SN74AUC125

활성

3상 출력을 지원하는 4채널 0.8V~2.7V 고속 버퍼

지금 주문하기

데이터 시트

document-pdfAcrobat SN74AUC125 datasheet (Rev. A) (영어)

SN74AUC125

활성

데이터 시트

지금 주문하기

제품 상세 정보

Technology family

AUC

Number of channels

4

IOL (max) (mA)

9

Supply current (max) (µA)

10

IOH (max) (mA)

-9

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Over-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

AUC

Number of channels

4

IOL (max) (mA)

9

Supply current (max) (µA)

10

IOH (max) (mA)

-9

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Over-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

VQFN (RGY)

14

12.25 mm² (3.5 mm × 3.5 mm)

Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
I_off Supports Partial-Power-Down Mode Operation
Sub-1-V Operable
Max t_pd of 2.1 ns at 1.8 V
Low Power Consumption, 10-µA Max I_CC
±8-mA Output Drive at 1.8 V
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1500-V Charged-Device Model (C101)

Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
I_off Supports Partial-Power-Down Mode Operation
Sub-1-V Operable
Max t_pd of 2.1 ns at 1.8 V
Low Power Consumption, 10-µA Max I_CC
±8-mA Output Drive at 1.8 V
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1500-V Charged-Device Model (C101)

This quadruple bus buffer gate is designed for 0.8-V to 2.7-V V_CC operation, but is designed specifically for 1.6-V to 1.95-V V_CCoperation.

The SN74AUC125 contains four independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

This quadruple bus buffer gate is designed for 0.8-V to 2.7-V V_CC operation, but is designed specifically for 1.6-V to 1.95-V V_CCoperation.

The SN74AUC125 contains four independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

filter

기타 비인버팅 버퍼 및 드라이버 찾기

다운로드 스크립트와 함께 비디오 보기 비디오