TDES9640

활성

고속 센서용 7.55Gbps MIPI® CSI-2 V³Link™ 시리얼라이저 쿼드 허브

지금 주문하기

데이터 시트

document-pdfAcrobat TDES9640 V3LinkTMDeserializer Hub With CSI-2 Output Ports for 8-MP+ Cameras and Other Sensors datasheet (Rev. A) (영어) PDF | HTML

TDES9640

활성

데이터 시트

지금 주문하기

제품 상세 정보

Applications

Camera SerDes

Color depth (bpp)

24

Function

Deserializer

Input compatibility

V3Link

Pixel clock frequency (max) (MHz)

100

Output compatibility

MIPI CSI-2

Features

Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Port Replication Mode, Ultra-Low Data and Control Path Latency

Signal conditioning

Adaptive Equalizer, Programmable Equalizer

EMI reduction

LVDS, SSC Compatible

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

Applications

Camera SerDes

Color depth (bpp)

24

Function

Deserializer

Input compatibility

V3Link

Pixel clock frequency (max) (MHz)

100

Output compatibility

MIPI CSI-2

Features

Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Port Replication Mode, Ultra-Low Data and Control Path Latency

Signal conditioning

Adaptive Equalizer, Programmable Equalizer

EMI reduction

LVDS, SSC Compatible

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

VQFNP (RUR)

88

144 mm² (12 mm × 12 mm)

Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
- Supports 8MP+ imagers
- Single-ended coaxial or shielded twisted-pair (STP) cable
- Power-over-coax (PoC) support
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
CSI v2.1 compliant system interface
Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- CSI Port 0: MIPI CSI-2 output port
- CSI Port 1: MIPI CSI-2 output port
- CSI Port 2: replication port (D-PHY only)
- 16 Virtual channels and VC-ID remapping
- MIPI D-PHY and C-PHY configurable
MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
MIPI C-PHY v1.1 compatible
- Up to 4 trios per port
- Up to 5.7 Gbps per trio, 22.8 Gbps per port
Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x V 3Link RX ports
- Capable of driving another deserializer at the same line rate
10 GPIO pins for sensor synchronization and diagnostics
Dual I2C ports
Frozen frame detection
Automatic receiver equalization
Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
Low power sleep mode with GPIO-state retention
Wide temperature range: -20°C to 85°C

Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
- Supports 8MP+ imagers
- Single-ended coaxial or shielded twisted-pair (STP) cable
- Power-over-coax (PoC) support
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
CSI v2.1 compliant system interface
Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- CSI Port 0: MIPI CSI-2 output port
- CSI Port 1: MIPI CSI-2 output port
- CSI Port 2: replication port (D-PHY only)
- 16 Virtual channels and VC-ID remapping
- MIPI D-PHY and C-PHY configurable
MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
MIPI C-PHY v1.1 compatible
- Up to 4 trios per port
- Up to 5.7 Gbps per trio, 22.8 Gbps per port
Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x V 3Link RX ports
- Capable of driving another deserializer at the same line rate
10 GPIO pins for sensor synchronization and diagnostics
Dual I2C ports
Frozen frame detection
Automatic receiver equalization
Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
Low power sleep mode with GPIO-state retention
Wide temperature range: -20°C to 85°C

The TDES9640 is a V 3Link Enhanced Vision deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps bidirectional control channel for connecting up to 4 data sensors to the processing unit over a coaxial or STP cable. When paired with the TSER9615 or the TSER4905 serializers, the TDES9640 receives video data from image sensors or video sources supporting ultra-high resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2 D-PHY or C-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication in D-PHY mode only. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.

The TDES9640 supports advanced data protection and diagnostic features, as well as multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt, which helps achieve robust sensor module and link operation in the end application.

The TDES9640 is a V 3Link Enhanced Vision deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps bidirectional control channel for connecting up to 4 data sensors to the processing unit over a coaxial or STP cable. When paired with the TSER9615 or the TSER4905 serializers, the TDES9640 receives video data from image sensors or video sources supporting ultra-high resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2 D-PHY or C-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication in D-PHY mode only. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.

The TDES9640 supports advanced data protection and diagnostic features, as well as multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt, which helps achieve robust sensor module and link operation in the end application.

filter

기타 V3Link 시리얼라이저/디시리얼라이저 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

추가 정보 요청

전체 데이터시트 및 추가 리소스가 제공됩니다. 지금 요청

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

1개 모두 보기

상위 문서	유형	직함	형식 옵션	최신 영어 버전 다운로드	날짜
*	데이터 시트	TDES9640 V3LinkTMDeserializer Hub With CSI-2 Output Ports for 8-MP+ Cameras and Other Sensors datasheet (Rev. A)	PDF \| HTML		2023. 11. 16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DS90UB9702-Q1EVM — DS90UB9702-Q1 평가 모듈

DS90UB9702-Q1EVM 평가 모듈(EVM)은 DS90UB9702-Q1 FPD-Link IV 디시리얼라이저 허브를 평가하기 위한 기능 보드 설계입니다. DS90UB9702-Q1은 FPD-Link III 및 FPD-Link IV 시리얼라이저를 사용하여 최대 4개의 독립 비디오 소스에서 데이터를 받을 수 있는 다목적 디시리얼라이저입니다. DS90UB971-Q1 시리얼라이저와 페어링하면 DS90UB9702-Q1은 높은 색 깊이로 8MP+ 이미저로부터 데이터를 수신할 수 있습니다. 이 장치에는 독립형 MIPI DPHY CSI-2 (...)

지원되는 제품 및 하드웨어

요청

애플리케이션 소프트웨어 및 프레임워크

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.

지원되는 제품 및 하드웨어

다운로드 옵션

지원 소프트웨어

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.

지원되는 제품 및 하드웨어

다운로드 옵션

시뮬레이션 모델