TCA9517A
- Two-channel bidirectional buffer
- I2C Bus and SMBus compatible
- Operating supply voltage range of 0.9V to 5.5V on A-side
- Operating supply voltage range of 2.7V to 5.5V on B-side
- Voltage-level translation from 0.9V - 5.5V to 2.7V - 5.5V
- Footprint and functional replacement for PCA9515B
- Active-high repeater-enable input
- Open-drain I2C I/O
- 5.5V Tolerant I2C and enable input support mixed-mode signal operation
- Accommodates standard mode and fast mode I2C devices and multiple controllers
- High-impedance I2C pins when powered-off
- Latch-up performance exceeds 100mA Per JESD 78, class II
- ESD Protection exceeds JESD 22
- 5500V Human-body model (A114-A)
- 200V Machine model (A115-A)
- 1000V Charged-device model (C101)
The TCA9517A is a bidirectional buffer with level shifting capabilities for I2C and SMBus systems. It provides bidirectional voltage-level translation (up-translation/down-translation) between low voltages (down to 0.9V) and higher voltages (2.7V to 5.5V) in mixed-mode applications. This device enables I2C and SMBus systems to be extended without degradation of performance, even during level shifting.
The TCA9517A buffers both the serial data (SDA) and the serial clock (SCL) signals on the I2C bus, thus allowing two buses of up to 400pF bus capacitance to be connected in an I2C application.
The TCA9517A has two types of drivers: A-side drivers and B-side drivers. All inputs and I/Os are over-voltage tolerant to 5.5V, even when the device is unpowered (VCCB and/or VCCA = 0V).
The TCA9517A offers a higher contention level threshold, VILC, than the TCA9517, which allows connections to targets which have weaker pulldown ability.
The type of buffer design on the B-side prevents it from being used in series with devices which use static voltage offset. This is because these devices do not recognize buffered low signals as a valid low and do not propagate it as a buffered low again.
The B-side drivers operate from 2.7V to 5.5V. The output low level for this internal buffer is approximately 0.5V, but the input voltage must be 70mV or more below the output low level when the output internally is driven low. The higher-voltage low signal is called a buffered low. When the B-side I/O is driven low internally, the low is not recognized as a low by the input. This feature prevents a lockup condition from occurring when the input low condition is released.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TCA9517A Level-Shifting I2 C Bus Repeater datasheet (Rev. E) | PDF | HTML | 2025. 10. 7 | |
| 애플리케이션 노트 | Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) | PDF | HTML | 2024. 7. 3 | ||
| 애플리케이션 노트 | Resolving Improper Implementation of the Static Voltage Offset on I2C Buffers | PDF | HTML | 2023. 10. 9 | ||
| 애플리케이션 노트 | Why, When, and How to use I2C Buffers | 2018. 5. 23 | |||
| 애플리케이션 노트 | Choosing the Correct I2C Device for New Designs | PDF | HTML | 2016. 9. 7 | ||
| 애플리케이션 노트 | Understanding the I2C Bus | PDF | HTML | 2015. 6. 30 | ||
| 애플리케이션 노트 | Maximum Clock Frequency of I2C Bus Using Repeaters | 2015. 5. 15 | |||
| 애플리케이션 노트 | I2C Bus Pull-Up Resistor Calculation | PDF | HTML | 2015. 2. 13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
I2C-DESIGNER — I2C 디자이너 툴
PMP23365 — 외부 핫 스왑 및 원격 측정을 지원하는 24V, 3A 클래스 8 PoE PD 레퍼런스 설계
이 레퍼런스 설계는 24V 및 3A 출력을 지원하는 PoE(Power over Ethernet) PD(Power Device) 능동 클램프 순방향 컨버터를 구현합니다. PWM(펄스 폭 모듈레이터) 컨트롤러가 통합된 TPS23730 PD는 능동 클램프 순방향 컨버터를 위한 PoE PD 제어 및 PWM 제어에 필요한 모든 기능을 제공합니다. 이 설계는 옵토커플러 피드백과 함께 2차측 조정(SSR)을 사용합니다. 클래스 7 및 8 PD 애플리케이션을 활성화하기 위해 외부 핫 스왑이 추가되었습니다. INA237은 1차측 DC/DC 입력 (...)
PMP23366 — 원활한 전환과 원격 측정을 지원하는 듀얼 입력 중복 PoE 클래스 6 PD 레퍼런스 설계
이 설계는 듀얼 중복 PoE 입력을 지원하고 이러한 입력과 보조 입력 간에 매끄러운 전환을 지원하는 PoE(Power over Ethernet) 클래스 6 PD(Power Device)를 구현합니다. 최대 51W의 고전력 PoE 제어에 TPS2372-3 PD 컨트롤러 2개가 사용됩니다. 9A 능동 클램프 순방향 컨버터에서 5V는 TPS23734 IC의 PWM 부분을 사용하여 구현됩니다. INA237A는 I2C를 통해 입력 전압/전류/전원/온도 측정을 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.