TAS2555

활성

5.7W, 디지털 입력, 스마트 증폭기 및 통합 스피커 보호, 고급 EQ 및 8.5V 클래스 H 부스트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TAS2557 활성 5.7W, 디지털 입력, 스마트 증폭기 및 통합 스피커 보호, 고급 EQ 및 8.5V 클래스 H 부스트 TAS2557 features the Post-Filter Feedback (PFFB)
TAS2572 활성 I/V 감지 및 통합 13V 클래스 H 부스트를 지원하는 6.6W 디지털 입력 스마트 증폭기 Higher output power and improved distortion and noise

제품 상세 정보

Audio input type Digital Input Architecture Class-D Boosted, Smart Amp Speaker channels (max) Mono Control interface I2C, SPI Output power (W) 5.7 Power stage supply (max) (V) 8.5 Power stage supply (min) (V) 2.7 THD + N at 1 kHz (%) 0.02 Load (min) (Ω) 4 Analog supply voltage (min) (V) 2.95 Analog supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D Boosted, Smart Amp Speaker channels (max) Mono Control interface I2C, SPI Output power (W) 5.7 Power stage supply (max) (V) 8.5 Power stage supply (min) (V) 2.7 THD + N at 1 kHz (%) 0.02 Load (min) (Ω) 4 Analog supply voltage (min) (V) 2.95 Analog supply voltage (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YZ) 42 See data sheet
  • Ultra low-noise mono boosted class-D amplifier
    • 5.7 W at 1% THD+N and 6.9 W at 10% THD+N into 4-Ω load from 4.2-V supply
    • 3.8 W at 1% THD+N and 4.5 W at 10% THD+N into 8-Ω load from 4.2-V supply
  • Output noise for DAC + class-D (ICN) is 15.9 µV
  • DAC + class-D SNR 111 dB at 1%THD+N/8 Ω
  • THD+N – dB at 1 W / 8 Ω with flat frequency response
  • PSRR dB for 200 mVpp ripple at 217 Hz
  • Input sample rates from 8 kHz to 96 kHz
  • Built-in speaker sense
    • Measures speaker current and voltage
    • Measures VBAT voltage, chip temperature
  • Dedicated real-time DSP for speaker protection
    • Thermal and excursion protection
    • Detects speaker leaks and damage
  • High efficiency class-H boost converter with multi-level tracking
    • 86% at 500 mW in 8 Ω with 3.6 V VBAT
    • 87% at 700 mW in 8 Ω with 4.2 V VBAT
  • Configurable automatic gain control (AGC)
    • Limits battery current consumption
  • Adjustable class-D switching edge-rate control
  • Thermal, short-circuit, and under-voltage protection
  • I2S, Left-justified, right-justified, DSP, and TDM input and output interface,
  • I2C or SPI interface for register control
  • Stereo configuration using two TAS2555 devices
  • Power supplies
    • Boost input: 2.9 V to 5.5 V
    • Analog/digital: 1.65 V to 1.95 V
    • Digital I/O: 1.62 V to 3.6 V
  • 42-ball, 0.5-mm pitch, DSBGA package
  • Ultra low-noise mono boosted class-D amplifier
    • 5.7 W at 1% THD+N and 6.9 W at 10% THD+N into 4-Ω load from 4.2-V supply
    • 3.8 W at 1% THD+N and 4.5 W at 10% THD+N into 8-Ω load from 4.2-V supply
  • Output noise for DAC + class-D (ICN) is 15.9 µV
  • DAC + class-D SNR 111 dB at 1%THD+N/8 Ω
  • THD+N – dB at 1 W / 8 Ω with flat frequency response
  • PSRR dB for 200 mVpp ripple at 217 Hz
  • Input sample rates from 8 kHz to 96 kHz
  • Built-in speaker sense
    • Measures speaker current and voltage
    • Measures VBAT voltage, chip temperature
  • Dedicated real-time DSP for speaker protection
    • Thermal and excursion protection
    • Detects speaker leaks and damage
  • High efficiency class-H boost converter with multi-level tracking
    • 86% at 500 mW in 8 Ω with 3.6 V VBAT
    • 87% at 700 mW in 8 Ω with 4.2 V VBAT
  • Configurable automatic gain control (AGC)
    • Limits battery current consumption
  • Adjustable class-D switching edge-rate control
  • Thermal, short-circuit, and under-voltage protection
  • I2S, Left-justified, right-justified, DSP, and TDM input and output interface,
  • I2C or SPI interface for register control
  • Stereo configuration using two TAS2555 devices
  • Power supplies
    • Boost input: 2.9 V to 5.5 V
    • Analog/digital: 1.65 V to 1.95 V
    • Digital I/O: 1.62 V to 3.6 V
  • 42-ball, 0.5-mm pitch, DSBGA package

