THS3095

활성

전원 차단 기능이 있는 단일, 고전압 저왜곡 전류 피드백 연산 증폭기

제품 상세 정보

Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 32 GBW (typ) (MHz) 305 BW at Acl (MHz) 715 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6000 Vn at flatband (typ) (nV√Hz) 1.1 Vn at 1 kHz (typ) (nV√Hz) 1.3 Iq per channel (typ) (mA) 9.5 Vos (offset voltage at 25°C) (max) (mV) 2 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 78 Input bias current (max) (pA) 15000000 Offset drift (typ) (µV/°C) 19 Iout (typ) (mA) 310 2nd harmonic (dBc) 84 3rd harmonic (dBc) 99 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 32 GBW (typ) (MHz) 305 BW at Acl (MHz) 715 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6000 Vn at flatband (typ) (nV√Hz) 1.1 Vn at 1 kHz (typ) (nV√Hz) 1.3 Iq per channel (typ) (mA) 9.5 Vos (offset voltage at 25°C) (max) (mV) 2 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 78 Input bias current (max) (pA) 15000000 Offset drift (typ) (µV/°C) 19 Iout (typ) (mA) 310 2nd harmonic (dBc) 84 3rd harmonic (dBc) 99 Frequency of harmonic distortion measurement (MHz) 10
HSOIC (DDA) 8 29.4 mm² (4.9 mm × 6 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Low distortion:
    • 84-dBc HD2 at 10 MHz, R L = 1 kΩ
    • 99-dBc HD3 at 10 MHz, R L = 1 kΩ
  • Low noise:
    • 15-pA/√ Hz noninverting current noise
    • 14-pA/√ Hz inverting current noise
    • 1.1-nV/√ Hz voltage noise
  • High slew rate: 6000 V/µs (G = 5, V O = 20 V PP)
  • Wide bandwidth: 305 MHz (G = 2, R L = 100 Ω)
  • High output current drive: ±310 mA
  • Wide supply range: ±5 V to ±16 V
  • Power-down feature: THS3095 only
  • Low distortion:
    • 84-dBc HD2 at 10 MHz, R L = 1 kΩ
    • 99-dBc HD3 at 10 MHz, R L = 1 kΩ
  • Low noise:
    • 15-pA/√ Hz noninverting current noise
    • 14-pA/√ Hz inverting current noise
    • 1.1-nV/√ Hz voltage noise
  • High slew rate: 6000 V/µs (G = 5, V O = 20 V PP)
  • Wide bandwidth: 305 MHz (G = 2, R L = 100 Ω)
  • High output current drive: ±310 mA
  • Wide supply range: ±5 V to ±16 V
  • Power-down feature: THS3095 only

The THS3091 and THS3095 (THS309x) are high-voltage, low-distortion, high-speed, current-feedback amplifiers that operate over a wide supply range of ±5 V to ±16 V. These devices are an excellent choice for applications that require large, linear output signals, such as pin drivers, power-FET drivers, and arbitrary waveform generators.

The THS3095 features a power-down pin ( PD) that puts the amplifier into a low-power standby mode, and lowers the quiescent current from 9.5 mA to 500 µA.

The wide, 32‑V supply range, 6000‑V/µs slew-rate, and 310‑mA output current drive make the THS309x an excellent choice for high-voltage arbitrary-waveform-driver applications. Moreover, with the ability to handle large voltage swings driving into low-resistance and high-capacitance loads while maintaining good settling time performance, these devices are an excellent choice for pin-driver and power-FET driver applications.

The THS309x are offered in an 8‑pin SOIC (DDA) PowerPAD™ integrated circuit package. The THS3091 is also offered in an 8‑pin HVSSOP (DGN) package.

The THS3091 and THS3095 (THS309x) are high-voltage, low-distortion, high-speed, current-feedback amplifiers that operate over a wide supply range of ±5 V to ±16 V. These devices are an excellent choice for applications that require large, linear output signals, such as pin drivers, power-FET drivers, and arbitrary waveform generators.

The THS3095 features a power-down pin ( PD) that puts the amplifier into a low-power standby mode, and lowers the quiescent current from 9.5 mA to 500 µA.

The wide, 32‑V supply range, 6000‑V/µs slew-rate, and 310‑mA output current drive make the THS309x an excellent choice for high-voltage arbitrary-waveform-driver applications. Moreover, with the ability to handle large voltage swings driving into low-resistance and high-capacitance loads while maintaining good settling time performance, these devices are an excellent choice for pin-driver and power-FET driver applications.

