TAS5404-Q1

활성

I2C 진단 및 로드 덤프를 지원하는 오토모티브 26W, 4채널, 6~18V 아날로그 SE 입력 클래스 D 오디오 증폭기

제품 상세 정보

Output power (W) 45 Power stage supply (max) (V) 18 Power stage supply (min) (V) 5.6 Speaker channels (max) 4 Features thermal pad up Audio input type Analog Input Control interface I2C THD + N at 1 kHz (%) 0.02 Switching frequency (max) (Hz) 530000 Output noise voltage (µV) 60 Rating Automotive Operating temperature range (°C) -40 to 105
Output power (W) 45 Power stage supply (max) (V) 18 Power stage supply (min) (V) 5.6 Speaker channels (max) 4 Features thermal pad up Audio input type Analog Input Control interface I2C THD + N at 1 kHz (%) 0.02 Switching frequency (max) (Hz) 530000 Output noise voltage (µV) 60 Rating Automotive Operating temperature range (°C) -40 to 105
HTQFP (PHD) 64 256 mm² (16 mm × 16 mm)
  • TAS5404-Q1 – Single-Ended Input
  • Four-Channel Class-D Power Amplifier
  • Four Analog Inputs, Four BTL Power Outputs
  • Typical Output Power at 10% THD+N
    • 26 W/Ch Into 4 Ω at 14.4 V
    • 45 W/Ch Into 2 Ω at 14.4 V
  • Channels Can Be Paralleled (PBTL) for High-
    Current Applications
  • THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
  • Patented Pop-and-Click-Reduction Technology
    • Soft Muting With Gain Ramp Control
    • Common-Mode Ramping
  • Patented AM Interference Avoidance
  • Patented Cycle-by-Cycle Current Limit
  • 75dB PSRR
  • Four-Address I2C Serial Interface for Device
    Configuration and Control
  • Channel Gains: 12 dB, 20 dB, 26 dB, 32 dB
  • Load Diagnostic Functions:
    • Output Open and Shorted Load
    • Output-to-Power and Output-to-Ground Shorts
    • Patented Tweeter Detection
  • Protection and Monitoring Functions:
    • Short-Circuit Protection
    • Load-Dump Protection to 50 V
    • Fortuitous Open-Ground and Open-Power
      Tolerant
    • Patented Output DC Level Detection While
      Music Playing
    • Overtemperature Protection
    • Overvoltage and Undervoltage Conditions
    • Clip Detection
  • 64-Pin QFP (PHD) Power Package With Heat
    Slug Up
  • Designed for Automotive EMC Requirements
  • Qualified According to AEC-Q100
  • ISO9000:2002 TS16949-Certified
  • –40°C to 105°C Ambient Temperature Range
  • TAS5404-Q1 – Single-Ended Input
  • Four-Channel Class-D Power Amplifier
  • Four Analog Inputs, Four BTL Power Outputs
  • Typical Output Power at 10% THD+N
    • 26 W/Ch Into 4 Ω at 14.4 V
    • 45 W/Ch Into 2 Ω at 14.4 V
  • Channels Can Be Paralleled (PBTL) for High-
    Current Applications
  • THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
  • Patented Pop-and-Click-Reduction Technology
    • Soft Muting With Gain Ramp Control
    • Common-Mode Ramping
  • Patented AM Interference Avoidance
  • Patented Cycle-by-Cycle Current Limit
  • 75dB PSRR
  • Four-Address I2C Serial Interface for Device
    Configuration and Control
  • Channel Gains: 12 dB, 20 dB, 26 dB, 32 dB
  • Load Diagnostic Functions:
    • Output Open and Shorted Load
    • Output-to-Power and Output-to-Ground Shorts
    • Patented Tweeter Detection
  • Protection and Monitoring Functions:
    • Short-Circuit Protection
    • Load-Dump Protection to 50 V
    • Fortuitous Open-Ground and Open-Power
      Tolerant
    • Patented Output DC Level Detection While
      Music Playing
    • Overtemperature Protection
    • Overvoltage and Undervoltage Conditions
    • Clip Detection
  • 64-Pin QFP (PHD) Power Package With Heat
    Slug Up
  • Designed for Automotive EMC Requirements
  • Qualified According to AEC-Q100
  • ISO9000:2002 TS16949-Certified
  • –40°C to 105°C Ambient Temperature Range

