THVD9491-SEP
Radiation-tolerant, 3V to 5.5V RS-485 transceiver with flexible I/O supply and IEC ESD
THVD9491-SEP
- VID V62/24626
- Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
- Total ionizing dose (TID) characterized up to 30krad (Si)
- Total ionizing dose radiation lot acceptance testing (TID RLAT) for every wafer lot to 30krad (Si)
- Single-event effects (SEE)
characterized
- Single event latch-up (SEL) immune to linear energy transfer (LET) = 43MeV⋅cm2 /mg at 125°C
- Space enhanced plastic (Space
EP)
- Controlled baseline
- One assembly and test site
- One fabrication site
- Gold bond wire
- NiPdAu lead finish
- Military temp range (-55°C to 125°C)
- Extended product life cycle
- Product traceability
- Meets the NASA ASTM E595 outgassing specification
- 3V to 5.5V supply voltage
- 1.65V to 5.5V Supply for data and enable signals
- SLR Pin Selectable Data Rates:
- 20Mbps and 50Mbps
- Bus I/O protection
- ±40V DC bus fault
- ±16kV HBM ESD
- ±8kV IEC 61000-4-2 contact discharge
- ±4kV IEC 61000-4-4 fast transient burst
- Symmetric common mode range: ±12V
- Enhanced receiver hysteresis for noise immunity
- Glitch-free power-up or down for hot plug-in capability
- Open, short, and idle bus failsafe
- 1/8 unit load (up to 256 bus nodes)
- Leaded 14-pin SOIC package
THVD9491-SEP is a space enhanced, ±40V fault-protected full-duplex RS-422/RS-485 transceiver using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. The device has a slew rate select feature that enables the use at two maximum speeds based on the SLR pin setting.
The device features integrated IEC ESD protection, eliminating the need for external system-level protection components. The ±12V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.
THVD9491-SEP device is available in a standard 14-pin SOIC package.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | THVD9491-SEP Radiation Tolerant 3V to 5.5V RS-485 Transceiver with Flexible I/O Supply and IEC ESD Protection datasheet (Rev. C) | PDF | HTML | 2025. 9. 4 | |
| * | 방사능 및 안정성 보고서 | THVD9491-SEP SEE Radiation Report (Rev. A) | PDF | HTML | 2025. 4. 1 | |
| * | 방사능 및 안정성 보고서 | THVD9491-SEP Production Flow and Reliability Report | PDF | HTML | 2025. 1. 2 | |
| * | 방사능 및 안정성 보고서 | THVD9491-SEP Total Ionizing Dose (TID) Report | PDF | HTML | 2025. 1. 2 | |
| * | VID | THVD9491-SEP VID THVD9491-SEP VIP V62-24626 | 2025. 7. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
THVD24X2VEVM — THVD24X2V 부품 제품군 EVM(평가 모듈)
TIDA-011004 — 우주 항공 등급 3U VPX 전원 공급 장치 모듈 레퍼런스 설계
이 레퍼런스 설계는 우주 항공 등급 3U VPX 아키텍처용 VITA-62 표준을 준수하는 우주 항공 등급 전원 공급 장치 모듈입니다. Space VPX 표준은 다양한 미션 프로필에 사용할 수 있는 모듈형·확장형 시스템 프레임워크를 정의함으로써 표준화와 상호운용성을 지원합니다. 이 레퍼런스 설계는 소형 폼팩터로 구현된 동시에 전반적으로 높은 성능을 유지합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 14 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.