홈 오디오, 햅틱, 피에조 오디오 컨버터 오디오 코덱
홈
오디오, 햅틱, 피에조
오디오 컨버터
오디오 코덱

TAC5242

활성

동적 범위 119dB ADC 및 동적 범위 120dB DAC를 지원하는 하드웨어 제어 스테레오 오디오 코덱

지금 주문하기
데이터 시트

TAC5242

활성
데이터 시트 지금 주문하기

제품 상세 정보

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface I2S, L, TDM Control interface H/W Analog inputs 2 Analog outputs 2 Features High Dynamic Range, High-performance, Low latency, Low power, Mic bias, Phase-locked loop (PLL), Pin control, Single supply, Stereo headphone amplifier Sampling rate (max) (kHz) 192 Rating Catalog ADC SNR (typ) (dB) 119 DAC SNR (typ) (dB) 120 Operating temperature range (°C) -40 to 125
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface I2S, L, TDM Control interface H/W Analog inputs 2 Analog outputs 2 Features High Dynamic Range, High-performance, Low latency, Low power, Mic bias, Phase-locked loop (PLL), Pin control, Single supply, Stereo headphone amplifier Sampling rate (max) (kHz) 192 Rating Catalog ADC SNR (typ) (dB) 119 DAC SNR (typ) (dB) 120 Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • Stereo audio ADC Channels
    • Performance:
      • Line/Microphone differential input dynamic range: 119dB
      • Differential input THD+N: –98dB
    • Input voltage:
      • Differential, 2VRMS full-scale inputs
      • Single-ended, 1VRMS full-scale inputs
    • ADC sample rates (fS) = 8kHz to 192kHz
    • Digital HPF with configurable cut-off frequency:
      • 1Hz or 12Hz, at 48kHz sampling rate
    • Low noise microphone bias
  • Stereo audio DAC Channels
    • Performance:
      • DAC to differential line-out dynamic range: 120 dB
      • DAC to pseudo-differential headphone-out dynamic range: 110 dB
      • THD+N: –100 dB
    • Output voltage:
      • Differential line-out/receiver, 2VRMS full-scale
      • Pseudo-differential headphone, 1VRMS full-scale
      • Single-ended line-out, 1VRMS full-scale
    • DAC sample rates (fs) = 8kHz to 192kHz
  • Common Features
    • Pin or Hardware Control
    • Audio Serial Interface
      • Format: TDM, I2S, or Left-justified (LJ)
      • Bus Controller and Target Modes
      • Configurable TDM Slots
      • Word Length: Selectable 24 or 32 Bits
    • Pin-selectable digital decimation/interpolation filter options:
      • Linear-phase or Low-latency
    • Integrated PLL
    • Auto clock & sample rate detection
    • Interrupt output on clock error
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Stereo audio ADC Channels
    • Performance:
      • Line/Microphone differential input dynamic range: 119dB
      • Differential input THD+N: –98dB
    • Input voltage:
      • Differential, 2VRMS full-scale inputs
      • Single-ended, 1VRMS full-scale inputs
    • ADC sample rates (fS) = 8kHz to 192kHz
    • Digital HPF with configurable cut-off frequency:
      • 1Hz or 12Hz, at 48kHz sampling rate
    • Low noise microphone bias
  • Stereo audio DAC Channels
    • Performance:
      • DAC to differential line-out dynamic range: 120 dB
      • DAC to pseudo-differential headphone-out dynamic range: 110 dB
      • THD+N: –100 dB
    • Output voltage:
      • Differential line-out/receiver, 2VRMS full-scale
      • Pseudo-differential headphone, 1VRMS full-scale
      • Single-ended line-out, 1VRMS full-scale
    • DAC sample rates (fs) = 8kHz to 192kHz
  • Common Features
    • Pin or Hardware Control
    • Audio Serial Interface
      • Format: TDM, I2S, or Left-justified (LJ)
      • Bus Controller and Target Modes
      • Configurable TDM Slots
      • Word Length: Selectable 24 or 32 Bits
    • Pin-selectable digital decimation/interpolation filter options:
      • Linear-phase or Low-latency
    • Integrated PLL
    • Auto clock & sample rate detection
    • Interrupt output on clock error
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C

The TAC5242 is a high-performancelow-power stereo audio codec with 2VRMS differential input, 119dB dynamic range ADC and 2VRMS differential output, 120dB dynamic range DAC. The TAC5242 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations and the DAC output can be configured for either line-output or headphone loads. The DAC can drive upto 62.5mW into a 16Ω headphone load. The device integrates a phase-locked loop (PLL) and supports sample rates up to 192kHz for both the ADC and DAC signal chains. The device also integrates a DC-removal digital high-pass filter (HPF) with configurable cut-off for the ADC signal chain. The TAC5242 supports time-division multiplexing (TDM), left-justified (LJ), or I2S audio formats in controller and target modes, and is pin or hardware controlled. These integrated high-performance features, pin control along with a single supply operation, make TAC5242 an excellent choice for space-constrained audio applications.

The TAC5242 is a high-performancelow-power stereo audio codec with 2VRMS differential input, 119dB dynamic range ADC and 2VRMS differential output, 120dB dynamic range DAC. The TAC5242 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations and the DAC output can be configured for either line-output or headphone loads. The DAC can drive upto 62.5mW into a 16Ω headphone load. The device integrates a phase-locked loop (PLL) and supports sample rates up to 192kHz for both the ADC and DAC signal chains. The device also integrates a DC-removal digital high-pass filter (HPF) with configurable cut-off for the ADC signal chain. The TAC5242 supports time-division multiplexing (TDM), left-justified (LJ), or I2S audio formats in controller and target modes, and is pin or hardware controlled. These integrated high-performance features, pin control along with a single supply operation, make TAC5242 an excellent choice for space-constrained audio applications.

filter 기타 오디오 코덱 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
TAC5212 활성 동적 범위 119dB ADC 및 동적 범위 120dB DAC를 지원하는 고성능 스테레오 오디오 코덱 Software-controlled version

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
5개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TAC5242 Hardware-control stereo audio codec with 119 dB dynamic range ADC and 120 dB dynamic range DAC datasheet (Rev. A) PDF | HTML 2024. 11. 5
애플리케이션 노트 How to Reduce Noise in Audio Data Converters PDF | HTML 2026. 7. 14
애플리케이션 노트 Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family (Rev. A) PDF | HTML 2024. 9. 5
애플리케이션 노트 Analog Input Configurations, Mixing and Muxing of TAx5x1x Devices (Rev. A) PDF | HTML 2024. 5. 15
Product overview Audio ADC, DAC, and CODEC for Professional Audio and Music Applications PDF | HTML 2024. 2. 13

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TAC5242EVM-K — TAC5242 평가 모듈

TAC5242EVM-K 평가 모듈(EVM)을 사용하면 육상 이동 무선 장치, IP 전화 또는 전문가용 오디오 애플리케이션에 적합한 하드웨어 제어 2채널 고성능 스테레오 코덱인 TAC5242의 기능을 테스트할 수 있습니다. 평가 모듈과 AC-MB의 페어링은 전원, 제어 및 디지털 오디오 데이터를 평가 모듈에 제공하는 유연한 마더보드입니다.
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGE) 24 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상