The TAS5404-Q1 device is a four-channel class-D audio amplifier designed for use in automotive head units. The TAS5404-Q1 device provides four channels at 20 W continuously into 4 Ω at less than 1% THD+N from a 14.4-Vdc supply when used with the application circuit. The input is configured as an analog single-ended interface. The patented PWM topology of the device provides dramatic improvements in efficiency and audio performance over traditional linear amplifier solutions. The improvement in efficiency and audio performance reduces the power dissipated by the amplifier by a factor of ten under typical music playback conditions. The device incorporates all the required functions required by the OEM application. The built-in load diagnostic functions for detecting and diagnosing disconnected speakers help reduce test time during the manufacturing process.

The TAS5404-Q1 device is a four-channel class-D audio amplifier designed for use in automotive head units. The TAS5404-Q1 device provides four channels at 20 W continuously into 4 Ω at less than 1% THD+N from a 14.4-Vdc supply when used with the application circuit. The input is configured as an analog single-ended interface. The patented PWM topology of the device provides dramatic improvements in efficiency and audio performance over traditional linear amplifier solutions. The improvement in efficiency and audio performance reduces the power dissipated by the amplifier by a factor of ten under typical music playback conditions. The device incorporates all the required functions required by the OEM application. The built-in load diagnostic functions for detecting and diagnosing disconnected speakers help reduce test time during the manufacturing process.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
TPA6304-Q1 활성 45W, 2.1MHz 아날로그 입력 4채널 오토모티브 클래스 D Burr-Brown™ 오디오 증폭기 TPA6304-Q1 is our newest 45-W, 2.1-MHz analog input 4-ch amplifier

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
5개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TAS5404-Q1: 26-W Analog Single-Ended Input 4-Channel Class-D Amp with Load Dump Protection and I2C Diagnostics datasheet (Rev. A) PDF | HTML 2015. 10. 2
애플리케이션 노트 Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019. 8. 26
기술 문서 The head unit: understanding car audio amplifier system demands – part 1 PDF | HTML 2016. 1. 14
애플리케이션 노트 Class-D LC Filter Design (Rev. B) 2015. 2. 20
애플리케이션 노트 AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013. 5. 1

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TAS5404Q1EVM — 차량용 헤드 유닛을 위한 I2C 진단 및 보호 기능이 포함된 4채널 아날로그 입력 클래스 D 오디오 증폭기 EVM

The TAS5404Q1EVM showcases TI’s cost-optimized 4-Ch Analog Input Class-D Audio Solution for Automotive Head Unit systems. The TAS5404 solution allows automotive customers the easiest transition from Class-AB systems to a smaller, lighter and more efficient Class-D solution at a comparable (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
시뮬레이션 모델

TAS5404-Q1 IBIS MODEL

SLOM394.ZIP (24 KB) - IBIS 모델
지원되는 제품 및 하드웨어
레퍼런스 디자인

PMP9484 — 부스트 컨버터를 갖춘 고효율 및 소형 100W 차량용 증폭기 레퍼런스 디자인

PMP9484 is a 100W highly efficient and compact automotive amplifier reference design which can be used in 50W +50W stereo or 100W woofer applications.  The design is broadly divided into three main stages:
1.) Highly efficient single-phase synchronous boost converter using the LM5122 controller (...)

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-00573 — 헤드 유닛을 위한 오토모티브 4채널 클래스 D 증폭기 레퍼런스 디자인

TIDA-00573 디자인을 사용하면 일반적인 클래스 AB 증폭기의 폼 팩터로 클래스 D 기반 증폭기 솔루션을 평가할 수 있습니다.  이 디자인은 오디오 증폭기로 인한 열 문제를 완화하고 클래스 D 증폭기에 연관된 스위칭 노이즈를 최소화하기 위해 설계되었습니다.  이 디자인은 2개의 부분션으로 이루어져 있습니다.  첫 번째 부분은 오디오 증폭기 모듈을 강조하고, 두 번째 부분은 오디오 증폭기 모듈을 베이스 보드에 통합하는 데 필요한 회로를 강조합니다.  보드 쌍을 사용하면 디자인의 독립형 성능 테스트가 가능합니다.

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
HTQFP (PHD) 64 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상