TL1963A
- Input voltage range: 2.4V to 20V
- Output voltage range (adjustable): 1.21V to 20V
- Output voltage range (fixed):
- Legacy chip: 1.5V, 1.8V, 2.5V and 3.3V
- New chip: 1.8V, 3.3V
- Output accuracy (over line, load
and temperature):
- Legacy chip: ±3% (all packages)
- New chip:
- +3%/-2% (DCY only)
- ±1.5% (DCQ and KTT only)
- Maximum output current (IOUT): Up to 1.5A
- Dropout voltage: 340mV (typical) for IOUT = 1.5A
- Output capacitor for stable operation: ≥ 10µF with ESR ≤ 3Ω
- Low noise: 23µVRMS (10Hz to 100kHz) for VOUT = 1.21V
- Integrated fault protection:
- Reverse-current, thermal shutdown and overcurrent protection (both legacy and new chip)
- Reverse-battery protection (legacy chip only)
- Package:
- 4-pin SOT-223 (DCY)
- 6-pin SOT-223 (DCQ)
- 5-pin DDPAK/TO-263 (KTT)
The TL1963A-xx regulators are low-dropout (LDO) regulators provides a robust, easy-to-use power management design for wide variety of applications. The device can supply 1.5A of output current with a dropout voltage of 340mV (typical) and supports wide output range (from 1.21V to 20V) in adjustable configuration. In addition, TL1963A-xx also supports tighter output accuracy ±1.5% across line, load and temperature (for DCQ, KTT package of new chip), fast transient response, and low output noise (23µVRMS in unity-gain adjustable configuration), making it an excellent choice for sensitive RF supply applications.
The TL1963A-xx regulators are stable with output capacitor as low as 10µF and supports ESR range up-to 3Ω. The TL1963A-xx (both legacy chip and new chip) has built-in protection mechanism for over-current, over-temperature (thermal shutdown) and reverse-current protection for reliable operation of the LDO and the legacy chip of TL1963A-xx also includes reverse-battery protection.
The TL1963A-xx is available in a 6.50mm × 7.0mm, 4-pin SOT-223 (DCY) [only fixed], 6.50mm × 7.06mm, 6-pin SOT-223 (DCQ) and 10.16mm × 15.24mm, 5-pin DDPAK/TO-263 (KTT) package for fixed and adjustable outputs.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TL1963A 1.5A Low-Noise Fast-Transient-Response Low-Dropout Regulator datasheet (Rev. H) | PDF | HTML | 2026. 6. 24 | |
| 애플리케이션 노트 | An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) | PDF | HTML | 2025. 9. 23 | ||
| 애플리케이션 노트 | Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. D) | 2021. 4. 7 | |||
| 애플리케이션 노트 | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020. 8. 18 | ||
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 | |||
| e북 | LDO Basics (Rev. A) | 2019. 4. 8 | |||
| 애플리케이션 노트 | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017. 8. 9 | ||
| 기술 문서 | LDO basics: dropout | PDF | HTML | 2017. 3. 16 | ||
| 테스트 보고서 | TI Power Reference Design for Xilinx® Kintex®-7 (KC705) (Rev. A) | 2014. 12. 16 | |||
| 테스트 보고서 | TI Power Reference Design for Xilinx® Artix®-7 (AC701) | 2014. 5. 12 | |||
| 사용 설명서 | PMP7977 User's Guide | 2013. 9. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DDC2256AEVM — DDC2256A 256채널 전류 입력 아날로그-디지털 컨버터 평가 모듈
DDC2256AEVM 평가 모듈(EVM)은 256채널, 전류 입력, 24비트 아날로그-디지털(A/D) 컨버터인 DDC2256A의 평가 키트입니다. DUT 보드와 캡처 보드로 구성된 EVM 키트에는 DDC2256A 장치 2개, 장치 통신/구성용 FPGA, 임시 데이터 저장을 위한 36MB 메모리, PC에 연결하기 위한 USB 인터페이스가 포함되어 있습니다. 이 EVM에는 필요한 제어 신호와 온보드 전력 생성 기능이 모두 포함되어 있어 외부 장비의 필요성을 크게 줄여줍니다. 마지막으로, 이 평가 시스템에는 사용이 간편한 (...)
TL1963A-18EVM — TL1963A-18EVM 평가 모듈
The TL1963A-18EVM facilitates evaluation of the TL1963A-18 1.5A Low-Noise Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.
TL1963A-33EVM — TL1963A-33EVM 평가 모듈
The TL1963A-33EVM facilitates evaluation of the TL1963A-33 1.5A Low-Noise Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.
TL1963AEVM — TL1963AEVM 평가 모듈
The TL1963AEVM facilitates evaluation of the TL1963A 1.5A Low-Noise Fast-Transient-Response Low-Dropout Regulator. The EVM allows the user to apply different input voltage levels (2.5V to 20V) and different loads (0 to 1.5A) and check the regulated output voltage for stability.
PMP7977 — PMBus 전원 관리를 지원하는 Xilinx Artix 7 FPGA 레퍼런스 디자인
The Artix 7 power management reference design board uses power modules, linear regulators, and a PMBus compliant system controller to supply all required core and auxiliary voltages needed by the FPGA, including DDR memory termination. A Digital Power graphical user interface is used to monitor the (...)
TIDA-00306 — 그리드 애플리케이션용 구리-광섬유 100BASE-FX 또는 1000BASE-X 미디어 컨버터 레퍼런스 디자인
이 레퍼런스 디자인에서는 DP83849 평가 보드를 사용하여 구리선 기반 레거시 장비를 광 네트워크에 쉽게 연결할 수 있는 10/100BASE-TX-10/100BASE-FX 미디어 컨버터를 구현하는 방법론을 자세히 설명합니다. 구리 기반 이더넷(10/100BASE-TX)은 그리드 로컬 영역 네트워크에서 광범위하게 사용되고 있지만 통신 거리가 제한되어 있습니다. 광섬유 네트워킹은 잘 정립되어 있으며 지속적인 비용 절감 효과를 거두고 있습니다. 광섬유 네트워크를 사용하여 광역 장비를 관리하는 것은 실용적이고 비용 효율적이어서 더 빠른 (...)
TIDM-THREEPHASE-BLDC-LC — 3상 BLDC 및 PMSM 중간 전압 모터 제어 솔루션
센서리스 FOC(자속 기준 제어)를 사용하여 3상 BLDC(브러시리스 DC) 및 BLAC(브러시리스 AC) 모터 또는 PMSM(영구 자석 동기 모터)을 회전 및 제어합니다. 이 설계는 50V 미만, 7A 모터에 대한 전력 효율이 높고 경제적인 고성능 제어를 제공하며 의료용 펌프, 게이트, 리프트, 소형 펌프, 로봇 및 자동화와 같은 애플리케이션에 이상적입니다. 이 설계는 센서드 및 센서리스 사다리꼴 전류 모터 제어 기술도 지원합니다.
TIDM-THREEPHASE-BLDC-LC-INST — InstaSPIN 소프트웨어를 지원하는 3상 브러시리스/PMSM 저전류 모터 제어 솔루션
This reference design demonstrates a motor control solution for spinning medium voltage three-phase brushless DC (BLDC) and brushless AC (BLAC) motors- often referred to as permanent magnet synchronous motors (PMSM) - featuring the C2000™ InstaSPIN™ TMS320F28069M microcontroller and the DRV8312 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-223 (DCQ) | 6 | Ultra Librarian |
| TO-263 (KTT) | 5 | Ultra Librarian |
| SOT-223 (DCY) | 4 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.