PCM6120-Q1
- Multichannel high-performance
ADC:
- 2-channel analog microphones or line-in
- 4-channel digital PDM microphones
- Up to 2 analog and up to 2 digital microphone channels
- ADC line and microphone differential input performance:
- Dynamic range (DR):
- 123-dB, dynamic range enhancer (DRE) enabled
- 113-dB, DRE disabled
- THD+N: –95 dB
- Dynamic range (DR):
- ADC channel summing mode, DR performance:
- 116-dB, DRE disabled, 2-channel summing
- ADC input voltage:
- Differential, 2-VRMS full-scale inputs
- Single-ended, 1-VRMS full-scale inputs
- ADC sample rate (fS) = 8 kHz to 768 kHz
- Programmable channel settings:
- Channel gain: 0 dB to 42 dB, 0.5-dB steps
- Digital volume control: –100 dB to 27 dB
- Gain calibration with 0.1-dB resolution
- Phase calibration with 163-ns resolution
- Programmable microphone bias or supply voltage generation
- Low-latency signal processing filter selection
- Programmable HPF and biquad digital filters
- Automatic gain controller (AGC)
- Voice activity detection (VAD)
- I2C control interface
- Integrated high-performance audio PLL
- Automatic clock divider setting configurations
- Audio serial data interface:
- Format: TDM, I2S, or left-justified (LJ)
- Word length: 16 bits, 20 bits, 24 bits, or 32 bits
- Master or slave interface
- Single-supply operation: 3.3 V or 1.8 V
- I/O-supply operation: 3.3 V or 1.8 V
- Power consumption for 1.8-V AVDD
supply:
- 9.5 mW/channel at 48-kHz sample rate
The PCM6120-Q1 is a Burr-Brown™ high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels or four digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programmable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with the I2C interface. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.
The PCM6120-Q1 is specified from –40°C to +125°C, and is offered in a 20-pin WQFN package.
PurePath™ 콘솔 3, ADC6120EVM-PDK GUI 및 기타 설계 리소스를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADC6120Q1EVM-PDK — PCM6120-Q1 평가 모듈, 스테레오, 768kHz, 오디오 아날로그-디지털 컨버터, 123dB SNR을 지원
ADC6120Q1EVM-PDK 평가 모듈(EVM)은 PCM6120-Q1 장치, 스테레오 고성능 오디오 아날로그-디지털 변환기(ADC)의 기능을 테스트하는 데 사용되며, 이는 음성 작동 시스템, 전문가용 마이크, 오디오 회의, 휴대용 컴퓨터 통신 및 엔터테인먼트 애플리케이션에 사용됩니다. EVM과 AC-MB의 페어링은 전원, 제어 및 디지털 오디오 데이터를 EVM에 제공하는 유연한 마더보드입니다.
PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development
PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.
PurePath Console’s (...)
ADCX120EVM-SW — GUI and software for PurePath™ Console 3 for ADC3120EVM-PDK, ADC5120EVM-PDK and ADC6120EVM-PDK
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTE) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.