TLIN4029A-Q1
- AEC-Q100 Qualified for automotive applications
- Compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO 17987–4 electrical physical layer (EPL) specification
- Conforms to SAE J2602-1 LIN network for vehicle applications
- Functional Safety-Capable
- Supports 12V LIN and 24V LIN applications
- Expanded bus fault protection range to support 48V systems
- LIN transmit data rate up to 20kbps
- LIN receive data rate up to 100kbps
- Wide operational supply voltage range: 4V to 48V
- Sleep mode: ultra-low current consumption allows wake-up event from:
- LIN bus
- Local wake up through EN
- Power up and down glitch free operation on LIN bus and RXD output
- Protection features:
- ±70V LIN bus fault tolerant
- Under voltage protection on VSUP
- TXD Dominant time out protection (DTO)
- Thermal shutdown protection
- Unpowered node or ground disconnection failsafe at system level.
- Available in SOIC (8) and leadless VSON (8) with wettable flanks
The TLIN4029A-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO 17987–4 standards. LIN is a single-wire bidirectional bus typically used for in-vehicle networks using data rates up to 20kbps. The TLIN4029A-Q1 is designed to support 12V LIN and 24V LIN applications with wider operating voltage and extended ±70V bus-fault protection.
The LIN receiver supports data rates up to 100kbps for faster in-line programming. The TLIN4029A-Q1 converts the data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or EN pin.
The TLIN4029A-Q1 integrates a resistor for LIN responder node applications, ESD protection, and fault protection which allow for a reduced amount of external components in the applications. The device prevents back-feed current through LIN to the supply input in case of a ground shift or supply voltage disconnection. The TLIN4029A-Q1 also includes undervoltage detection, temperature shutdown protection, and loss-of-ground protection.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TLIN4029A-Q1 Automotive LIN Transceiver with Dominant State Timeout and Extended Fault Protection datasheet | 2025. 8. 7 | ||
| Application brief | Automotive Smart Actuators | PDF | HTML | 2026. 5. 20 | ||
| 백서 | Design Considerations for 48V Automotive Body Motor Applications | PDF | HTML | 2026. 2. 17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDA-020101 — 차량용 48V 300W HVAC 펌프, 송풍기 및 팬 레퍼런스 설계
이 레퍼런스 설계는 48V, 300W 피크 스마트 모터 BLDC(브러시리스 직류) 구현을 보여줍니다. 개별 접근 방식을 통해 55mm 직경의 작고 콤팩트하며 유연한 폼 팩터를 구현할 수 있습니다. 이 설계는 100μA 미만의 저전력 절전 모드를 유지합니다. 이 설계는 효율적인 작동을 촉진하기 위해 TI 반도체를 활용합니다. 이 아키텍처는 높은 전력, 정밀도 및 소형화가 필요해 까다로운 차량용 HVAC(난방, 환기 및 공조) 애플리케이션을 위한 견고한 기반을 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON (DRB) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.