TIOL221
- 7V to 36V supply voltage
- IO-link configurable CQ output with auxiliary digital output (DO) and digital input (DI) channels
- Configurable by pin-control or SPI
- Both CQ and DO channels configurable for use in IO-link main modules
- PNP, NPN or IO-Link configurable CQ output
- IEC 61131-9 COM1, COM2 and COM3 Data Rate Support
- Supports extended cable length to ≥60 meters
- Output drivers with low power
dissipation and high configurability
- Low RDSON 2.5Ω (typical)
- Active driver current limiting capability
- Configurable driver overcurrent limit:50mA to 500mA
- Active reverse polarity protection of up to 65V on LP, CQ, DO and DI
- Safe and fast demagnetization of inductive loads
- Integrated protection features
for robust systems
- Fault indicator for overcurrent, overtemperature and UVLO faults
- Extended ambient temperature operation:–40°C to 125°C
- ±8kV IEC 61000-4-2 ESD contact discharge
- ±4kV IEC 61000-4-4 electrical fast transient
- ±1.2kV, 500Ω IEC 61000-4-5 surge
- Large capacitive and inductive load driving capability
- Integrated LDO provides up to 20mA current
- Optional external regulator input (5V) to reduce internal power dissipation in the LDO
- Small space-saving package
options
- 4mm × 4mm VQFN package
- 2.7mm × 2.7mm DSBGA package
The TIOL221 transceiver integrates dual low-power output drivers with active reverse polarity protection. When the device is connected to an IO-Link master through a three-wire interface, the controller can initiate communication, and exchange data with the remote node while the TIOL221 acts as a complete physical layer for the communication. The device also integrates an auxiliary DI channel.
The device is capable of withstanding up to 1.2kV (500Ω) of IEC 61000-4-5 surge and features integrated reverse polarity protection. In addition to the SPI for configurability and expanded diagnostic capability, a simple pin-programmable interface allows easy interfacing with the controller circuits. The output current limit can be configured using either an external resistor or per-configured limits via SPI. TIOL221 can be configured to generate wake-up pulse, and be used in IO-link master applications. Fault reporting and internal protection functions are provided for undervoltage, overcurrent and overtemperature conditions.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TIOL221 Dual Channel IO-Link Device PHY With Integrated LDO and SPI datasheet (Rev. C) | PDF | HTML | 2025. 12. 16 | ||
| Application brief | How Are IO-Link Solutions Enabling Smarter Factories? | PDF | HTML | 2025. 6. 11 | |||
| 인증서 | TIOL221EVM EU Declaration of Conformity (DoC) | PDF | HTML | 2024. 8. 26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIOL221EVM — TIOL221 평가 모듈
TIDA-011002 — 비용 효율적 IO-Link 마스터 모듈 레퍼런스 설계
이 레퍼런스 설계는 최대 400μs의 사이클 시간, COM3, L+에서 포트당 1A, 추가 DI/DO를 지원하는 8포트 IO-Link 게이트웨이를 구현하여 IO-Link 컨트롤러 게이트웨이 개발 속도를 높여 줍니다. 이 설계는 AM261x 통합형 ICSS(산업 통신 서브시스템)를 사용해 EtherCAT®, PROFINET®, EtherNet/IP, Modbus® TCP(전송 제어 프로토콜)와 같은 다양한 이더넷 기반 산업용 프로토콜을 지원합니다. 하드웨어 설계는 업계 표준 EMI/EMC 요구 사항에 부합하도록 개발하고 테스트를 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
| DSBGA (YAH) | 25 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.