홈 인터페이스 기타 인터페이스
홈
인터페이스
기타 인터페이스

TL16C750E

활성

128바이트 FIFO 및 자동 흐름 제어를 지원하는 단일 UART

지금 주문하기
데이터 시트

TL16C750E

활성
데이터 시트 지금 주문하기

제품 상세 정보

Protocols UART Rating Catalog Operating temperature range (°C) -40 to 105
Protocols UART Rating Catalog Operating temperature range (°C) -40 to 105
TQFP (PFB) 48 81 mm² (9 mm × 9 mm)
  • Supports wide supply voltage range of 1.62 V to 5.5 V
    • 6 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 3 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 2 Mbps (32-MHz oscillator input clock)
      at 3.3 V
    • 1.5 Mbps (24-MHz oscillator input clock)
      at 2.5 V
    • 1 Mbps (16-MHz oscillator Input clock)
      at 1.8 V
  • Characterized for operation from –40°C to 105°C
  • 128-byte transmit or receive FIFO
  • 6-bit fractional baud rate divider
  • Software-selectable baud-rate generator
  • Programmable and selectable transmit and Receive FIFO Trigger Levels for DMA, interrupt generation, and software or hardware flow control
  • Software/Hardware flow control
    • Programmable Xon and Xoff characters with optional Xon any character
    • Programmable Auto-RTS and Auto-CTS-modem control functions (CTS, RTS, DSR, DTR, RI, and CD)
  • DMA signaling capability for both received and transmitted data
  • RS-485 mode support
  • Infrared data association (IrDA) capability
  • Programmable sleep mode
  • Programmable serial interface characteristics
    • 5, 6, 7, or 8-bit characters with 1, 1.5, or 2 stop bit generation
    • Even, odd, or no parity bit generation and detection
  • False start bit and line break detection
  • Internal test and loopback capabilities
  • Supports wide supply voltage range of 1.62 V to 5.5 V
    • 6 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 3 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 2 Mbps (32-MHz oscillator input clock)
      at 3.3 V
    • 1.5 Mbps (24-MHz oscillator input clock)
      at 2.5 V
    • 1 Mbps (16-MHz oscillator Input clock)
      at 1.8 V
  • Characterized for operation from –40°C to 105°C
  • 128-byte transmit or receive FIFO
  • 6-bit fractional baud rate divider
  • Software-selectable baud-rate generator
  • Programmable and selectable transmit and Receive FIFO Trigger Levels for DMA, interrupt generation, and software or hardware flow control
  • Software/Hardware flow control
    • Programmable Xon and Xoff characters with optional Xon any character
    • Programmable Auto-RTS and Auto-CTS-modem control functions (CTS, RTS, DSR, DTR, RI, and CD)
  • DMA signaling capability for both received and transmitted data
  • RS-485 mode support
  • Infrared data association (IrDA) capability
  • Programmable sleep mode
  • Programmable serial interface characteristics
    • 5, 6, 7, or 8-bit characters with 1, 1.5, or 2 stop bit generation
    • Even, odd, or no parity bit generation and detection
  • False start bit and line break detection
  • Internal test and loopback capabilities

The TL16C750E is a single universal asynchronous receiver transmitter (UART) with 128-byte FIFOs, fractional baud rate support, automatic hardware, software flow control and data rates up to 6 Mbps. The device offers enhanced features such as fractional baud rate and a transmission character control register (TCR) that stores received FIFO threshold level to start or stop transmission during hardware and software flow control automatically without intervention from the CPU.

With the FIFO RDY register, the software gets the status of TXRDY or RXRDY, saving extra GPIO usage. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows onboard diagnostics. The TL16C750E incorporates the functionality of UART, the UART having its own register set and FIFO.

This version includes the Alternate Function Register (AFR) and this is used to enable some extra functionality beyond the capabilities of the TL16C750 version. One addition is the IrDA mode, which supports Standard IrDA (SIR) mode with baud rates from 2400 to 115.2 kbps. The third addition is support for RS-485 bus drivers or transceivers by providing an output pin (DTRx) per channel, which is timed to keep the RS-485 driver enabled as long as transmit data is pending.

Another name for the UART function is asynchronous communications element (ACE), and these terms are used interchangeably. The bulk of this document describes the behavior of each ACE, with the understanding that two such devices are incorporated into the TL16C750E device.

The TL16C750E is a single universal asynchronous receiver transmitter (UART) with 128-byte FIFOs, fractional baud rate support, automatic hardware, software flow control and data rates up to 6 Mbps. The device offers enhanced features such as fractional baud rate and a transmission character control register (TCR) that stores received FIFO threshold level to start or stop transmission during hardware and software flow control automatically without intervention from the CPU.

With the FIFO RDY register, the software gets the status of TXRDY or RXRDY, saving extra GPIO usage. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows onboard diagnostics. The TL16C750E incorporates the functionality of UART, the UART having its own register set and FIFO.

This version includes the Alternate Function Register (AFR) and this is used to enable some extra functionality beyond the capabilities of the TL16C750 version. One addition is the IrDA mode, which supports Standard IrDA (SIR) mode with baud rates from 2400 to 115.2 kbps. The third addition is support for RS-485 bus drivers or transceivers by providing an output pin (DTRx) per channel, which is timed to keep the RS-485 driver enabled as long as transmit data is pending.

Another name for the UART function is asynchronous communications element (ACE), and these terms are used interchangeably. The bulk of this document describes the behavior of each ACE, with the understanding that two such devices are incorporated into the TL16C750E device.
filter 기타 기타 인터페이스 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TL16C750E UART with 128-Byte FIFO datasheet PDF | HTML 2017. 5. 19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TL16C750EEVM — TL16C750E 128바이트 FIFO 분수 보 레이트 UART 평가 모듈

이 EVM은 사용자에게 TL16C750E 장치와 해당 기능을 평가할 수 있는 기능을 제공합니다. EVM에는 온보드 3.3V LDO와 더 높은 전압 레일에서 작동하는 프로세서를 위한 레벨 변환이 포함되어 있습니다.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
TQFP (PFB) 48 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상