PCA9543A
- 1-of-2 Bidirectional Translating Switches
- I2C Bus and SMBus Compatible
- Two Active-Low Interrupt Inputs
- Active-Low Interrupt Output
- Active-Low Reset Input
- Two Address Pins Allowing up to Four PCA9543A Devices on the I2C Bus
- Channel Selection Via I2C Bus, in Any Combination
- Power-up With All Switch Channels Deselected
- Low RON Switches
- Allows Voltage-Level Translation Between 1.8-V, 2.5-V, 3.3-V, and 5-V Buses
- No Glitch on Power-up
- Supports Hot Insertion
- Low Standby Current
- Operating Power-Supply Voltage Range of 2.3 V to 5.5 V
- 5.5-V Tolerant Inputs
- 0 to 400-kHz Clock Frequency
- Latch-Up Performance Exceeds 100-mA Per JESD78
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 1000-V Charged-Device Model (C101)
The PCA9543A is a dual bidirectional translating switch controlled by the I2C bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Either individual SCn/SDn channel or both channels can be selected, determined by the contents of the programmable control register. Two interrupt inputs ( INT1– INT0), one for each of the downstream pairs, are provided. One interrupt output ( INT) acts as an AND of the two interrupt inputs.
An active-low reset ( RESET) input allows the PCA9543A to recover from a situation where one of the downstream I2C buses is stuck in a low state. Pulling RESET low resets the I2C state machine and causes both of the channels to be deselected, as does the internal power-on reset function.
The pass gates of the switches are constructed such that the VCC pin can be used to limit the maximum high voltage, which will be passed by the PCA9543A. This allows the use of different bus voltages on each pair, so that 1.8-V, 2.5-V, or 3.3-V parts can communicate with 5-V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5.5-V tolerant.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | PCA9543A 2-Channel I2C Bus Switch With Interrupt Logic and Reset datasheet (Rev. B) | PDF | HTML | 2021. 3. 11 | |
| 애플리케이션 노트 | I2C Solutions for Hot Swap Applications (Rev. A) | 2023. 1. 31 | |||
| 애플리케이션 노트 | I2C Dynamic Addressing | 2019. 4. 25 | |||
| 애플리케이션 노트 | Choosing the Correct I2C Device for New Designs | PDF | HTML | 2016. 9. 7 | ||
| 애플리케이션 노트 | Understanding the I2C Bus | PDF | HTML | 2015. 6. 30 | ||
| 애플리케이션 노트 | Maximum Clock Frequency of I2C Bus Using Repeaters | 2015. 5. 15 | |||
| 애플리케이션 노트 | I2C Bus Pull-Up Resistor Calculation | PDF | HTML | 2015. 2. 13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
I2C-DESIGNER — I2C 디자이너 툴
TIDA-060039 — 유도성 터치 및 자기 다이얼 비접촉 사용자 인터페이스 레퍼런스 설계
이 레퍼런스 설계는 유도성 및 홀 효과 센서 기술을 사용하여 인간-기계 인터페이스를 제공합니다. 유도성 감지 장치는 매끄러운 표면에 8개의 각기 다른 터치 버튼을 생성하고, 홀 효과 센서는 추가 버튼으로 사용할 수 있는 회전식 자기 다이얼을 생성하는 데 사용됩니다.
유도성 감지 터치 버튼을 사용하면 누르는 힘을 사용해 버튼 누르기를 결정하는 강력한 솔루션을 제공할 수 있습니다. 따라서 먼지나 버튼 표면의 손상 같은 환경적 요인을 무시하고 장갑을 착용한 상태로 터치 버튼을 사용할 수 있습니다. 홀 효과 센서 다이얼은 무접촉 회전을 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 14 | Ultra Librarian |
| TSSOP (PW) | 14 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.