LMH6401
- 3-dB Bandwidth: 4.5 GHz at 26-dB Gain
- Gain Range: –6 dB to 26 dB in 1-dB Steps
- Differential Input Impedance: 100 Ω
- Differential Output with Common-Mode Control
- Distortion at Max Gain (VO = 2 VPPD, RL = 200 Ω):
- 200 MHz: HD2 at –73 dBc, HD3 at –80 dBc
- 500 MHz: HD2 at –68 dBc, HD3 at –72 dBc
- 1 GHz: HD2 at –63 dBc, HD3 at –63 dBc
- 2 GHz: HD2 at –58 dBc, HD3 at –54 dBc
- Output IP3:
- 43 dBm at 200 MHz
- 33 dBm at 1 GHz
- 27 dBm at 2 GHz
- Output IP2:
- 67 dBm at 200 MHz
- 60 dBm at 1 GHz
- 52 dBm at 2 GHz
- 8-dB Noise Figure at 1 GHz, RS = 100 Ω
- 82-ps Rise, Fall Time Pulse Response
- Supply Operation: 5.0 V at 69 mA
- Supports Single- and (±) Split-Supply Operation:
- DC- and AC-Coupled Applications
- Fabricated on an Advanced Complementary BiCMOS Process
- 3-mm × 3-mm UQFN-16 Package
The LMH6401 is a wideband, digitally-controlled, variable-gain amplifier (DVGA) designed for dc to radio frequency (RF), intermediate frequency (IF), and high-speed time-domain applications. The device is an ideal analog-to-digital converter (ADC) driver for dc- or ac-coupled applications that require an automatic gain control (AGC).
Noise and distortion performance is optimized to drive ultra-wideband ADCs. The amplifier has an 8-dB noise figure at maximum gain and a –63-dBc harmonic distortion at 1 GHz for full-scale signal levels. The device supports both single- and split-supply operation for driving an ADC. A common-mode reference input pin is provided to align the amplifier output common-mode with the ADC input requirements.
Gain control is performed via an SPI™ interface, allowing a 32-dB gain range from –6 dB to 26 dB in 1-dB steps. A power-down feature is also available through the external PD pin or SPI control.
This level of performance is achieved at a low power level of 345 mW. The operating ambient temperature range is –40°C to 85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LMH6401 DC to 4.5 GHz, Fully-Differential, Digital Variable-Gain Amplifier datasheet (Rev. A) | PDF | HTML | 2015. 5. 19 | |
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| 애플리케이션 노트 | ADC32RF45: Amplifier to ADC Interface (Rev. A) | 2016. 9. 7 | |||
| 기술 문서 | Disentangle RF amplifier specs: output voltage/current and 1dB compression point | PDF | HTML | 2016. 6. 9 | ||
| 기술 문서 | Disentangle RF amplifier specs: intermodulation distortion and intercept points | PDF | HTML | 2016. 4. 19 | ||
| 기술 문서 | Disentangling RF amplifier specs: amplifier spot noise vs. noise figure | PDF | HTML | 2016. 2. 5 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LMH6401EVM — LMH6401 평가 모듈
The LMH6401 Evaluation module (EVM) is used to evaluate the single LMH6401, digitally-controlled variable-gain amplifier (DVGA) in a 16-lead high-performance RF package. The EVM is designed to quickly and easily demonstrate the functionality and performance of LMH6401 across all the gain (...)
SBOC451 — LMH6401EVM GUI
TIDA-00654 — 계단식 LMH5401 및 LMH6401 레퍼런스 디자인
DC 및 AC 결합 애플리케이션 모두에 광대역 단일 종단-차동 변환 레퍼런스 디자인이 제공됩니다. 이 설계는 LMH5401 및 LMH6401 캐스케이드 성능을 평가하고 설계에 대한 통찰력을 제공합니다.
TIDA-00822 — AC 및 DC 결합 가변 게인 증폭기를 지원하는 16비트 1GSPS 디지타이저 레퍼런스 디자인
This reference design discusses the use and performance of the Digital Variable-Gain high-speed amplifier, the LMH6401, to drive the high-speed analog-to-digital converter (ADC), the ADS54J60 device. Different options for common-mode voltages, power supplies, and interfaces are discussed and (...)
TIDA-00823 — AC 및 DC 결합 고정 게인 증폭기를 지원하는 16비트 1GSPS 디지타이저 레퍼런스 디자인
TIDA-00826 — 50Ohm, 2GHz 오실로스코프 프론트 엔드 레퍼런스 디자인
This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
TIDA-010122 — 멀티 채널 RF 시스템용 데이터 컨버터 DDC 및 NCO 기능을 동기화하는 레퍼런스 설계
이 레퍼런스 설계는 mMIMO(massive multiple input multiple output, 대규모 다중 입력 다중 출력), 위상 어레이 레이더 및 통신 페이로드 같은 새로운 5G 적응 애플리케이션과 관련한 동기화 설계 문제를 해결합니다. 일반적인 RF 프런트 엔드에는 아날로그 도메인에서 안테나 LNA(저잡음 증폭기), 믹서, LO(로컬 오실레이터), 디지털 도메인에서 아날로그-디지털 컨버터, NCO(숫자 제어 오실레이터) 및 DDC(디지털 다운 컨버터) 등이 포함되어 있습니다. 전체 시스템 동기화를 달성하려면 이 디지털 (...)
TIDA-010128 — 12비트 디지타이저용 확장 가능한 20.8GSPS 레퍼런스 설계
TIDA-01022 — DSO, 레이더, 5G 무선 테스트 시스템용 유연한 3.2GSPS 멀티 채널 AFE 레퍼런스 설계
TIDA-01028 — 고속 오실로스코프 및 광대역 디지타이저를 위한 12.8GSPS 아날로그 프론트 엔드 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| UQFN-HR (RMZ) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.