The TAS2555 device is a state-of-the-art Class-D audio amplifier which is a full system on a Chip (SoC). The device features a ultra low-noise audio DAC and Class-D power amplifier which incorporates speaker voltage and current sensing feedback. An on-chip, low-latency DSP supports Texas Instruments SmartAmp speaker protection algorithms to maximizes loudness while maintaining safe speaker conditions.

The device can be used easily with any processor with an I2S output and stereo implementations are possible when using two TAS2555 devices. Separate tuning for different speakers is supported allowing customers to add value while maintaining form factor designs. Additionally, the TAS2555 supports separate voice and audio tuning dynamically with ultra-low 15.9 µV ICN regardless of mode of operation making receiver/speaker implementations possible.

A Class-H boost converter generates the Class-D amplifier supply rail. When the audio signal only requires a lower Class-D output power, the boost improves system efficiency by deactivating and connecting VBAT directly to the Class-D amplifier supply. When higher audio output power is required, the multi-level boost quickly activates tracking the signal to provide the additional voltage to the load.

The TAS2555 device is a state-of-the-art Class-D audio amplifier which is a full system on a Chip (SoC). The device features a ultra low-noise audio DAC and Class-D power amplifier which incorporates speaker voltage and current sensing feedback. An on-chip, low-latency DSP supports Texas Instruments SmartAmp speaker protection algorithms to maximizes loudness while maintaining safe speaker conditions.

The device can be used easily with any processor with an I2S output and stereo implementations are possible when using two TAS2555 devices. Separate tuning for different speakers is supported allowing customers to add value while maintaining form factor designs. Additionally, the TAS2555 supports separate voice and audio tuning dynamically with ultra-low 15.9 µV ICN regardless of mode of operation making receiver/speaker implementations possible.

A Class-H boost converter generates the Class-D amplifier supply rail. When the audio signal only requires a lower Class-D output power, the boost improves system efficiency by deactivating and connecting VBAT directly to the Class-D amplifier supply. When higher audio output power is required, the multi-level boost quickly activates tracking the signal to provide the additional voltage to the load.

