LP2985A
- VIN range (new chip): 2.5V to 16V
- VOUT range (new
chip):
- 1.2V to 5.0V (fixed, 100mV steps)
- VOUT accuracy:
- ±1% for A-grade (legacy chip)
- ±1.5% for standard-grade (legacy chip)
- ±0.5% (new chip)
- ±1% output accuracy over load and temperature (new chip)
- Output current: Up to 150mA
- Low IQ (new chip): 71µA at ILOAD = 0mA
- Low IQ (new chip): 750µA at ILOAD = 150mA
- Shutdown current:
- 0.01µA (typ, legacy chip)
- 1.12µA (typ, new chip)
- Low noise: 30µVRMS with 10nF bypass capacitor
- Output current limiting and thermal protection
- Stable with 2.2µF ceramic capacitors (new chip)
- High PSRR: 70dB at 1kHz, 40dB at 1MHz (new chip)
- Operating junction temperature: –40°C to +125°C
- Package: 5-pin SOT-23 (DBV)
The LP2985 is a fixed-output, wide-input, low-noise, low-dropout voltage regulator supporting an input voltage range from 2.5V to 16V (for new chip) and up to 150mA of load current. The LP2985 supports an output range of 1.2V to 5.0V (for new chip).
Additionally, the LP2985 (new chip) has a ±1% output accuracy across load, and temperature that can meet the needs of low-voltage microcontrollers (MCUs) and processors.
Low output noise of 30µVRMS (with 10nF bypass capacitors) and wide bandwidth PSRR performance of greater than 70dB at 1kHz and 40dB at 1MHz help attenuate the switching frequency of an upstream DC/DC converter and minimize post regulator filtering.
The new chip provides internal soft-start mechanism to reduce inrush current during start up, thus minimizing input capacitance. Standard protection features, such as overcurrent and overtemperature protection, are also included.
The LP2985 is available in a 5-pin 2.9mm × 2.8mm SOT-23 (DBV) package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LP2985 150mA, Low-Noise, Low-Dropout Regulator With Shutdown datasheet (Rev. S) | PDF | HTML | 2025. 5. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PMP23332 — 인터리브 및 다중 위상 인버팅 벅-부스트 컨버터 레퍼런스 설계
이 레퍼런스 설계는 UCD3138064A를 디지털 컨트롤러로 사용하여 2상 피크 전류 모드 제어를 지원하는 기능으로 인버팅 벅-부스트를 제어합니다. 이 설계에는 전력 효율을 향상시키기 위해 소프트 스위칭 기술이 사용됩니다. 입력 전압 범위는 -62V~-36V입니다. 출력 전압 범위는 28V~52V까지 조정 가능합니다. 기본 출력 전압은 48V이며 최대 전류는 14A입니다
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.