LP875761-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the
Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- Input Voltage: 2.8 V to 5.5 V
- Output Voltage: 1.0 V
- Four High-Efficiency Step-Down
DC/DC Converter Cores:
- Maximum Output Current: 16 A (4 A per Phase)
- Switching Frequency: 3 MHz
- Spread-Spectrum Mode and Phase Interleaving
- Configurable General Purpose I/O (GPIOs)
- I2C-Compatible Interface That Supports Standard (100 kHz), Fast (400 kHz), Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes
- Interrupt Function With Programmable Masking
- Programmable Power-Good Signal (PGOOD)
- Output Short-Circuit and Overload Protection
- Overtemperature Warning and Protection
- Overvoltage Protection (OVP) and Undervoltage Lockout (UVLO)
The LP875761-Q1 device is designed to meet the power-management requirements of the latest processors and platforms in various automotive power applications. The device contains four step-down DC/DC converter cores, which are configured as a 4-phase output in forced-PWM mode. The device is controlled by an I2C-compatible serial interface and by enable signals.
The LP875761-Q1 supports remote differential-voltage sensing for multiphase outputs to compensate IR drop between the regulator output and the point-of-load (POL) which improves the accuracy of the output voltage. The switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances.
The LP875761-Q1 device supports load-current measurement without the addition of external current-sense resistors. The LP875761-Q1 device also supports programmable start-up and shutdown delays and sequences synchronized to enable signals. The sequences can also include GPIO signals to control external regulators, load switches, and processor reset. During start-up, the device controls the output slew rate to minimize output-voltage overshoot and in-rush current.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LP875761-Q1 Four-Phase 3-MHz 1-V 16-A DC/DC Buck Converter With Integrated Switches datasheet | PDF | HTML | 2020. 12. 9 | |
| 사용 설명서 | LP875761A-Q1 Technical Reference Manual | PDF | HTML | 2020. 9. 21 | ||
| 인증서 | LP875761Q1EVM EU Declaration of Conformity (DoC) | 2020. 8. 13 | |||
| 애플리케이션 노트 | Power supply design for mobileye eyeQ4 high using LP875761-Q1 | PDF | HTML | 2019. 2. 22 |
설계 및 개발
전원 공급 솔루션
LP875761-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
PEET-GUI — TPS6594-Q1, LP8756-Q1, LP8758, LP8770 및 TPS650330-Q1용 효율성 예측 툴
TIPA-050040 — LP875761-Q1을 사용한 Mobileye EyeQ4 고전력 공급 장치 설계
이 전원 공급 장치 설계는 LP875761-Q1 전원 관리 IC를 사용하는 Mobileye EyeQ4® High SoC(System-on-Chip) 코어 레일의 전원 고려 사항을 자세히 설명합니다. 이 전원 솔루션은 입력 전압을 3.3V 또는 5V( ± 5%)로 가정합니다. 예를 들어 차량 배터리와 같이 시스템 입력 전압이 더 높은 경우 사전 레귤레이터로 벅 컨버터를 사용하여 3.3V 또는 5V의 공급 전압을 생성해야 합니다.
LP875761-Q1에는 단일 1V 출력 다중 위상 컨버터로 작동하도록 구성된 4개의 벅 컨버터가 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RNF) | 26 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.