제품 상세 정보

Number of DAC channels 2 Sampling rate (min) (kHz) 4 Sampling rate (max) (kHz) 768 THD+N (dB) -101 Control interface I2C, SPI Resolution (Bits) 16, 20, 24, 32 DAC SNR (typ) (dB) 110 Analog outputs 2, 4 Operating temperature range (°C) -40 to 125 Rating Automotive
Number of DAC channels 2 Sampling rate (min) (kHz) 4 Sampling rate (max) (kHz) 768 THD+N (dB) -101 Control interface I2C, SPI Resolution (Bits) 16, 20, 24, 32 DAC SNR (typ) (dB) 110 Analog outputs 2, 4 Operating temperature range (°C) -40 to 125 Rating Automotive
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: -40°C ≤ TA ≤ +125°C
  • Stereo differential or quad single-ended low-power audio DAC
    • Performance:
      • DAC to diffrential line-out dynamic range: 110dB
      • DAC to diffrential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-diffrential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample Rates (fs) = 4kHz to 768kHz
  • Key features
    • Analog input to output bypass path
    • 4-channel PDM digital microphone record path
    • Input and output mix/mux options
    • Voice activity detection
    • Ultrasonic activity detection
    • Ultrasonic signal or tone generator
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and ultra-low latency filter options
    • Programmable HPF and biquad filters
    • I2C & SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 Bits
      • Bus controller and target modes
      • Daisy chain in TDM mode
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 10.5mW for 2-Ch playback (1.8V supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: -40°C ≤ TA ≤ +125°C
  • Stereo differential or quad single-ended low-power audio DAC
    • Performance:
      • DAC to diffrential line-out dynamic range: 110dB
      • DAC to diffrential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-diffrential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample Rates (fs) = 4kHz to 768kHz
  • Key features
    • Analog input to output bypass path
    • 4-channel PDM digital microphone record path
    • Input and output mix/mux options
    • Voice activity detection
    • Ultrasonic activity detection
    • Ultrasonic signal or tone generator
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and ultra-low latency filter options
    • Programmable HPF and biquad filters
    • I2C & SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 Bits
      • Bus controller and target modes
      • Daisy chain in TDM mode
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 10.5mW for 2-Ch playback (1.8V supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V

The TAD5112-Q1 is an automotive low-power audio DAC with 2VRMS differential output, 110dB dynamic range stereo channels or 1VRMS single-ended output, 107dB dynamic range quad channels. The TAD5112-Q1 supports both differential and single-ended inputs and outputs. The DAC outputs can be configured for either line-output or headphone loads. The TAD5112-Q1 can drive up to 62.5mW into a 16Ω headphone load. The TAD5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra low-latency filter modes, and allows for sample rates up to 768kHz for both the DAC and PDM microphone signal-chains. The TAD5112-Q1 supports analog input to output bypass option and also recording up to four-channel digital microphones with the PDM interface. Data from analog-in and digital-in can be mixed inside the device as well. The TAD5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, make TAD5112-Q1 an excellent choice for space-constrained audio applications.

The TAD5112-Q1 is an automotive low-power audio DAC with 2VRMS differential output, 110dB dynamic range stereo channels or 1VRMS single-ended output, 107dB dynamic range quad channels. The TAD5112-Q1 supports both differential and single-ended inputs and outputs. The DAC outputs can be configured for either line-output or headphone loads. The TAD5112-Q1 can drive up to 62.5mW into a 16Ω headphone load. The TAD5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra low-latency filter modes, and allows for sample rates up to 768kHz for both the DAC and PDM microphone signal-chains. The TAD5112-Q1 supports analog input to output bypass option and also recording up to four-channel digital microphones with the PDM interface. Data from analog-in and digital-in can be mixed inside the device as well. The TAD5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, make TAD5112-Q1 an excellent choice for space-constrained audio applications.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
TAD5212-Q1 활성 120dB 동적 범위와 헤드폰 및 라인 드라이버를 지원하는 차량용 고성능 스테레오 오디오 DAC Software compatible with higher SNR

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
8개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TAD5112-Q1 Automotive Low-Power Stereo audio DAC with 110 dB Dynamic Range and Headphone/Line Driver datasheet (Rev. A) PDF | HTML 2025. 3. 12
애플리케이션 노트 Input Common-Mode Tolerance Modes for TAx5x1x/ TAx5x1x-Q1 Devices PDF | HTML 2026. 4. 30
애플리케이션 노트 Manual Clocking Configuration for the TAx5x1x Family PDF | HTML 2026. 3. 26
애플리케이션 노트 TAD52xx Power Consumption Matrix Across Various Usage Scenarios PDF | HTML 2025. 8. 11
Application brief TAC5x1x and TAC5x1x-Q1 Programmable Biquad Filters - Configuration and Applications PDF | HTML 2024. 9. 27
애플리케이션 노트 Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family (Rev. A) PDF | HTML 2024. 9. 5
애플리케이션 노트 Headset Detection for TAx52xx Family PDF | HTML 2024. 4. 11
애플리케이션 노트 Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family PDF | HTML 2023. 11. 7

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TAC5112EVM-K — TAC5112 평가 모듈

TAC5112 평가 모듈(EVM)을 사용하면 지상 모바일 라디오, IP 전화기 또는 전문 오디오 애플리케이션을 위한 2채널 저전력 스테레오 코덱인 TAC5112의 기능을 테스트할 수 있습니다. EVM과 AC-MB의 페어링은 전원, 제어 및 디지털 오디오 데이터를 평가 모듈에 제공하는 유연한 마더보드입니다.
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
애플리케이션 소프트웨어 및 프레임워크

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ 콘솔은 오디오 제품의 개발과 관련된 평가, 구성 및 디버그 프로세스를 간소화할 수 있도록 특별히 설계된, 고집적의 사용이 편리한 오디오 개발 제품군입니다. PurePath™ 콘솔 3 소프트웨어를 쉽게 사용하는 방법을 시청해 보세요.

PurePath 콘솔의 직관적인 그래픽 인터페이스는 고급 오디오 엔지니어링 전문 지식이 필요하지 않으므로 오디오 설계를 간단하게 만듭니다. 제품 개발 시간을 단축하는 간편한 그래픽 인터페이스에 구현된 PurePath 콘솔의 여러 고급 제어 기능을 통해 고도로 최적화된 오디오 성능, 최소 (...)
지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

TAC5X1X-LINUX-DRIVER — These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC.

These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC. These drivers include both .c and .h files.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGE) 24 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상