TL432
- Reference voltage tolerance at 25°C
- 0.5% (B grade)
- 1% (A grade)
- 2% (Standard grade)
- Adjustable output voltage: Vref to 36V
- Operation from −40°C to 125°C
- Typical temperature drift (TL43xB)
- 6mV (C temp)
- 14mV (I temp, Q temp)
- Low Output Noise
- 0.2Ω Typical output impedance
- Sink-current capability: 1mA to 100mA
The TL431 and TL432 devices are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and military temperature ranges. The output voltage can be set to any value between Vref (approximately 2.5V) and 36V, with two external resistors. These devices have a typical output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excellent replacements for Zener diodes in many applications, such as on-board regulation, adjustable power supplies, and switching power supplies. The TL432 device has exactly the same functionality and electrical specifications as the TL431 device, but has different pinouts for the DBV, DBZ, and PK packages.
Both the TL431 and TL432 devices are offered in three grades, with initial tolerances (at 25°C) of 0.5%, 1%, and 2%, for the B, A, and standard grade, respectively. In addition, low output drift versus temperature verifies good stability over the entire temperature range.
The TL43xxC devices are characterized for operation from 0°C to 70°C, the TL43xxI devices are characterized for operation from –40°C to 85°C, and the TL43xxQ devices are characterized for operation from –40°C to 125°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TL431, TL432 Precision Programmable Reference datasheet (Rev. S) | PDF | HTML | 2024. 5. 31 | |
| 애플리케이션 노트 | Precision Current Sources and Sinks Using Voltage References (Rev. A) | PDF | HTML | 2026. 4. 15 | ||
| e북 | Tips and tricks for designing with voltage references (Rev. A) | 2021. 5. 7 | |||
| 애플리케이션 노트 | Using the TL431 for Undervoltage and Overvoltage Detection (Rev. A) | 2019. 12. 11 | |||
| 선택 가이드 | 431 Device Nomenclature (Rev. B) | 2019. 9. 18 | |||
| 애플리케이션 노트 | Designing With the Improved TL431LI (Rev. A) | 2019. 6. 28 | |||
| e북 | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019. 6. 28 | |||
| 기술 문서 | Designing for isolated DC/DC converter shunt safety | PDF | HTML | 2015. 8. 29 | ||
| 애플리케이션 노트 | Understanding stability boundary conditions charts in TL431, TL432 Data sheet (Rev. A) | 2014. 1. 16 | |||
| 애플리케이션 노트 | Setting the shunt voltage on an adjustable shunt regulator | 2011. 9. 1 | |||
| 추가 자료 | SLL Precision Reference Product Clip | 2006. 2. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TL431 Family Unencrypted PSpice Transient and AC Model (Rev. B)
SHUNT-REFERENCE-CALC — Shunt Reference Selector and Design Calculator
TL431CALC — TL431 Design Calculator
The TL431CALC spreadsheet calculates all component parameters for any desired output voltage for the TL43x, TLV43x and TL1431. The spreadsheet includes limits for each device. Resistor values are calculated to the nearest 1% value.
PMP10737 — 역방향 전극 및 오토모티브 시스템용 과전압 보호 레퍼런스 디자인
PMP10737은 개별 부품을 사용하여 역방향 극성 및 과전압을 방지하는 레퍼런스 설계입니다. 입력 전압 범위는 25V에서 OVP를 지원하는 7V~35V입니다. LM74610은 충전 펌프로 N-채널 FET를 구동하여 바이패스 전류가 흐를 수 있는 저항 경로를 제공하는 배터리 역방향 보호에 사용됩니다.
PMP21697 — 오토모티브 오디오 증폭기를 위한 가변 전압 전력 컨버터 5~35V 300W 피크 레퍼런스 설계
PMP23463 — 300W 씬 프로필 LLC 레퍼런스 설계
이 레퍼런스 설계는 385V 입력을 수용하고 최대 13.5A 부하의 절연된 22.5V 출력을 생성하는 단일 구리 레이어 PCB(인쇄 회로 보드)의 하프 브리지 공진 컨버터를 보여줍니다. 이 설계는 95.76%의 피크 효율을 달성하는 UCC256603 하프 브리지 LLC 컨트롤러 및 UCC24612 동기 정류기(SR) 컨트롤러로 구성되어 있습니다. PMP23463은 무부하 상태에서 1% 미만의 출력 리플과 무부하-전부하 과도 상태에서 3% 미만의 출력 전압 편차를 달성합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
| SOT-23 (DBV) | 5 | Ultra Librarian |
| SOT-89 (PK) | 3 | Ultra Librarian |