다운로드 스크립트와 함께 비디오 보기 비디오
추가 정보 요청

PurePath™ Console 3 및 기타 설계 리소스 액세스를 요청하려면 다음을 수행하십시오. TAS2555 신청

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
23개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TAS2555 5.7-W Class-D mono audio amplifier with class-H boost and speaker sense datasheet (Rev. B) PDF | HTML 2019. 2. 28
기술 문서 How smart amps are bringing high-fidelity audio into the smart home PDF | HTML 2021. 5. 3
애플리케이션 노트 Limitations of Capacitor only EMI Filters on Class-D Amplifiers PDF | HTML 2020. 7. 21
애플리케이션 노트 Current and Voltage Sensing Accuracy and Linearity PDF | HTML 2020. 7. 21
애플리케이션 노트 Requesting Access to Audio Software 2020. 6. 18
사용 설명서 SmartAmp Learning Board 2 User's Guide (Rev. A) 2019. 9. 13
애플리케이션 노트 Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019. 8. 26
애플리케이션 노트 Passive Component Selection Guide for Class-D Audio Amplifier 2019. 6. 27
애플리케이션 노트 Battery Voltage Tracking Limiter and Brown-Out Protection PDF | HTML 2019. 6. 26
애플리케이션 노트 PCB Layout Guidelines for TAS2xxx Series Class-D Boosted Audio Amplifier 2019. 6. 6
애플리케이션 노트 Benefits of Class-G and Class-H Boost in Audio Amplifiers 2019. 4. 30
애플리케이션 노트 PLL and Clocking Configuration for Audio Devices 2019. 3. 26
애플리케이션 노트 How the SmartAmp Speaker Protection Algorithm Compensates the Effects of Series 2018. 8. 8
애플리케이션 노트 SmartPA Speaker Protection Algorithm 2018. 8. 6
기술 문서 Don’t limit your audio: how to achieve loud sound from a small speaker PDF | HTML 2017. 12. 18
추가 자료 Calibration and Verification Wave Files 2017. 9. 21
애플리케이션 노트 TAS2555 End System Integration Guide 2017. 9. 8
애플리케이션 노트 Smart Amp Tuning Guide 2017. 9. 5
애플리케이션 노트 TAS2555, TAS2557, and TAS2559 Factory Test and Calibration Guide 2017. 9. 2
애플리케이션 노트 Smart Amp Quick Start Guide 2017. 8. 3
기술 문서 Audio loudness and quality evaluations for smart amplifier solutions PDF | HTML 2016. 1. 22
기술 문서 PurePath Console 3 gets fine-tuned! PDF | HTML 2015. 11. 11
애플리케이션 노트 AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013. 5. 1

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

PP-SALB2-EVM — PP-SALB2-EVM 스마트 증폭기 스피커 특성화 보드 평가 모듈(학습 보드 2)

이 보드는 다음을 지원합니다. TAS2555YZEVMTAS2557EVMTAS2559EVM.

스마트 증폭기 스피커 특성화 보드는 지원되는 TI 스마트 증폭기 및 PurePath 콘솔 소프트웨어와 함께 사용될 경우 사용자가 TI 스마트 증폭기 제품과 함께 사용할 스피커 진동 편위, 온도 및 기타 매개 변수를 측정할 수 있는 기능을 제공합니다.  전체 솔루션은 사용하기 쉬운 단계별 프로세스를 제공하여 전체 스피커 특성화 프로세스를 안내합니다.  특성화가 완료되면 스피커 매개 변수가 PurePath 콘솔에 자동으로 로드되므로 (...)

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

TAS2555YZEVM — TAS2555 5.7W 클래스 D 오디오 증폭기 평가 모듈

The TAS2555YZEVM evaluation module provides users with an small reference board for complete evaluation of the TAS2555 Audio Amplifier. Shipped complete with a reference speaker, users can quickly hear the audio quality of the TAS2555 solution or start developing on their own speaker/application. (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
애플리케이션 소프트웨어 및 프레임워크

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ 콘솔은 오디오 제품의 개발과 관련된 평가, 구성 및 디버그 프로세스를 간소화할 수 있도록 특별히 설계된, 고집적의 사용이 편리한 오디오 개발 제품군입니다. PurePath™ 콘솔 3 소프트웨어를 쉽게 사용하는 방법을 시청해 보세요.

PurePath 콘솔의 직관적인 그래픽 인터페이스는 고급 오디오 엔지니어링 전문 지식이 필요하지 않으므로 오디오 설계를 간단하게 만듭니다. 제품 개발 시간을 단축하는 간편한 그래픽 인터페이스에 구현된 PurePath 콘솔의 여러 고급 제어 기능을 통해 고도로 최적화된 오디오 성능, 최소 (...)
지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

SLAC723 — TAS2555SW-Android

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

TAS2XXX-DRIVERS — TAS25XX 및 TAS27XX 시리즈 클래스 D 증폭기를 위한 Android 및 기타 드라이버

이러한 Android 드라이버는 TI의 저전력 디지털 입력 클래스 D 오디오 증폭기 장치를 지원합니다. "Get software(소프트웨어 다운로드)" 버튼은 이러한 오픈 소스 드라이버의 git.ti.com 리포지토리로 연결됩니다.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YZ) 42 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오 시리즈

모든 비디오 보기

동영상