OPA2673

활성

능동 오프라인 제어를 지원하는 듀얼, 광대역, 고출력 증폭기 및 PLC 라인 드라이버

제품 상세 정보

Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5.75 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 13 GBW (typ) (MHz) 600 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3500 Vn at flatband (typ) (nV√Hz) 2.4 Vn at 1 kHz (typ) (nV√Hz) 5.5 Iq per channel (typ) (mA) 16.5 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 56 Input bias current (max) (pA) 25000000 Offset drift (typ) (µV/°C) 25 Iout (typ) (mA) 700 2nd harmonic (dBc) 67 3rd harmonic (dBc) 80 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5.75 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 13 GBW (typ) (MHz) 600 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3500 Vn at flatband (typ) (nV√Hz) 2.4 Vn at 1 kHz (typ) (nV√Hz) 5.5 Iq per channel (typ) (mA) 16.5 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 56 Input bias current (max) (pA) 25000000 Offset drift (typ) (µV/°C) 25 Iout (typ) (mA) 700 2nd harmonic (dBc) 67 3rd harmonic (dBc) 80 Frequency of harmonic distortion measurement (MHz) 10
VQFN (RGV) 16 16 mm² 4 x 4
  • Wideband operation: 340 MHz (G = 4 V/V)
  • Unity-gain stable: 600 MHz (G = 1 V/V)
  • High output current: 700 mA
  • Active offline mode for TDMA
  • Adjustable power modes:
    • Full-bias mode: 16.5 mA/channel
    • 75% bias mode: 12.5 mA/channel
    • 50% bias mode: 8.5 mA/channel
    • Off-Line mode: 2.4 mA/channel
  • Bipolar-supply range: ±3.5 V to ±6.5 V
  • Single-supply range: 5.75 V to 13 V
  • High slew rate: 3500 V/µs
  • Overtemperature protection circuit
  • Output current limit (±1 A)
  • Wideband operation: 340 MHz (G = 4 V/V)
  • Unity-gain stable: 600 MHz (G = 1 V/V)
  • High output current: 700 mA
  • Active offline mode for TDMA
  • Adjustable power modes:
    • Full-bias mode: 16.5 mA/channel
    • 75% bias mode: 12.5 mA/channel
    • 50% bias mode: 8.5 mA/channel
    • Off-Line mode: 2.4 mA/channel
  • Bipolar-supply range: ±3.5 V to ±6.5 V
  • Single-supply range: 5.75 V to 13 V
  • High slew rate: 3500 V/µs
  • Overtemperature protection circuit
  • Output current limit (±1 A)

The OPA2673 provides the high output current and low distortion required for power-line modem driver and test and measurement applications. The OPA2673 operates on power-supplies ranging from 5.75 V to 13 V and consumes a low 16.5 mA/channel quiescent current to deliver a very high 700 mA output current. The OPA2673 supports the most demanding power-line modem requirements with an 460 mA specified minimum output current drive (at 25°C).

Power-control features are included to minimize system power consumption. Two logic-control lines allow for four quiescent power settings, full power, 75% bias power, 50% bias power, and offline mode with active offline control, to provide high impedance to large signals present at the output pin. The two channels of the OPA2673 can be used independently as individual op amps, or can be configured as a differential-input to differential-output, high-current line driver.

The OPA2673 provides the high output current and low distortion required for power-line modem driver and test and measurement applications. The OPA2673 operates on power-supplies ranging from 5.75 V to 13 V and consumes a low 16.5 mA/channel quiescent current to deliver a very high 700 mA output current. The OPA2673 supports the most demanding power-line modem requirements with an 460 mA specified minimum output current drive (at 25°C).

Power-control features are included to minimize system power consumption. Two logic-control lines allow for four quiescent power settings, full power, 75% bias power, 50% bias power, and offline mode with active offline control, to provide high impedance to large signals present at the output pin. The two channels of the OPA2673 can be used independently as individual op amps, or can be configured as a differential-input to differential-output, high-current line driver.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
OPA2675 활성 듀얼 채널, 광대역 고전력 출력 전류 피드백 증폭기 Higher performance line driver with higher output current.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet OPA2673 Dual, High Output Current Operational Amplifier With Active Offline Control datasheet (Rev. H) PDF | HTML 2023/06/21
Application brief Power Line Communication in Solar Applications PDF | HTML 2024/12/12
Application brief LiFi: TI High-Speed Products for Optical Wireless Communication PDF | HTML 2023/08/07
Technical article 3 common questions when designing with high-speed amplifiers PDF | HTML 2020/07/17
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017/03/28
Application note Wireline Data Transmission and Reception 2010/01/27
Application note A Powerline Communication Line Driver Requirement Overview 2009/11/04

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DEM-OPA-RGV-EVM — VQFN 패키지와 호환되는 고속 고출력 전류 증폭기용 채우기 전 상태의 평가 모듈

DEM-OPA-RGV-EVM은 VQFN(RGV) 패키지의 TI 듀얼 광대역 연산 증폭기에 사용하는 채우기 전 상태의 평가 모듈(EVM)입니다. 이 EVM은 고속 성능 사양과 TI PLC(전선 통신) 및 전송선 드라이버에 따라 설계되었습니다. 이 EVM은 연구 장비용 50Ω SMA를 사용하는 TI 고속 듀얼 증폭기를 신속하고 효율적으로 랩 테스트할 수 있도록 설계했습니다. 이 EVM은 여러 다른 이득과 싱글 또는 분할 공급 작동용으로 간편하게 구성할 수 있습니다. 2개 채널은 개별 증폭기로 사용하거나 차동 출력 드라이브에 대한 (...)
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
시뮬레이션 모델

OPA2673 PSpice Model

SBOM338.ZIP (5 KB) - PSpice Model
시뮬레이션 모델

OPA2673 TINA-TI Reference Design

SBOM339.TSC (36 KB) - TINA-TI Reference Design
시뮬레이션 모델

OPA2673 TINA-TI Spice Model

SBOM340.TSM (29 KB) - TINA-TI Spice Model
계산 툴

ANALOG-ENGINEER-CALC PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGV) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상