TLV2374-Q1

활성

오토모티브 등급, 쿼드, 16V, 3MHz, RRIO 연산 증폭기

지금 주문하기

데이터 시트

document-pdfAcrobat TLV237x-Q1 550-µA/Channel, 3-MHz Rail-to-Rail Input and Output Operational Amplifiers datasheet (Rev. B) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.

TLV9154-Q1

활성

오토모티브 등급, 쿼드, 16V, 4.5MHz, 저전력 연산 증폭기 Higher GBW (4.5 MHz), faster slew rate (21 V/us), lower offset voltage (0.895 mV), lower noise (10.8 nV/√Hz), higher output current (75 mA)

TLV2374-Q1

활성

지금 주문하기

제품 상세 정보

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In, Out

GBW (typ) (MHz)

3

Slew rate (typ) (V/µs)

2.4

Vos (offset voltage at 25°C) (max) (mV)

4.5

Iq per channel (typ) (mA)

0.55

Vn at 1 kHz (typ) (nV√Hz)

39

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

60

CMRR (typ) (dB)

72

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.07

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In, Out

GBW (typ) (MHz)

3

Slew rate (typ) (V/µs)

2.4

Vos (offset voltage at 25°C) (max) (mV)

4.5

Iq per channel (typ) (mA)

0.55

Vn at 1 kHz (typ) (nV√Hz)

39

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

60

CMRR (typ) (dB)

72

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.07

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
Rail-to-Rail Input and Output
Wide Bandwidth: 3 MHz
High Slew Rate: 2.4 V/µs
Supply Voltage Range: 2.7 V to 16 V
Supply Current: 550 µA/Channel
Input Noise Voltage: 39 nV/√Hz
Input Bias Current: 1 pA
Ultra-Small Packaging:
- 5-Pin SOT-23 (TLV2371-Q1)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
Rail-to-Rail Input and Output
Wide Bandwidth: 3 MHz
High Slew Rate: 2.4 V/µs
Supply Voltage Range: 2.7 V to 16 V
Supply Current: 550 µA/Channel
Input Noise Voltage: 39 nV/√Hz
Input Bias Current: 1 pA
Ultra-Small Packaging:
- 5-Pin SOT-23 (TLV2371-Q1)

The TLV237x-Q1 devices are single-supply operational amplifiers providing rail-to-rail input and output capability. The TLV237x-Q1 takes the minimum operating supply voltage down to 2.7 V and up to 16 V over the extended automotive temperature range. Therefore, the wide voltage range can support both start-stop functionality and a connection directly to the typical 12-V battery. The rail-to-rail capabilities allow the device to maximize the output signal and avoid clipping.

The CMOS inputs enable high-impedance suitable for engine control units (ECU), body control modules (BCM), battery management systems (BMS), and HEV/EV inverters. This also allows the user to draw a lower offset voltage and maintain low power consumption to help meet overall system needs for quiescent current such as in infotainment or cluster, HEV/EV, and powertrain.

Additionally, the TLV237x-Q1 family supports a high common-mode rail to the supply voltage. This feature sets no gain limitations and can support the input at any level without the concern for any phase reversal.

The TLV237x-Q1 devices are single-supply operational amplifiers providing rail-to-rail input and output capability. The TLV237x-Q1 takes the minimum operating supply voltage down to 2.7 V and up to 16 V over the extended automotive temperature range. Therefore, the wide voltage range can support both start-stop functionality and a connection directly to the typical 12-V battery. The rail-to-rail capabilities allow the device to maximize the output signal and avoid clipping.

The CMOS inputs enable high-impedance suitable for engine control units (ECU), body control modules (BCM), battery management systems (BMS), and HEV/EV inverters. This also allows the user to draw a lower offset voltage and maintain low power consumption to help meet overall system needs for quiescent current such as in infotainment or cluster, HEV/EV, and powertrain.

Additionally, the TLV237x-Q1 family supports a high common-mode rail to the supply voltage. This feature sets no gain limitations and can support the input at any level without the concern for any phase reversal.

filter

기타 범용 연산 증폭기 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

2개 모두 보기

상위 문서	유형	직함	형식 옵션	최신 영어 버전 다운로드		날짜
*	데이터 시트	TLV237x-Q1 550-µA/Channel, 3-MHz Rail-to-Rail Input and Output Operational Amplifiers datasheet (Rev. B)	PDF \| HTML		2016. 12. 23
	e북	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML		2017. 3. 28

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈

증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.

AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.