데이터 시트
TICS100MOD
- Multi-Protocol Industrial Ethernet Support
- EtherCAT
- PROFINET
- EtherNet/IP
- Dual-Port 10/100 Mbps Ethernet
- Two 10/100 Mbps Ethernet ports (optimized for EtherCAT)
- IEEE 802.3 compliant
- High-Performance Processor
- 500 MHz dual-core Arm Cortex-R5F MCU with real-time control, safety and security
- Hardware acceleration for real-time protocols (PRU-ICSS)
- Low latency communication
- Single Supply
- 3.3V ±10% single supply operation
- CORE_EN pin for module enable
- Host Interfaces
- QSPI (PRU-based), max clock 27 MHz
- SPI
- host interrupt lines
- Industrial Design
- Extended temperature range: -40°C to +85°C
- Pre-certified module approach
- Compact 30 mm × 18 mm footprint
이 제품에 사용할 수 있는 세부 정보가 없습니다.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TICS100MOD Multi-Protocol Industrial Communication Module datasheet | PDF | HTML | 2026. 10. 25 | |
| Application brief | Accelerating Industrial Connectivity: Simplifying Multiprotocol Ethernet Integration with TICS100MOD | PDF | HTML | 2026. 11. 4 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TICS100MOD-EVM — TICS100MOD carrier and development board evaluation module
The TICS100MOD evaluation module (EVM) consists of two boards: the carrier board and the development board. The carrier board contains the TICS100MOD, the Ethernet connector and configuration headers. The development board provides the power input, a USB-to-UART bridge, the host interface, and the (...)
소프트웨어 개발 키트(SDK)
TICS100MOD-SDK — TICS100MOD software development kit (SDK)
The TICS100MOD software development kit (SDK) provides all tools, firmware and sources needed to build TICS100MOD based products.
IDE, 구성, 컴파일러 또는 디버거
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is an integrated development environment designed for Texas Instruments' embedded processors, available as both a desktop and cloud-based application. It is an integral part of TI's extensive CCStudio™ development ecosystem.
CCStudio IDE is built on Eclipse Theia™ framework, the (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| NOPKG (0) | — | Ultra Librarian |