The OPA838 decompensated voltage-feedback operational amplifier provides a high, 300MHz gain bandwidth product with 1.8nV/√Hz input noise voltage, requiring only a trimmed 0.95mA supply current. These features combine to provide an extremely power-efficient device for photodiode transimpedance designs and high-voltage gain stages, which require the lowest input voltage noise in signal receiver applications.
Operating at the minimum recommended noninverting gain of 6V/V results in a 90MHz, –3dB bandwidth. Extremely low input noise and offset voltage make the OPA838 an excellent choice for high gains. Even at a dc-coupled gain of 1000V/V, a 300kHz signal bandwidth is available with a maximum output offset voltage of ±125mV.
The single-channel OPA838 is available in 6-pin SOT-23, 6-pin SC70, and 8-pin X2QFN packages, all with a power shutdown feature. The OPA838 is also available in a 5-pin SC70 package.
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | OPA838 1mA, 300MHz Gain Bandwidth, Voltage-Feedback Op Amp datasheet (Rev. E) | PDF | HTML | 2025/08/06 |
| Technical article | 3 common questions when designing with high-speed amplifiers | PDF | HTML | 2020/07/17 | |
| Application brief | Higher accuracy using an external amplifier in ultrasonic flow measurement | 2019/02/05 | ||
| Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005/01/17 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| SOT-SC70 (DCK) | 5 | Ultra Librarian |
| SOT-SC70 (DCK) | 6 | Ultra Librarian |
| X2QFN (DXB) | 8 | Ultra Librarian |
Calculator installer
General calculator tool for analog design support.