SN65LBC176
- Bidirectional Transceiver
- Meets or Exceeds the Requirements of ANSI Standard TIA/EIA−485−A and ISO 8482:1987(E)
- High-Speed Low-Power LinBiCMOS™ Circuitry
- Designed for High-Speed Operation in Both Serial and Parallel Applications
- Low Skew
- Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
- Very Low Disabled Supply Current . . . 200 µA Maximum
- Wide Positive and Negative Input/Output Bus Voltage Ranges
- Thermal-Shutdown Protection
- Driver Positive-and Negative-Current Limiting
- Open-Circuit Failsafe Receiver Design
- Receiver Input Sensitivity . . . ±200 mV Max
- Receiver Input Hysteresis . . . 50 mV Typ
- Operates From a Single 5-V Supply
- Glitch-Free Power-Up and Power-Down Protection
- Available in Q-Temp Automotive HighRel Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards
These transceivers are suitable for ANSI Standard TIA/EIA−485 (RS-485) and ISO 8482 applications to the extent that they are specified in the operating conditions and characteristics section of this data sheet. Certain limits contained in TIA/EIA−485−A and ISO 8482:1987 (E) are not met or cannot be tested over the entire military temperature range.
The SN55LBC176 is characterized for operation from –55°C to 125°C. The SN65LBC176 is characterized for operation from –40°C to 85°C, and the SN65LBC176Q is characterized for operation from –40°C to 125°C. The SN75LBC176 is characterized for operation from 0°C to 70°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
3개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | SNx5LBC176 Differential Bus Transceivers datasheet (Rev. I) | PDF | HTML | 2022. 10. 27 | |
| 아날로그 디자인 학술지 | 2Q 2013 Issue Analog Applications Journal | 2013. 4. 16 | |||
| 아날로그 디자인 학술지 | RS-485 failsafe biasing: Old versus new transceivers | 2013. 4. 16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
RS485-HF-DPLX-EVM — RS-485 하프 듀플렉스 평가 모듈
RS-485 하프 듀플렉스 평가 모듈(EVM)은 설계자가 SN65HVD1x, SN65HVD2x, SN65HVD7x, SN65HVD8x 및 SN65HVD96 반이중 트랜시버를 사용하여 데이터 전송 시스템의 빠른 개발 및 분석을 지원하고 장치 성능을 평가하는 데 도움이 됩니다. EVM 보드는 보드에 납땜된 RS-485 장치가 없습니다. 사용자는 평가를 위한 샘플을 요청하거나 TI RS-485 하프 듀플렉스 장치 중 하나를 구매할 수 있습니다. 호환되는 디바이스의 전체 목록은 EVM 사용 설명서를 참조하세요.
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| PDIP (P) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.