THP210

활성

높은 정밀도(40μV, 0.1μV/C), 고전압(36V), 저잡음(3.7nV/√Hz), 완전 차동 증폭기

제품 상세 정보

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 0.04 Offset drift (typ) (µV/°C) 0.1 Input bias current (max) (pA) 2000 GBW (typ) (MHz) 9.2 Features Super Beta Slew rate (typ) (V/µs) 15 Rail-to-rail No Iq per channel (typ) (mA) 0.95 Vn at 1 kHz (typ) (nV√Hz) 3.7 CMRR (typ) (dB) 140 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.031 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 1 Input common mode headroom (to positive supply) (typ) (V) -1 Output swing headroom (to negative supply) (typ) (V) 0.1 Output swing headroom (to positive supply) (typ) (V) -0.1 THD + N at 1 kHz (typ) (%) 0.0001
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 0.04 Offset drift (typ) (µV/°C) 0.1 Input bias current (max) (pA) 2000 GBW (typ) (MHz) 9.2 Features Super Beta Slew rate (typ) (V/µs) 15 Rail-to-rail No Iq per channel (typ) (mA) 0.95 Vn at 1 kHz (typ) (nV√Hz) 3.7 CMRR (typ) (dB) 140 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.031 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 1 Input common mode headroom (to positive supply) (typ) (V) -1 Output swing headroom (to negative supply) (typ) (V) 0.1 Output swing headroom (to positive supply) (typ) (V) -0.1 THD + N at 1 kHz (typ) (%) 0.0001
VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Input offset voltage: ±40 µV (maximum)
  • Input offset voltage drift: 0.35 µV/°C (maximum)
  • Low supply current: 950 µA at ±18 V
  • Low input bias current: 2 nA (maximum)
  • Low input bias current drift: 15 pA/°C (maximum)
  • Gain-bandwidth product: 9.2 MHz
  • Differential output slew rate: 15 V/µs
  • Low input voltage noise: 3.7 nV/√ Hz at 1 kHz
  • Low THD + N: –120 dB at 10 kHz
  • Wide input and output common-mode range
  • Wide single-supply operating range: 3 V to 36 V
  • Low supply current power-down feature: < 20 µA
  • Overload power limit
  • Current limit
  • Package: 8-pin VSSOP, 8-pin SOIC
  • Temperature range: –40°C to +125°C
  • Input offset voltage: ±40 µV (maximum)
  • Input offset voltage drift: 0.35 µV/°C (maximum)
  • Low supply current: 950 µA at ±18 V
  • Low input bias current: 2 nA (maximum)
  • Low input bias current drift: 15 pA/°C (maximum)
  • Gain-bandwidth product: 9.2 MHz
  • Differential output slew rate: 15 V/µs
  • Low input voltage noise: 3.7 nV/√ Hz at 1 kHz
  • Low THD + N: –120 dB at 10 kHz
  • Wide input and output common-mode range
  • Wide single-supply operating range: 3 V to 36 V
  • Low supply current power-down feature: < 20 µA
  • Overload power limit
  • Current limit
  • Package: 8-pin VSSOP, 8-pin SOIC
  • Temperature range: –40°C to +125°C

The THP210 is an ultra-low-offset, low-noise, high-voltage, precision, fully differential amplifier that easily filters and drives fully differential signal chains. The THP210 is also used to convert single-ended sources to differential outputs as required by high-resolution analog-to-digital converters (ADCs). Designed for exceptional offset, low noise and THD, the bipolar super-beta inputs yield a very-low noise figure at very-low quiescent current and input bias current. This device is designed for signal conditioning circuits where low power offset and power consumption are required, along with excellent signal-to-noise ratio (SNR).

The THP210 features high-voltage supply capability, allowing for supply voltages up to ±18 V. This capability allows high-voltage differential signal chains to benefit from the improved headroom and dynamic range without adding separate amplifiers for each polarity of the differential signal. Very-low voltage and current noise enables the THP210 for use in high-gain configurations with minimal impact to the signal fidelity.

