OPA4H199-SP
- QML Class-P Radiation Hardeness Assured (QMLP-RHA) grade
- Available in small-sized SOT-23 packaging
- Radiation performance:
- Single Event Latch-up (SEL) immune to 65MeV-cm2/mg
- Total Ionizing Dose (TID) Radiation-hardness-assured (RHA) up to 100krad(Si)
- Supports defense, aerospace, and medical applications
- Single controlled baseline
- One fabrication, assembly and test site
- Gold wire
- NiPdAu lead finish
- Available in military (–55°C to 125°C) temperature range
- Extended product life cycle
- Product traceability
- Enhanced mold compound for low outgassing
- Low offset voltage: ±125µV
- Low noise: 10.8nV/√Hz at 1kHz
- High common-mode rejection: 130dB
- Low bias current: ±10pA
- Rail-to-rail input and output
- Wide bandwidth: 4.5MHz GBW
- High slew rate: 21V/µs
- High capacitive load drive: 1nF
- MUX-friendly/comparator inputs
- Low quiescent current: 560µA per amplifier
- Wide supply: ±1.35V to ±20V, 2.7V to 40V
- Robust EMIRR performance: EMI/RFI filters on input and supply pins
The OPA4H199-SP is a high voltage (40V) general purpose operational amplifiers for space application. The device offers exceptional DC precision and AC performance, including rail-to-rail input/output, low offset (±125µV, typical), low offset drift (±0.3µV/°C, typical), low noise (10.8nV/√Hz and 1.8µVPP), and 4.5MHz bandwidth.
Unique features such as differential and common-mode input-voltage range to the supply rail, high output current (±75mA), high slew rate (21V/µs), and high capacitive load drive (1nF) make the OPA4H199-SP a robust, high-performance operational amplifier for high-voltage space applications.
The OPA4H199-SP is available in a small-sized, radiation-hardened plastic, 14-pin SOT-23 (DYY) package. The SOT-23 (DYY) package has a body size that is less than 1/5th of the size of traditional 14-pin ceramic packages. The OPA4H199-SP is specified from –55°C to 125°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPA4H199-SP 40V, QML Class-P, Radiation Hardness Assured (RHA), Rail-to-Rail Input and Output, Low Offset Voltage, Low Noise Op Amp in Space-Grade Plastic datasheet | PDF | HTML | 2024. 12. 13 | |
| * | 방사능 및 안정성 보고서 | OPA4H199-SP Single-Event Effects (SEE) Radiation Report | PDF | HTML | 2024. 12. 18 | |
| * | 방사능 및 안정성 보고서 | OPA4H199-SP Total Ionizing Dose (TID) Radiation Report | PDF | HTML | 2024. 12. 13 | |
| * | 방사능 및 안정성 보고서 | OPA4H199-SP Neutron Displacement Damage (NDD) Characterization Report | PDF | HTML | 2024. 12. 10 | |
| * | SMD | OPA4H199-SP SMD 5962-23214 | 2025. 1. 29 | ||
| Application brief | TI's Space Grade Precision ADCs in Laser Communication Terminals (Rev. A) | PDF | HTML | 2026. 7. 9 | ||
| 애플리케이션 노트 | Space ADC Circuit Cookbook | PDF | HTML | 2026. 5. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DYY-AMP-EVM — DYY 패키지의 연산 증폭기용 평가 모듈
DYY-AMP-EVM은 DYY-14(SOT-23 THN) 패키지로 제공되는 연산 증폭기의 성능을 테스트할 수 있는 평가 모듈(EVM)입니다. 이 EVM을 인버팅 증폭기, 비인버팅 증폭기 및 차동 증폭기로 손쉽게 구성할 수 있어 엔지니어가 설계 개념을 빠르게 평가하고 확인할 수 있습니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DYY) | 14 | Ultra Librarian |