이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TLV1805-Q1
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C6
- 3.3 V to 40 V supply range
- Low quiescent current: 135 µA
- High peak current push-pull output
- Rail-to-rail inputs with phase reversal protection
- Built-In hysteresis: 14mV
- 250ns propagation delay
- Low input offset voltage: 500 µV
- Shutdown with high-z output
- Power-On Reset (POR)
- SOT-23-6 package
The TLV1805-Q1 high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current, shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, overcurrent sensing, and overvoltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.
The high peak current push-pull output stage, which is unique for high-voltage comparators, offers the advantage of allowing the output to actively drive the load to either supply rail with a fast edge rate. This is especially valuable in applications where a MOSFET gate needs to be driven high or low quickly in order to connect or disconnect a host from an unexpected high voltage supply. Additional features such as low input offset voltage, low input bias currents and High-Z shutdown make the TLV1805-Q1 flexible enough to handle a broad range of applications. Power-On reset prevents false outputs at power-up.
The TLV1805-Q1 is AEC-Q100 qualified in a 6-pin SOT-23 package and is specified for operation across the automotive Grade 1 temperature range of –40°C to +125°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TLV1805-Q1 40V, Rail-to-Rail Input, Push-Pull Output, High Voltage Automotive Comparator with Shutdown datasheet (Rev. B) | PDF | HTML | 2020. 1. 30 | ||
| Product overview | Implementing SAE JI772 Pilot Wire System in EV Charging Station With Comparators | PDF | HTML | 2024. 4. 5 | |||
| 기능 안전 정보 | TLV1805-Q1 Functional Safety, FIT Rate and Failure Mode Distribution | 2020. 3. 17 | ||||
| 애플리케이션 노트 | Overcurrent latch circuit | PDF | HTML | 2019. 8. 9 | |||
| 애플리케이션 노트 | Using Comparators in Reverse Current Applications (Rev. A) | 2019. 6. 11 | ||||
| 애플리케이션 노트 | TLV1805-Q1 EVM ISO Testing Results | 2019. 2. 22 | ||||
| Application brief | Overvoltage protection with comparator circuit | PDF | HTML | 2019. 1. 17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈
증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.
AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.
- D(SOIC-8 및 SOIC-14)
- PW(TSSOP-14)
- DGK(VSSOP-8)
- (...)
TLV1805EVMQ1 — 역전류 방지를 위한 TLV1805-Q1 평가 모듈
PMP21953 — 40V 절연 콤퍼레이터 기반 전원 공급 장치 레퍼런스 설계
이 레퍼런스 설계는 낮은 전류 용량을 지원하는 절연 전원 공급 장치의 비용 중심적 접근 방식을 보여줍니다. 이 설계는 세 가지 토폴로지의 3가지 설계로 구성됩니다. 세 가지 설계 옵션은 모두 자유롭게 동작하는 오실레이터와 드라이버로 작동하는 고전압 비교기 TLV1805-Q1을 기반으로 합니다. 세 가지 설계 모두 미조정 방식이며, 출력 전압이 입력 전압에 의해 바로 결정됩니다.
TIDA-020023 — 고정밀 전류 센서를 탑재한 오토모티브 비례 솔레노이드 드라이브 레퍼런스 설계
TIDA-050008 — 향상된 전압 감시 기능을 갖춘 ADAS 전원 레퍼런스 설계
이 차량용 전원 레퍼런스 설계는 ADAS(첨단 운전자 보조 시스템)의 안전 MCU를 위한 추가 정밀 전압 감시 및 윈도우 워치독을 지원합니다. 이러한 ADAS 시스템은 자동 긴급 브레이크, 차선 이탈 보조 및 적응형 크루즈 제어와 같은 주행 기능을 제어할 수 있습니다. 고정밀 전압 감지기는 각 레일을 모니터링하여 고객이 기능 안전 목표를 달성할 수 있도록 감시를 개선합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.