THS4531
- Ultra Low Power:
- Voltage: 2.5 V to 5.5 V
- Current: 250 µA
- Power-Down Mode: 0.5 µA (typical)
- Fully-Differential Architecture
- Bandwidth: 36 MHz
- Slew Rate: 200 V/µs
- THD: –120 dBc at 1 kHz (1 VRMS, RL= 2 kΩ)
- Input Voltage Noise: 10 nV/√Hz (f = 1 kHz)
- High DC
Accuracy:
- VOS Drift: ±4 µV/˚C (–40°C to +125°C)
- AOL: 114 dB
- Rail-to-Rail Output (RRO)
- Negative Rail Input (NRI)
- Output Common-Mode Control
The THS4531 is a low-power, fully-differential op amp with input common-mode range below the negative rail and rail-to-rail output. The device is designed for low-power data acquisition systems and high density applications where power consumption and dissipation is critical.
The device features accurate output common-mode control that allows for dc coupling when driving analog-to-digital converters (ADCs). This control, coupled with the input common-mode range below the negative rail and rail-to-rail output, allows for easy interface from single-ended ground-referenced signal sources to successive-approximation registers (SARs), and delta-sigma (ΔΣ) ADCs using only single-supply 2.5 V to 5 V power. The THS4531 is also a valuable tool for general-purpose, low-power differential signal conditioning applications.
The THS4531 is characterized for operation over the extended industrial temperature range from –40°C to +125°C. The following package options are available:
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
THS4531DGKEVM — DGK 패키지의 THS4531 평가 모듈
The THS4531DGKEVM is designed to quickly and easily demonstrate the functionality and versatility of the amplifier. The EVM is ready to connect to power, signal source, and test instruments through the use of on-board connectors. The default amplifier configuration is single-ended input, (...)
SBOR022 — TI FDA Calculator
TIDA-00201 — 플럭스 게이트 센서를 사용한 전류 및 전압 측정을 위한 차동 신호 조절 회로
This design provides a 4-channel signal conditioning solution for differential ADCs integrated into a microcontroller measuring motor current using fluxgate sensors. Also provided is an alternative measurement circuit with external differential SAR ADCs as well as circuits for high-speed (...)
TIDA-00499 — 차동 증폭기 및 HS ADC를 사용하는 과도현상 및 디지털 고장 레코더 AFE 레퍼런스 디자인
DFR(디지털 고장 레코더)는 60/50Hz에서 17/20μs의 과도현상을 감지할 수 있지만, 과도 현상 레코더는 마이크로초 이내에 정점을 찍고 사라지는 교란을 포착합니다. 이 레퍼런스 디자인은 DFR의 경우 최대 1MHz, 과도현상 테코더의 경우 25MHz에서 과도 입력을 캡처하는 방법을 보여줍니다. 고속 컨버터를 구동하는 차동 증폭기를 사용하여 애플리케이션 요구 사항(12비트~14비트 해상도)에 따라 다양한 해상도로 양극 및 음극 과도 상태(<=2kV 피크)를 캡처할 수 있습니다.
TIDA-01012 — 무선 IoT, Bluetooth® 저에너지, 4½ 자리, 100khz True RMS 디지털 멀티미터
TIDA-01014 — 저전력 산업용 IoT 필드 측정을 위한 고정밀 배터리 연료 게이지 레퍼런스 디자인
IoT(사물 인터넷) 혁신은 애플리케이션과 기기를 효율적으로 연결하여 배터리로 구동되는 광범위한 초저전력 센서 배포를 가능하게 했습니다. TI의 첨단 센서 및 저전력 연결 장치와 같은 새로운 기술을 통해 배터리 구동 무선 시스템으로 이러한 기기를 설계할 수 있어 비용, 배포, 안정성, 성능 및 복잡성이 획기적으로 개선되고 있습니다.
텍사스 인스트루먼트의 SimpleLink™ 초저전력 무선 MCU(마이크로컨트롤러) 플랫폼을 사용하는 TIDA-01014 레퍼런스 설계는 TIDA-01012 무선 DMM 레퍼런스 설계를 활용하며, (...)
TIPD117 — 광학 인코더용 듀얼 채널 데이터 수집 시스템, 12비트, 1MSPS
This TI Precision Verified Design provides the theory, component selection, simulation, PCB design, and measurement details for a 12-bit 1-MSPS single supply dual channel simultaneous data acquisition system. This circuit achieves 73 dB SINAD for a 4.5 V differential signal at 2 KHz input (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RUN) | 10 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |