TIC10024-Q1
- Qualified for automotive applications
- AEC-Q100 Qualified with the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature
- Device HBM ESD classification level H2
- Device CDM ESD classification level C4B
- Functional Safety-Capable
- Designed to support 12-V automotive systems with over-voltage and under-voltage warning
- Monitors up to 24 direct switch inputs with 10 inputs configurable to monitor switches connected to either ground or battery
- Switch input withstands up to 40 V (load dump condition) and down to –24 V (reverse polarity condition)
- 6 Configurable wetting current settings: (0 mA, 1 mA, 2 mA, 5 mA, 10 mA, and 15 mA)
- Integrated comparator with 4 programmable thresholds for digital switch monitoring
- Ultra-low operating current in polling mode: 68 µA typical (tPOLL = 64 ms, tPOLL_ACT = 128 µs, all 24 inputs active, comparator mode, all switches open)
- Interfaces directly to MCU using 3.3 V / 5 V serial peripheral interface (SPI) protocol
- Interrupt generation to support wake-up operation on all inputs
- ±8 kV Contact discharge ESD protection on input pins per ISO-10605 with appropriate external components
- 38-Pin TSSOP package
The TIC10024-Q1 is an advanced Multiple Switch Detection Interface (MSDI) device designed to detect external switch status in a 12-V automotive system. The TIC10024-Q1 features a comparator with adjustable thresholds to monitor digital switches independently of the MCU. The device monitors 24 direct switch inputs, with 10 inputs configurable to monitor switches connected to either ground or battery. There are 6 unique wetting current settings that can be programmed for each input to support different application scenarios. The device supports wake-up operation on all switch inputs to eliminate the need to keep the MCU active continuously, thus reducing power consumption of the system. The TIC10024-Q1 also offers integrated fault detection and ESD protection for improved system robustness. The TIC10024-Q1 supports 2 modes of operations: continuous and polling mode. In continuous mode, wetting current is supplied continuously. In polling mode, wetting current is turned on periodically to sample the input status based on a programmable timer, thus the system power consumption is significantly reduced.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TIC10024-Q1 24-Input Multiple Switch Detection Interface (MSDI) Device With Adjustable Wetting Current for Automotive Systems datasheet (Rev. A) | PDF | HTML | 2022. 2. 9 | |
| 기능 안전 정보 | TIC12400-Q1, TIC10024-Q1 Functional Safety, FIT Rate, Failure Mode Distribution | PDF | HTML | 2021. 8. 12 | ||
| 기술 문서 | Body control module resources to make your design more efficient and reliable | PDF | HTML | 2020. 10. 30 | ||
| 애플리케이션 노트 | Steps to Configure TIC12400-Q1 Multiple Switch Detection Interface (MSDI) | 2019. 4. 7 | |||
| 테스트 보고서 | TIC12400-Q1 and TIC10024-Q1 ISO-10605 ESD Test Report | 2017. 11. 27 | |||
| 기술 문서 | Body control modules – invisible but fundamental for every car | PDF | HTML | 2017. 10. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIC12400EVM-KIT — TIC12400-Q1 24입력 다중 스위치 감지 인터페이스용 평가 모듈 키트
TIDA-01237 — 차량용 멀티 스위치 감지 인터페이스(MSDI) 레퍼런스 디자인
이 레퍼런스 설계는 다중 스위치 감지 인터페이스(MSDI) 장치를 사용하여 다양한 고전압(HV) 스위치 입력을 처리하는 방법의 구현 예시를 보여줍니다. 이 사용 설명서는 차체 제어 모듈(BCM), 면판 및 상단탑 컬럼 모듈(TCM) 애플리케이션을 위한 HV 스위치 입력을 처리하는 MSDI 장치의 실제 사례를 제공합니다. 또한 이 설계는 고정 3.3V 마이크로컨트롤러 공급 전압을 생성하기 위해 와이드 V IN 저손실(LDO) 레귤레이터를 활용합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DCP) | 38 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.