LP87523-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- Input Voltage: 2.8 V to 5.5 V
- Output Voltage: 0.6 V to 3.36 V
- Four High-Efficiency
Step-Down DC/DC Converter Cores:
- Maximum Output Current: 10 A
- Switching Frequency: 2 MHz
- Spread-Spectrum Mode and Phase Interleaving
- Configurable General Purpose I/O (GPIOs)
- I2C-Compatible Interface That Supports Standard (100 kHz), Fast (400 kHz), Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes
- Interrupt Function With Programmable Masking
- Programmable Power-Good Signal (PGOOD)
- Output Short-Circuit and Overload Protection
- Overtemperature Warning and Protection
- Overvoltage Protection (OVP) and Undervoltage Lockout (UVLO)
The LP8752x-Q1 device is designed to meet the power-management requirements of the latest processors and platforms in various automotive power applications. The device contains four step-down DC/DC converter cores, which are configured as a 4-phase output, 3-phase and 1-phase outputs, 2-phase and 2-phase outputs, one 2-phase and two 1-phase outputs, or four 1-phase outputs. The device is controlled by an I2C-compatible serial interface and by enable signals.
The automatic pulse-width-modulation (PWM) to pulsed-frequency-modulation (PFM) operation (AUTO mode), together with the automatic phase adding and phase shedding, maximizes efficiency over a wide output-current range. The LP8752x-Q1 supports remote differential-voltage sensing for multiphase outputs to compensate IR drop between the regulator output and the point-of-load (POL) improving the accuracy of the output voltage. The switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances.
The LP8752x-Q1 device supports load-current measurement without the addition of external current-sense resistors. The device also supports programmable start-up and shutdown delays and sequences synchronized to enable signals. The sequences can include GPIO signals to control external regulators, load switches, and processor reset. During start-up and voltage change, the device controls the output slew rate to minimize output-voltage overshoot and in-rush current.
추가 정보 요청
고장 모드, 영향 및 진단 분석(FMEDA), 안전 분석 보고서 및 안전 매뉴얼과 같은 기능 안전 정보를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | LP8752x-Q1 10-A Buck Converter With Integrated Switches datasheet | PDF | HTML | 2018. 3. 15 | ||
| * | 사용 설명서 | LP875230E Technical Reference Manual | PDF | HTML | 2024. 1. 30 | ||
| * | 사용 설명서 | LP875230D-Q1 Technical Reference Manual | PDF | HTML | 2023. 4. 26 | ||
| * | 사용 설명서 | LP875230C-Q1 Technical Reference Manual | PDF | HTML | 2021. 9. 2 | ||
| * | 사용 설명서 | LP87523J-Q1 Technical Reference Manual | 2019. 3. 28 | |||
| 사용 설명서 | LP8752x-Q1 Configuration Guide (Rev. A) | PDF | HTML | 2025. 7. 30 | |||
| 애플리케이션 노트 | Power Supply Design for Semidrive G9H (G9V/Q/X Compatible) Using LP87565V-Q1 and LP875230C-Q1 | PDF | HTML | 2025. 3. 4 | |||
| 애플리케이션 노트 | Power Supply Design for Semidrive X9H Using LP875230C-Q1 and LP87565V-Q1 | PDF | HTML | 2022. 5. 16 | |||
| Application brief | The Benefits of FlexPower PMIC Devices (Rev. B) | PDF | HTML | 2020. 11. 23 | |||
| 애플리케이션 노트 | How to Design Flexible Processor Power Systems Using PMICs (Rev. B) | 2020. 1. 27 | ||||
| 애플리케이션 노트 | Stability Considerations for LP8756x-Q1 and LP8752x-Q1 | PDF | HTML | 2019. 6. 4 |
설계 및 개발
전원 공급 솔루션
LP87523-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
LP87563Q1EVM — 스위치가 통합된 삼중 출력 8A + 4A + 4A 벅 컨버터 평가 모듈
LP87563Q1EVM은 텍사스 인스트루먼트의 통합 회로 LP87563-Q1을 보여줍니다.
LP87563-Q1은 차량용 애플리케이션의 최신 애플리케이션 프로세서의 전원 관리 요구 사항을 충족하도록 설계된 고성능 다중 위상 스텝다운 컨버터입니다. 이 장치에는 이중 위상 벅 컨버터와 두 개의 단일 위상 벅 컨버터로 구성된 스텝다운 DC-DC 컨버터 코어 4개가 포함되어 있습니다. LP87563-Q1은 솔루션 크기와 효율성을 탁월하게 조합하여 최대 8A + 4A + 4A의 부하 전류를 지원할 수 있습니다. 이 장치는 PC 및 제공된 (...)
PEET-GUI — TPS6594-Q1, LP8756-Q1, LP8758, LP8770 및 TPS650330-Q1용 효율성 예측 툴
TIDEP-01002 — Jacinto™ 차량용 프로세서를 갖춘 비용 최적화된 디지털 클러스터 오토모티브 레퍼런스 설계
Jacinto™ 차량용 프로세서 DCARD(디지털 클러스터 차량용 레퍼런스 디자인)는 재구성 가능한 디지털 클러스터 시스템을 위한 비용 최적화된 설계입니다. DCARD는 전체 시스템 BOM을 최적화하면서 1920x720 해상도 디스플레이에서 60fps 디지털 클러스터 솔루션을 구현할 수 있는 완전한 독립적 6계층 PCB 설계입니다. 또한 DCARD는 경고음, CAN 웨이크업 및 이더넷 연결을 위한 단일 존 오디오 출력도 지원합니다. 최종 제품 요구 사항을 기반으로 기능을 추가할 수 있습니다. 예를 들어, 카메라 입력은 후방 뷰 (...)
TIPA-050043 — 차량용 애플리케이션을 위한 X9H 전원 공급 장치 설계
SemiDrive X9H 차량용 SoC를 위한 이 전원 공급 장치 설계는 차량용 인포테인먼트 및 전자 콕핏 애플리케이션에 최적화되어 있습니다. LP87565-Q1 및 LP87523-Q1 전원 관리 IC(PMIC)를 사용한 전원 설계의 설계 고려 사항에 대해 자세히 설명합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RNF) | 26 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.