TLE2142

활성

듀얼 저잡음 고속 정밀 연산 증폭기

지금 주문하기

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.

OPA2992

활성

듀얼 40V, 11MHz, 레일 투 레일 입력 및 출력, 낮은 오프셋 전압 저잡음 연산 증폭기 Rail-to-rail I/O, higher GBW (10.6 MHz), lower offset voltage (1 mV), lower power (2.4 mA), lower noise (7 nV/√Hz), higher output current (65 mA), wider temp range (-40 to 125)

TLE2142

활성

지금 주문하기

제품 상세 정보

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Rail-to-rail

In to V-

GBW (typ) (MHz)

6

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

1.2

Iq per channel (typ) (mA)

3.45

Vn at 1 kHz (typ) (nV√Hz)

10.5

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Offset drift (typ) (µV/°C)

1.7

Features

High Cload Drive

Input bias current (max) (pA)

1500000

CMRR (typ) (dB)

108

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Rail-to-rail

In to V-

GBW (typ) (MHz)

6

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

1.2

Iq per channel (typ) (mA)

3.45

Vn at 1 kHz (typ) (nV√Hz)

10.5

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Offset drift (typ) (µV/°C)

1.7

Features

High Cload Drive

Input bias current (max) (pA)

1500000

CMRR (typ) (dB)

108

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

Low noise
- 10Hz . . . 15nV/√ Hz
- 1kHz . . . 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Low VIO: 500µV maximum at 25°C
Single or split supply: 4V to 44V
Fast settling time:
- 340ns to 0.1%
- 400ns to 0.01%
Saturation recovery: 150ns
Large output swing:
- VCC− + 0.1V to VCC+ − 1V

Low noise
- 10Hz . . . 15nV/√ Hz
- 1kHz . . . 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Low VIO: 500µV maximum at 25°C
Single or split supply: 4V to 44V
Fast settling time:
- 340ns to 0.1%
- 400ns to 0.01%
Saturation recovery: 150ns
Large output swing:
- VCC− + 0.1V to VCC+ − 1V

The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing.

Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from −40°C to 105°C, and M-suffix devices over the full military temperature range of −55°C to 125°C.

The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing.

Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from −40°C to 105°C, and M-suffix devices over the full military temperature range of −55°C to 125°C.

filter

기타 범용 연산 증폭기 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

3개 모두 보기

유형	직함	형식 옵션	날짜
e북	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	2017. 3. 28
애플리케이션 노트	TLE2141 and TLE2141-Q1 EMI Immunity Performance (Rev. B)		2015. 7. 1
애플리케이션 노트	Bipolar Voltage Outputs for the TLV56xx Family of DACs (Rev. A)		2015. 5. 18

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈

증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.

AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.