Devices 2005/06/03
Application note Programming Audio Power Up/Down on TSC210x & TLV320AIC26/28 (Rev. A) 2005/05/05
Application note How to Set the TSC/AIC EVM to Record & Playback Audio or Other Sound Through PC 2004/12/14
Application note Interface TSC Through McBSP 2004/10/28
EVM User's guide TLV320AIC26EVM - User Guide 2004/03/12
Application note TSC2100 WinCE Generic Drivers 2004/03/08

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

드라이버 또는 라이브러리

TLV320AIC2X-DRIVERS — TLV320AIC2X 코덱 제품군 Linux 드라이버 지원

이러한 Linux 드라이버는 장치 제품군 TLV320AIC2x를 위한 TI의 저전력 오디오 코덱을 지원합니다. 이러한 드라이버에는 .c 및 .h 파일이 모두 포함됩니다. "써드파티로 이동" 버튼을 클릭하면 git.kernal.org로 이동하여 해당 드라이버를 다운로드할 수 있습니다.

Linux 메인 라인 상태
Linux 메인 라인에서 사용 가능: 예
git.ti.com에서 구입 가능: 해당 없음


수정 사항 및 코드 개선 사항
이 드라이버에 추가해야 할 수정 사항 및/또는 코드 개선 사항이 있는 경우
다음 중 한 가지 방법으로 진행합니다.

1. (...)
계산 툴

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
오디오 코덱
TLV320AIC26 HP/스피커 증폭기 및 12비트 측정 ADC를 지원하는 저전력 모노 ADC/스테레오 DAC TLV320AIC28 6 오디오 입력 및 HP/스피커 증폭기를 지원하는 저전력 모노 ADC/스테레오 DAC TLV320AIC29 6 오디오 입력 및 HP/스피커 증폭기를 지원하는 저전력 모노 ADC/스테레오 DAC TLV320AIC3007 통합 클래스-D 증폭기를 지원하는 저전력 스테레오 코덱 TLV320AIC31 6입력, 6출력, 내장 헤드폰/스피커 증폭기, 3D 효과를 지원하는 저전력 스테레오 코덱 TLV320AIC3100 오디오 처리를 지원하는 저전력 오디오 코덱 및 모노 클래스-D 증폭기 TLV320AIC3101 6입력, 6출력, 스피커/HP 증폭기 및 향상된 디지털 효과를 지원하는 저전력 스테레오 코덱 TLV320AIC3104 6입력, 6출력, HP 증폭기 및 고급 디지털 효과를 지원하는 저전력 스테레오 코덱 TLV320AIC3105 6입력, 6출력, HP 증폭기 및 고급 디지털 효과를 지원하는 저전력 스테레오 코덱 TLV320AIC3106 저전력 스테레오 코덱, 입력 10개, 출력 7개, 헤드폰 증폭기 및 고급 디지털 효과 TLV320AIC3107 통합 모노 클래스-D 증폭기를 지원하는 저전력 스테레오 코덱 TLV320AIC3110 1.3W 스테레오 클래스-D 스피커 증폭기를 지원하는 저전력 오디오 코덱 TLV320AIC3111 임베디드 miniDSP 및 스테레오 클래스-D 스피커 증폭기를 지원하는 저전력 오디오 코덱 TLV320AIC3120 miniDSP 및 2.5W 모노 클래스-D 스피커 증폭기를 지원하는 저전력 오디오 코덱 TLV320AIC32 저전력 스테레오 코덱(6입력, 6출력, HP/스피커 증폭기 및 3D 효과 포함) TLV320AIC3204 PowerTune™ 기술을 지원하는 초저전력 스테레오 오디오 코덱 TLV320AIC3206 DirectPath™ HP 증폭기를 지원하는 초저전력 스테레오 코덱 TLV320AIC3254 프로그래머블 miniDSP를 지원하는 초저전력 스테레오 오디오 코덱 TLV320AIC3256 miniDSP 및 DirectPath™ HP 증폭기를 지원하는 초저전력 스테레오 코덱 TLV320AIC33 저전력 스테레오 코덱(10입력, 7출력, HP/스피커 증폭기 및 고급 디지털 효과 포함) TLV320AIC34 저전력 4채널 코덱
오디오 ADC
TLV320ADC3001 92dB SNR 저전력 스테레오 ADC(ADC3001) TLV320ADC3101 디지털 마이크 지원 및 miniDSP를 지원하는 92dB SNR 저전력 스테레오 ADC TSC2100 스테레오 DAC/모노 ADC(HP/스피커 증폭기 포함)를 지원하는 4선 터치 스크린 컨트롤러 TSC2101 스테레오 DAC/모노 ADC(HP/스피커 증폭기 포함)를 지원하는 4선 터치 스크린 컨트롤러 TSC2102 스테레오 DAC(HP 증폭기 포함)를 지원하는 4선 터치 스크린 컨트롤러 TSC2117 저전력 모노 ADC/스테레오 DAC를 지원하는 4선 터치 스크린 컨트롤러 TSC2301 4선 터치 스크린 컨트롤러, 스테레오 코덱, HP 증폭기 포함(키패드 인터페이스 + 6 GPIO)
General-purpose audio amplifiers
LM48901 2.8W, 스테레오, 디지털 입력 클래스 AB 오디오 증폭기 LM48903 SMD 패키지 옵션이 있는 2.8W, 스테레오, 디지털 입력 클래스 AB 오디오 증폭기 TAS2505 2W, 모노, 디지털 및 아날로그 입력 클래스 D 오디오 증폭기(오디오 프로세싱 및 모노 헤드폰 증폭기 지원) TAS2521 miniDSP 및 18mW, 모노 헤드폰 드라이버를 지원하는 2W, 모노, 디지털 및 아날로그 입력 클래스-D 오디오 증폭기 TPA6201A1 1W 모노, 완전 차동, 클래스-AB 오디오 증폭기
Automotive audio amplifiers
TAS2505-Q1 오디오 프로세싱을 지원하는 차량용, 2W, 모노, 디지털 또는 아날로그 입력 클래스-D 증폭기
Speaker, TV & soundbar audio amplifiers
TAS5713PHP TAS5713PHP
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RHB) 32 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상