LP5951
- Input Voltage Range: 1.8 V to 5.5 V
- Output Voltage Range: 1.3 V to 3.7 V
- Excellent Line Transient Response: ±2 mV (typical)
- Excellent PSRR: –60 dB at 1 kHz typical
- Low Quiescent Current of 29 µA typical
- Small SC70-5 and SOT-23-5 Packages
- Fast Turnon Time of 30 µs typ.
- Typical < 1 nA Quiescent Current in Shutdown
- Ensured 150-mA Output Current
- Logic Controlled Enable 0.4 V/0.9 V
- Good Load Transient Response of 50 mVpp (typical)
- Thermal Overload and Short-Circuit Protection
- -40°C to 125°C Junction Temperature Range
The LP5951 regulator is designed to meet the requirements of portable battery-powered systems providing a regulated output voltage and low quiescent current. When switched to shutdown mode via a logic signal at the Enable (EN) pin, the power consumption is reduced to virtually zero.
The LP5951 is designed to be stable with small 1-µF ceramic capacitors. The device also features internal protection against short-circuit currents and over-temperature conditions.
Performance is specified for a –40°C to 125°C temperature range.
The device is available in fixed output voltages in the range of 1.3 V to 3.7 V. For availability, please contact your local TI sales office.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LP5951 Micropower, 150-mA Low-Dropout CMOS Voltage Regulator datasheet (Rev. G) | PDF | HTML | 2014. 12. 15 | |
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LDC2114EVM — LDC2114 1.8V 4채널 인덕티브 터치 평가 모듈
TMP114EVM — 초저 높이, 1.2V 고정밀 온도 센서용 TMP114 평가 모듈
이 모듈은 EVM 보드의 센서와 호스트 컨트롤러 사이에 구멍이 뚫려 있도록 설계되었습니다. 천공을 통해 유연하게 평가할 수 있습니다.
- 사용자는 TMP114를 사용자의 시스템/호스트에 연결할 수 있습니다.
- 사용자는 TMP114 장치를 사용하여 EVM 호스트와 (...)
TIDA-00460 — 유도성 선형 위치 감지 부스터팩 레퍼런스 디자인
Typical implementations of distance measurements use expensive rare-earth magnets. To lower overall system cost, this reference design walks through the implementation of industry’s first inductance-to-digital converters from TI for linear position sensing without the use of any expensive (...)
TIDA-00563 — 인덕티브 근접 스위치 부스터팩 레퍼런스 디자인
TIDA-00563 offers highly-integrated analog front end (AFE) inductance-to-digital converters (LDCs) optimized for use in industrial proximity sensors for contactless and robust applications such as presence detection and event counting. Inductive sensing technology provides reliable and accurate (...)
TIDA-00615 — LDC1312/LDC1314를 사용하는 인덕티브 센서 32-위치 인코더 노브 레퍼런스 디자인
유도성 감지 기반 증분 인코더 노브 설계는 제어 입력을 위한 견고한 저비용 인터페이스를 제공할 수 있습니다. 먼지, 습기나 기름으로 인해 대체 센서 기술이 필요한 환경에서 안정적으로 작동합니다. 이 솔루션은 자석이 필요하지 않습니다.
TIDA-00828 — LDC0851을 사용하는 인덕티브 센서 32-위치 인코더 노브 레퍼런스 설계
TIDA-00851-LDC0851 — LDC0851 이벤트 카운팅 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
| SOT-SC70 (DCK) | 5 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.