The THS309x are offered in an 8‑pin SOIC (DDA) PowerPAD™ integrated circuit package. The THS3091 is also offered in an 8‑pin HVSSOP (DGN) package.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
THS3491 활성 900MHz 고전력 출력 전류 피드백 증폭기 This device is a current feedback amplifier with higher bandwidth (900MHz) and higher output current drive (420mA)

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
14개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 THS309x High-Voltage, Low-Distortion, Current-Feedback Operational Amplifiers datasheet (Rev. K) PDF | HTML 2023. 4. 17
기술 문서 3 common questions when designing with high-speed amplifiers PDF | HTML 2020. 7. 17
아날로그 디자인 학술지 Q3 2009 Issue Analog Applications Journal 2018. 9. 24
아날로그 디자인 학술지 Q4 2009 Issue Analog Applications Journal 2018. 9. 24
e북 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017. 3. 28
애플리케이션 노트 Design for a Wideband Differential Transimpedance DAC Output (Rev. A) 2016. 10. 17
설계 가이드 Wide-Bandwidth and High-Voltage Arbitrary Waveform Generator Front End 2013. 9. 3
추가 자료 600-mA Fully Integrated Step-Down Solution: Compact Power - TPS82671 (Rev. A) 2011. 1. 20
애플리케이션 노트 Design of Differential Filters for High-Speed Signal Chains (Rev. B) 2010. 4. 30
아날로그 디자인 학술지 Interfacing op amps to high-speed DACs, Part 2: Current-sourcing DACs 2009. 10. 4
아날로그 디자인 학술지 Interfacing op amps to high-speed DACs, Part 1: Current-sinking DACs 2009. 7. 14
아날로그 디자인 학술지 Designing for low distortion with high-speed op amps 2005. 3. 2
애플리케이션 노트 Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance 2004. 4. 28
애플리케이션 노트 Voltage Feedback vs. Current Feedback Op Amps 1998. 11. 30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

THS3095EVM — 전원 차단 기능이 있는 단일, 고전압 저왜곡 연산 증폭기를 위한 THS3095 평가 모듈

THS3095 평가 모듈(EVM)은 THS3095 고전압, 저왜곡, 고속, 전류 피드백 증폭기를 평가할 수 있는 플랫폼을 제공합니다. EVM을 작동하는 데 전원, 입력 신호 및 테스트 기기만 있으면 됩니다.

애플리케이션:

  • 고전압 임의 파형
  • 전력 FET 드라이버
  • 핀 드라이버
  • VDSL 라인 드라이버
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

THS3095 PSpice Model (Rev. A)

SLOM143A.ZIP (84 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

THS3095 TINA-TI Reference Design (Rev. A)

SLOM145A.TSC (17 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

THS3095 TINA-TI Spice Model (Rev. A)

SLOM144A.ZIP (5 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-00075 — 광대역 및 고전압 임의 파형 제너레이터 프론트 엔드

이 디자인은 DAC5682Z의 전류 싱크 출력과 액티브 인터페이스를 사용하는 방법을 보여줍니다. 이를 위한 일반적인 애플리케이션으로는 임의 파형 제너레이터용 프론트 엔드가 있습니다. EVM에는 디지털-아날로그 변환을 위한 DAC5682Z, 광대역 연산 증폭기를 사용하여 액티브 인터페이스 구현을 시연하기 위한 OPA695와 THS3091 및 THS3095가 포함되어 있어 넓은 전압 스윙을 지원하는 연산 증폭기를 표시합니다. 또한 보드에 클록 생성을 위한 CDCM7005, VCXO 및 레퍼런스와 전압 조정을 위한 선형 레귤레이터가 (...)

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-01486 — 초음파 유량 트랜스미터 레퍼런스 설계

이 레퍼런스 설계는 공정 산업에서 사용되는 대형 파이프의 유량을 측정할 수 있는 초음파 유량 트랜스미터를 갖추고 있습니다. 이 레퍼런스 설계는 최대 2MHz ±12V 펄스의 4가지 피에조 변환기를 구동하고, 최대 50dB까지 수신되는 초음파 신호를 증폭할 수 있습니다.

이 레퍼런스 설계는 고속 ADC 기반 신호 수집을 지원하는 통합 USS(초음파 센서 솔루션) 모듈과 통합 LEA(저에너지 가속기) 모듈을 사용하여 초저전력으로 고정밀 계량 솔루션을 제공하는 MSP430FR6047 MCU(마이크로컨트롤러)를 활용합니다.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
HSOIC (DDA) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상