The THP210 is an ultra-low-offset, low-noise, high-voltage, precision, fully differential amplifier that easily filters and drives fully differential signal chains. The THP210 is also used to convert single-ended sources to differential outputs as required by high-resolution analog-to-digital converters (ADCs). Designed for exceptional offset, low noise and THD, the bipolar super-beta inputs yield a very-low noise figure at very-low quiescent current and input bias current. This device is designed for signal conditioning circuits where low power offset and power consumption are required, along with excellent signal-to-noise ratio (SNR).

The THP210 features high-voltage supply capability, allowing for supply voltages up to ±18 V. This capability allows high-voltage differential signal chains to benefit from the improved headroom and dynamic range without adding separate amplifiers for each polarity of the differential signal. Very-low voltage and current noise enables the THP210 for use in high-gain configurations with minimal impact to the signal fidelity.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
OPA1637 활성 하이파이, 고전압(36V), 저잡음(3.7nV/rtHz) Burr-Brown™ 오디오 완전 차동 증폭기 Lower distortion differential amplifier
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
INA851 활성 OVP(±40V)를 지원하는 저잡음(3.2nV/√Hz) 고속(22MHz) 완전 차동 계측 증폭기 Fully differential instrumention amplifier with high-input impedance, overvoltage protection (±60 V) and attenuation gain.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 THP210 Ultra-Low Offset, High-Voltage, Low-Noise, Precision, Fully-Differential Amplifier datasheet (Rev. C) PDF | HTML 2021. 2. 22
Product overview PLC Analog Input Front-End Architectures PDF | HTML 2022. 7. 31
Application brief THP210 and ADS127L11 Performance PDF | HTML 2022. 3. 28
기술 문서 Why precision matters with fully differential amplifiers PDF | HTML 2021. 2. 10
애플리케이션 노트 Optimizing Noise and Power with Super Beta-Fully Differential Amplifiers PDF | HTML 2020. 12. 7
Application brief How to Select Precision Amplifiers for Semiconductor Testers (Rev. A) PDF | HTML 2020. 12. 3
인증서 THP210EVM EU Declaration of Conformity (DoC) 2020. 6. 25

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈

증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.

AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.

  • D(SOIC-8 및 SOIC-14)
  • PW(TSSOP-14)
  • DGK(VSSOP-8)
  • (...)
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
평가 보드

THP210EVM — THP210 평가 모듈

THP210EVM은 고정밀, 고전압, 저잡음, 완전 차동 증폭기로, 고정밀 ADC(아날로그-디지털 컨버터)에 필요한 차동 출력과 손쉽게 상호 작용시킬 수 있습니다. 이 EVM은 기능에 대한 액세스를 제공하고 THP210의 성능을 측정하도록 설계되었습니다.
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

THP210 PSpice Model (Rev. A)

SBOMBB9A.ZIP (25 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

THP210 TINA-TI Reference Design (Rev. A)

SBOMB85A (134 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

THP210 TINA-TI SPICE Model (Rev. A)

SBOMB88A.ZIP (14 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
계산 툴

DIFFAMPGAINCALC — Fully Differential Operational Amplifier Gain Calculator

This folder contains a gain calculator and a component calculator for fully differential operational amplifiers.

지원되는 제품 및 하드웨어
계산 툴

OPAMP-NOISECALC — Noise Calculator

This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:

  • A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
지원되는 제품 및 하드웨어
계산 툴

SBOR022 — TI FDA Calculator

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-010970 — 저잡음, 높은 선형 디지털 멀티미터 및 데이터 수집 신호 체인 레퍼런스 설계

이 설계의 대상 애플리케이션에는 DC 신호를 초고정밀도로 측정해야 하는 DMM(디지털 멀티미터)이 포함됩니다. 이 설계는 높은 유효 선형성을 갖춘 고성능 24비트 ADC(아날로그-디지털 컨버터)인 ADS127L21B를 사용하여 우수한 DC 정확도를 달성합니다. 초저 드리프트 매립형 제너 레퍼런스인 REF81이 게인 및 오프셋 오류를 제거하기 위해 신호 체인을 보정합니다.

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VSSOP (DGK) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상