LM74930-Q1
- AEC-Q100 qualified for automotive applications
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- 4-V to 65-V input range
- Reverse input protection down to –65 V
- Drives external back-to-back N-Channel MOSFETs in common source configuration
- Ideal diode operation with 10.5-mV A to C forward voltage drop regulation
- Low reverse detection threshold (–10.5 mV) with fast DGATE turn-off response (0.5 µs)
- 18-mA peak gate (DGATE) turn on current
- 2.6-A peak DGATE turn-off current
- Adjustable overcurrent and short circuit protection
- Analog current monitor output with 10% accuracy (IMON)
- Adjustable overvoltage and undervoltage protection
- Low 2.5-µA shutdown current (EN=Low)
- MODE pin to allow bi-directional current flow (MODE=Low)
- Meets automotive ISO7637 transient requirements with a suitable TVS diode
-
Available in space saving 24-pin VQFN package
The LM74930-Q1 ideal diode controller drives and controls external back to back N-Channel MOSFETs to emulate an ideal diode rectifier and power path ON and OFF control with over current and overvoltage protection. The wide input supply of 4 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs. The device can withstand and protect the loads from negative supply voltages down to –65 V. An integrated high side gate control (HGATE) drives the first MOSFET in the power path. The device allows load disconnect (ON and OFF control) in case of overcurrent, overvoltage and undervoltage event using HGATE control while ideal diode controller (DGATE) drives a second MOSFET to replace a Schottky diode for input reverse polarity protection and output voltage holdup by blocking the reverse current from output to input. The device has integrated current sense amplifier which provides with an adjustable overcurrent and short circuit protection with circuit breaker functionality. The device features an adjustable overvoltage and undervoltage protection feature to protect against supply transients. LM74930-Q1 features MODE pin which can be used to selectively enable or disable reverse current blocking functionality.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM74930-Q1 Automotive Ideal Diode Surge Stopper With Circuit Breaker, Overvoltage Protection, and Fault Output datasheet | PDF | HTML | 2023. 10. 31 | |
| 애플리케이션 노트 | Achieving Functional Safety Goals for DC/DC Converters Using | PDF | HTML | 2026. 5. 22 | ||
| 기능 안전 정보 | LM74930-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2024. 10. 16 | ||
| Application brief | Protection against Unsuppressed Load Dump in Automotive Systems using LM74930-Q1 | PDF | HTML | 2023. 11. 14 | ||
| 인증서 | LM74930Q1EVM EU Declaration of Conformity (DoC) | PDF | HTML | 2023. 10. 5 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM74930Q1EVM — 회로 차단기가 있는 3V~65V 서지 스토퍼용 LM74930-Q1 평가 모듈
LM74930-Q1 평가 모듈(EVM)은 역방향 배터리 보호 애플리케이션에서 LM74930-Q1 최적 다이오드 컨트롤러의 작동 및 성능을 평가하기 위한 플랫폼입니다. LM74930Q1EVM은 LM74930-Q1이 서지 스토퍼, 회로 차단기 및 과전압 보호를 지원하는 이상적인 다이오드 정류기를 에뮬레이션하기 위해 2개의 역병렬 N-채널 전원 MOSFET을 제어하는 방법을 보여줍니다.
LM74930-CALC — Design calculator for LM74930-Q1 ideal diode controller
PMP23468 — 오디오 시스템을 위한 48V 입력, 875W 피크 전력, 다중 위상 벅 컨버터 레퍼런스 설계
이 레퍼런스 설계는 차량용 오디오 시스템을 위한 보호 및 전원을 제공합니다. 48VDC 입력으로 작동은 최대 출력 전압 범위에서 테스트되었습니다. 6VDC ~ 35VDC. 이 설계는 공칭 부하에서 97%의 피크 효율을 나타내며, 6VDC와 35VDC 사이의 부하 전환에 대해 상당한 출력 전압 언더슈트와 오버슈트가 없습니다. 이 테스트 보고서에는 보드 플롯, 스위칭 파형, 부하 과도 응답, 시동 및 셧다운 파형, 열 이미지를 포함하여 출력 전압 범위 및 부하를 아우르는 작동 데이터가 포함됩니다.
TIDA-020106 — EMB(전기 기계식 제동) 레퍼런스 설계
EMB(전기 기계식 제동)는 자동차의 전기화와 지능화를 목표로 하는 새로운 유형의 제동 기술로, 고급 자율 주행을 위한 전반적인 비용 절감, 더 빠른 응답, 더 정밀한 작동을 제공합니다. 이 레퍼런스 설계는 완전한 기능을 갖춘 EMB 설계를 보여줍니다. 이 가이드에는 하드웨어, 소프트웨어 및 기능 안전 설계가 모두 설명되어 있습니다. EPS(전동 파워 스티어링)는 EMB와 매우 유사한 주요 구성 요소를 가지고 있으므로, 이 레퍼런스 설계는 EPS에도 사용할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.