TLV2764

활성

쿼드, 3.6V, 500kHz, RRIO 연산 증폭기

지금 주문하기

데이터 시트

document-pdfAcrobat Family of 1.8-V MicroPower Rail-to-Rail Input/Output Op Amps with Shutdown datasheet (Rev. F) (영어)

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.

TLV9044

활성

낮은 정동작 전류(10μA)를 지원하는 쿼드, 5.5V, 350kHz 초저 1.2V 연산 증폭기 Lower power (0.1mA Iq), lower noise (66nV/√Hz), better accuracy (2.25mV Vos max)

TLV2764

활성

데이터 시트

지금 주문하기

제품 상세 정보

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

3.6

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.5

Slew rate (typ) (V/µs)

0.22

Vos (offset voltage at 25°C) (max) (mV)

3.5

Iq per channel (typ) (mA)

0.02

Vn at 1 kHz (typ) (nV√Hz)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

9

Input bias current (max) (pA)

15

CMRR (typ) (dB)

76

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.01

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

3.6

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.5

Slew rate (typ) (V/µs)

0.22

Vos (offset voltage at 25°C) (max) (mV)

3.5

Iq per channel (typ) (mA)

0.02

Vn at 1 kHz (typ) (nV√Hz)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

9

Input bias current (max) (pA)

15

CMRR (typ) (dB)

76

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.01

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

PDIP (N)

14

181.42 mm² (19.3 mm × 9.4 mm)

Low Supply Voltage … 1.8 V to 3.6 V
Very Low Supply Current … 20 µA
(per channel)
Ultralow Power Shut-Down Mode
- I_DD(SHDN) = 10 nA/Channel
CMOS Rail-to-Rail Input/Output
Input Common-Mode Voltage Range …
0.2 V to V_DD + 0.2 V
Input Offset Voltage … 550 µV
Wide Bandwidth … 500 kHz
Slew Rate … 0.20 V/µs
Specified Temperature Range:
0°C to 70°C … Commercial Grade
–40°C to 85°C … Industrial Grade
Ultrasmall Packaging
5 or 6 Pin SOT-23 (TLV2760/1)
8 or 10 Pin MSOP (TLV2762/3)
Universal Op-Amp EVM

Low Supply Voltage … 1.8 V to 3.6 V
Very Low Supply Current … 20 µA
(per channel)
Ultralow Power Shut-Down Mode
- I_DD(SHDN) = 10 nA/Channel
CMOS Rail-to-Rail Input/Output
Input Common-Mode Voltage Range …
0.2 V to V_DD + 0.2 V
Input Offset Voltage … 550 µV
Wide Bandwidth … 500 kHz
Slew Rate … 0.20 V/µs
Specified Temperature Range:
0°C to 70°C … Commercial Grade
–40°C to 85°C … Industrial Grade
Ultrasmall Packaging
5 or 6 Pin SOT-23 (TLV2760/1)
8 or 10 Pin MSOP (TLV2762/3)
Universal Op-Amp EVM

The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 µA while operating down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which allows the devices to be operated from (.1.8 V supplies down to .0.9 V) two AA or AAA cells. The devices have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency measurement applications desiring long active battery life.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 µA while operating down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which allows the devices to be operated from (.1.8 V supplies down to .0.9 V) two AA or AAA cells. The devices have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency measurement applications desiring long active battery life.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

filter

기타 범용 연산 증폭기 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

3개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	데이터 시트	Family of 1.8-V MicroPower Rail-to-Rail Input/Output Op Amps with Shutdown datasheet (Rev. F)		2013. 8. 20
	e북	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	2017. 3. 28
	애플리케이션 노트	TLV276x EMI Immunity Performance		2012. 11. 15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈

증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.

AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.